2011 Hyundai KH80G Horizontal Machining Center
Lamarche Machinery Inc., 8821, 60 Avenue NW, Davies Industrial West, South Industrial District, Edmonton, Alberta, T6E 6L9, Canada👁 31
Address
Open on Google Maps- Address Lamarche Machinery Inc., 8821, 60 Avenue NW, Davies Industrial West, South Industrial District, Edmonton, Alberta, T6E 6L9, Canada
- City Edmonton
- State/county AB Canada
- Zip/Postal Code T6E 6L9
- Country Canada
Details
Updated on October 3, 2025 at 5:21 pm- Listing ID: KH80G
- Year Built: 2011
Description
| 2011 USED KH80G Horizontal Machining Center | |
| Controller with 10.4″ Color LCD | Fanuc 31i-B 10.4″ |
| Travel X,Y,Z | 49.2″ x 39.4″ x 33.5″ |
| Table (2) | 31.5″x31.5″ |
| Max Table Weight Per Table (2) | 4,850 lbs |
| Work Piece ( Dia X Height ) | 45.3″ X 45.3″ |
| Indexing | 0.001 degree |
| Pallet Changing Method | Shuttle Type |
| Pallet Change time | 28 seconds |
| Spindle Center to Table Surface Distance | 1.97″ ~ 41.3″ |
| Spindle Nose to Table Centre Distance | 9.8″ ~ 43.3″ |
| Spindle Taper | CAT 50 |
| Spindle Speed | 4,500 rpm |
| Horsepower | 35 HP (26KW) |
| Number of Gear Ranges | 3 Speed Geared Head |
| Spindle Torque | 1,110 Ft-lbs |
| Tool Magazine – Twin Arm | 80 Tool |
| Tool Change Time | 3.5 Sec |
| X,Y, and Z axis rapid travers rate | 709 ipm |
| Cutting Feed | .04-315 ipm |
| Weight | 47,399 lbs |
| Floor Space (L) w/ Chip conveyor & Tank | 159.4″ |
| Floor space (W) | 263.7 |
| Power required | 56kva/147 amp @ 220v |
| Voltage | 205-235 volts / 3 phase |
| Coolant Thru Spindle | 6bar (87 psi) |
| Optional Equipment Included | |
| Chip Conveyor Rear | |
| Remote MPG | Pulse Generator |
| A02B-0284-J919 Additional Work Coordinate System(300 Pairs) | |
| Additional work coordinate 48 pair | |
| Spiral / conical Interpolation | |
| Coordinate System Rotation | |
| Part program storage | |
| MODULE, (FROM 32MB, SRAM 3MB) | |
| UPGRADE PART PROG STORAGE 2560 M | |
