Description
FH400J
The FH400J is a compact, high-speed horizontal machining center featuring a 15,000 RPM spindle, tool-to-tool cycle time of .9 seconds, and a rapid feedrate of 2,362 ipm (60 m/min).
FERROUS SPECS
| Pallet Size | 15.75″ x 15.75″ (400 mm x 400 mm) |
| Table Index | Full NC table (360,000 positions) |
| X-Axis Travel | 23.62” (600 mm) |
| Y-Axis Travel | 22.05” (560 mm) |
| Z-Axis Travel | 24.80” (630 mm) |
| Max Workpiece Swing | 24.80” (630 mm) |
| Max Workpiece Height | 35.43″ (900 mm) |
| Maximum Work Load on the Pallet | 880 lb (400 kg) |
| Spindle Output Torque | 123 ft-lb (167 Nm) |
| Available Spindle | CAT #40 30 HP 15,000 RPM (0-15,000 in 1.9 sec) |
| Rapid Feedrate (X axis) | 2,362 ipm (60 m/min) |
| Rapid Feedrate (Y axis) | 2,362 ipm (60 m/min) |
| Rapid Feedrate (Z axis) | 2,362 ipm (60 m/min) |
| Tool Storage Capacity | 60 Standard (119 Optional) |
| Standard Floor Space | 83″ x 166″ (2,100 mm x 4,205 mm) |
| Machine Height | 108″ (27,735 mm) |
| Standard Net Weight | 24,200 lb (11,000 kg) |
NON-FERROUS SPECS
| Pallet Size | 15.75″ x 15.75″ (400 mm x 400 mm) |
| Table Index | Full NC table (360,000 positions) |
| X-Axis Travel | 23.62” (600 mm) |
| Y-Axis Travel | 22.05” (560 mm) |
| Z-Axis Travel | 24.80” (630 mm) |
| Max Workpiece Swing | 24.80” (630 mm) |
| Max Workpiece Height | 35.43″ (900 mm) |
| Maximum Work Load on the Pallet | 880 lb (400 kg) |
| Spindle Output Torque | 123 ft-lb (167 Nm) |
| Available Spindle | CAT #40 30 HP 15,000 RPM (0-15,000 in 1.9 sec) |
| Rapid Feedrate (X axis) | 2,362 ipm (60 m/min) |
| Rapid Feedrate (Y axis) | 2,362 ipm (60 m/min) |
| Rapid Feedrate (Z axis) | 2,362 ipm (60 m/min) |
| Tool Storage Capacity | 60 Standard (119 Optional) |
| Standard Floor Space | 83″ x 166″ (2,100 mm x 4,205 mm) |
| Machine Height | 108″ (27,735 mm) |
HIGH TEMP ALLOY SPECS
| Pallet Size | 15.75″ x 15.75″ (400 mm x 400 mm) |
| Table Index | Full NC table (360,000 positions) |
| X-Axis Travel | 23.62” (600 mm) |
| Y-Axis Travel | 22.05” (560 mm) |
| Z-Axis Travel | 24.80” (630 mm) |
| Max Workpiece Swing | 24.80” (630 mm) |
| Max Workpiece Height | 35.43″ (900 mm) |
| Maximum Work Load on the Pallet | 880 lb (400 kg) |
| Spindle Output Torque | 123 ft-lb (167 Nm) |
| Available Spindle | CAT #40 30 HP 15,000 RPM (0-15,000 in 1.9 sec) |
| Rapid Feedrate (X axis) | 2,362 ipm (60 m/min) |
| Rapid Feedrate (Y axis) | 2,362 ipm (60 m/min) |
| Rapid Feedrate (Z axis) | 2,362 ipm (60 m/min) |
| Tool Storage Capacity | 60 Standard (119 Optional) |
| Standard Floor Space | 83″ x 166″ (2,100 mm x 4,205 mm) |
| Machine Height | 108″ (27,735 mm) |
| Standard Net Weight | 24,200 lb (11,000 kg) |
ACCURACY
| Linear Position Accuracy | ± .00012″ (.003 mm) full stroke |
| Linear Repeatability | ± .00006″ (.0015 mm) |
| Rotary Table Index Accuracy | ± 7 arc seconds |
| Rotary Table Index Repeatability | ± 3.5 arc seconds |
REEQUIREMENTS
| Hydraulic Oil | Mobil DTE Oil Light (4.75 gal) |
| Slideway Lubrication | Mobil Vactra #2 (.76 gal) |
| Spindle Bearing Lubrication | Mobil Velocite #6 (.76 gal) |
| Spindle Cooling | Mobil Velocite #3 (4 gal) |
| Table Lubrication | Mobil Gear 600 XP 150 (.4 gal) |
| Air Source | 56 ~ 70 psi (4 ~ 5 kgf / cm²) |
| Power Capacity (Machine Wired: 208V – Transformer Not Included) | 52 kVA |
Reviews
There are no reviews yet.