Description
FH450S
The FH450S is a high-speed horizontal machining center featuring a 15,000 RPM spindle, tool-to-tool cycle time of 1.3 seconds, and a rapid feedrate of 1,968 ipm (50 m/min).
FERROUS SPECS
| Pallet Size | 17.7″ x 17.7″ (450 mm x 450 mm) |
| Table Index | Full NC table (360,000 positions) |
| X-Axis Travel | 23.62” (600 mm) |
| Y-Axis Travel | 23.62” (600 mm) |
| Z-Axis Travel | 23.62” (600 mm) |
| Max Workpiece Swing | 24.80” (630 mm) |
| Max Workpiece Height | 35.43″ (900 mm) |
| Maximum Work Load on the Pallet | 880 lb (400 kg) |
| Spindle Output Torque | 123 ft-lb (167 Nm) |
| Available Spindle | CAT#40 30 HP 15,000 RPM (0-15,000 in 1.9 sec) |
| Available Spindle | CAT#40 30 HP 20,000 RPM (0-20,000 in 2.4 sec) |
| Rapid Feedrate (X axis) | 1,968 ipm (50 m/min) |
| Rapid Feedrate (Y axis) | 1,968 ipm (50 m/min) |
| Rapid Feedrate (Z axis) | 1,968 ipm (50 m/min) |
| Tool Storage Capacity | 60 Standard (120 Optional) |
| Standard Floor Space | 100″ x 243″ (2,520 mm x 6,159 mm) |
| Machine Height | 125″ (3,160 mm) |
| Standard Net Weight | 25,300 lb (11,500 kg) |
NON-FERROUS SPECS
| Pallet Size | 17.7″ x 17.7″ (450 mm x 450 mm) |
| Table Index | Full NC table (360,000 positions) |
| X-Axis Travel | 23.62” (600 mm) |
| Y-Axis Travel | 23.62” (600 mm) |
| Z-Axis Travel | 23.62” (600 mm) |
| Max Workpiece Swing | 24.80” (630 mm) |
| Max Workpiece Height | 35.43″ (900 mm) |
| Maximum Work Load on the Pallet | 880 lb (400 kg) |
| Spindle Output Torque | 123 ft-lb (167 Nm) |
| Available Spindle | CAT#40 30 HP 15,000 RPM (0-15,000 in 1.9 sec) |
| Available Spindle | CAT#40 30 HP 20,000 RPM (0-20,000 in 2.4 sec) |
| Rapid Feedrate (X axis) | 1,968 ipm (50 m/min) |
| Rapid Feedrate (Y axis) | 1,968 ipm (50 m/min) |
| Rapid Feedrate (Z axis) | 1,968 ipm (50 m/min) |
| Tool Storage Capacity | 60 Standard (120 Optional) |
| Standard Floor Space | 100″ x 243″ (2,520 mm x 6,159 mm) |
| Machine Height | 125″ (3,160 mm) |
| Standard Net Weight | 25,300 lb (11,500 kg) |
HIGH TEMP ALLOY SPECS
| Pallet Size | 17.7″ x 17.7″ (450 mm x 450 mm) |
| Table Index | Full NC table (360,000 positions) |
| X-Axis Travel | 23.62” (600 mm) |
| Y-Axis Travel | 23.62” (600 mm) |
| Z-Axis Travel | 23.62” (600 mm) |
| Max Workpiece Swing | 24.80” (630 mm) |
| Max Workpiece Height | 35.43″ (900 mm) |
| Maximum Work Load on the Pallet | 880 lb (400 kg) |
| Spindle Output Torque | 123 ft-lb (167 Nm) |
| Available Spindle | CAT#40 30 HP 15,000 RPM (0-15,000 in 1.9 sec) |
| Rapid Feedrate (X axis) | 1,968 ipm (50 m/min) |
| Rapid Feedrate (Y axis) | 1,968 ipm (50 m/min) |
| Rapid Feedrate (Z axis) | 1,968 ipm (50 m/min) |
| Tool Storage Capacity | 60 Standard (120 Optional) |
| Standard Floor Space | 100″ x 243″ (2,520 mm x 6,159 mm) |
| Machine Height | 125″ (3,160 mm) |
| Standard Net Weight | 25,300 lb (11,500 kg) |
ACCURACY
| Linear Position Accuracy | ±.00012″ (.003 mm) full stroke |
| Linear Repeatability | ± .00006″ (.0015 mm) |
| Rotary Table Index Accuracy | ± 7 arc seconds |
| Rotary Table Index Repeatability | ± 3.5 arc seconds |
REEQUIREMENTS
| Hydraulic Oil | Mobil DTE Oil Light (14 gal) |
| Slideway Lubrication | Mobil Vactra #2 (.76 gal) |
| Spindle Bearing Lubrication | Mobil Velocite #6 (.76 gal) |
| Spindle Cooling | Mobil Velocite #3 (4.2 gal) |
| Table Lubrication | Mobil Gear 600 XP 150 (1.1 gal) |
| Air Source | 56 ~ 70 psi (4 ~ 5 kgf / cm²) |
| Power Capacity (Machine Wired: 208V – Transformer Not Included) | 52 kVA |
Reviews
There are no reviews yet.