Eurotech B750SLY

Specifications

Model B750SLY
Maximum bar capacity 4.02”
Maximum machining diameter 18.4”
Maximum machining length 29.5”
Maximum swing over diameter (bench) 26.7”
MAIN SPINDLE
Spindle Bore 4.3”
Spindle speed range 3,000 RPM
Spindle motor 40 HP
Motor type Wide range
Spindle nose ASA A2-8
Y-axis stroke 5.5”
SUB- SPINDLE  
Bar capacity 1.77” 
Spindle bore 2.15”
Spindle speed range (infinitely variable) 5,000 RPM*
Spindle drive motor  (variable speed) max rating 33HP
Spindle nose 5” Flat Nose
Slide movement (B-axis) NC control
Slide stroke (B-axis) 35”
Rapid traverse rate (B-axis) 945 IPM
Spindle positioning programmable M16 to .001 deg
TURRET
Turret indexing time 1 station 0.3 sec/pos. (1-station)
Turret indexing type Bi-directional
Number of stations
 16
REVOLVING TOOL ATTACHMENT TURRET
Number of positions  16
Drive motor – max. rating (Fanuc) 23 HP
Speed range (infinitely variable) 6,000 RPM
Engagement time immediate
C-AXIS CONTROL W/ SPINDLE POSITIONING
Spindles Main and Sub
Spindle positioning Full “C” 
Minimum command increment 0.001 degree
Positioning system Spindle motor
Degree of movement Programmable
Rapid speed rate 100 RPM
GENERAL INFORMATION
Voltage required 400 volt AC, 3-phase
Air required 80 psi @ 4 CFM
Amperage Draw 75 Amp.
MACHINING DIMENSIONS
Width 80”
Height 88”
Length with chip conveyor 200”
Machine weight with chip conveyor 16,755 lbs.
ACCURACY
Z axis repeatability accuracy +/-.00004”
X  axis positioning accuracy +/-.00006”
C axis positioning accuracy +/-.00005°
C axis repeatability +/-.00001°

NOTE: Horsepower given are the 30 min. ratings.

* Chuck RPM limitations may apply.

Category:

Description

Eurotech Elite
MultiFLEX B750 SLY
Universal Turning Center

MODEL B750 SLY 6-AXIS
TURNING CENTER WITH SUB-SPINDLE, LIVE TOOLS, DUAL C AXES, AND Y-AXIS
• 12” CHUCK, 4.02” Bar Capacity
• 40 HP two speed spindle
• All BOXWAY CONSTRUCTION
• FULL 5.5” of “Y” AXIS STROKE

STANDARD FEATURES

  • Fanuc EASY Plus Control with Custom Operator Panel
  • Tool load monitoring system.
  • 10.4” Graphics parts cutting display.
  • Extended editing functions; merge, change, move, copy.
  • 32-bit CPU high-speed Pentium microprocessor
    CNC system.
  • 3,000 RPM main spindle speed.
  • 40 horsepower wide range constant output 
  • 0.3 seconds/station turret indexing
  • 945 IPM B-axis rapid traverse.
  • 945 IPM Z -axis rapid traverse.
  • 709 IPM X -axis rapid traverse.
  • 295 IPM Y -axis rapid traverse.
  • 12” 3-jaw chuck on main spindle.
  • Rigid tapping; main 
  • High pressure coolant system.
  • Set of static.
  • Programmable tool probe system.
  • 16 Station Turret
  • C-axis control on main 
  • Air conditioned electronics cabinet.
  • Chip conveyor.
  • Programmable parts catcher
  • Eurotech Gap Elimination Ladder Logic for faster cycle time
  • Free lifetime programming classes
  • Free online phone support for both maintenance and programming

EUROTECH FANUC 32i-T CONTROL
STANDARD FEATURES

  • 32-bit hi-speed Pentium CPU
  • 10.4” color LCD display with extensive operator’s panel
  • Full keyboard
  • Graphic parts cutting display
  • Background editing
  • Extended editing functions
    (copy, move, merge, change)
  • Free position turret indexing
  • Tool geometry offsets – 64 pairs
  • Part program storage capacity – 1054 ft.
  • Minimum input resolution – .0001”
  • Absolute/incremental dimensioning system
  • Decimal point programming
  • Direct drawing input.  (A=angle, C=chamfer, R=radius)
  • Radius designation for circular
    interpolation
  • Sub-program nesting up to four deep
  • Sudden interruption protection (crash protection)
  • Canned cycles: turning, drilling, and threading (G80)
  • Multiple repetitive cycles (G70, G71, G72, and G73)
  • By-pass feed and speed override w/M-code
  • Manual rapid traverse
  • Manual pulse generator
  • Programmable data input (G10)
  • Straight, taper, and face threading
  • Thread pull out
  • Constant cutting speed control (G96)
  • Direct spindle speed RPM designation
  • Work coordinate system (G54-G59)
  • Program input of offset amount 
  • Tool nose radius compensation (G40, G41, 42)
  • Workshift
  • Call of Macro programs (G65-G66)
  • Custom Macro A and B
  • B-axis offset
  • 125 registered programs 
  • Up to three M-codes per line
  • Six additional M-codes
  • Program protect
  • Chuck and tailstock barrier
  • Preset parts counter
  • Run time, cycle time, and parts counter display
  • Preventive maintenance screen
  • RS232C & PCMCIA (serial) interface
  • Error detect
  • Advanced diagnostic functions
  • Display of axis and spindle motor current loads
  • Alarm message system 
  • SBS Tool Load Monitoring

 

Reviews

There are no reviews yet.

Be the first to review “Eurotech B750SLY”

Your email address will not be published. Required fields are marked *

Related products

Compare listings

Compare