Hyunda Wia iCUT400M

Description Unit i-CUT400M
Table Size in 25.6″ / 15.75
Max. Load Capacity lbs 661
Spindle Driving Method Direct
Spindle Taper BBT30
Spindle RPM r/min 24,000
Spindle Power hp 30/4.7
Spindle Torque ft.lbs 17.7/2.7
Travel(X/Y/Z) in 19.7 / 15.75″ / 13″
Rapid Feed Rate(X/Y/Z) in/min 220/220/220
Slide Type LM
No. of Tools EA 14
Tool Change Time
(Chip To Chip)
sec 1.89

 

Specifications are subject to change without notice for quality improvement.
In case of any further information, please refer to the machine catalog.

Description

Features

  • High Speed Direct Spindle i-CUT400T : 12,000 [15,000]rpm / i-CUT400M : 24,000rpm
  • Spindle Acceleration/Deceleration 0 → 24,000 RPM : 1.6 sec.
  • Rapid Feedrate in Each Axis 56m/min (Z axis Acceleration/Deceleration up to “1.27G”)
  • Rigid Tapping up to 6,000rpm
  • Weight reduction and added rigidity through FEM structural analysis

Specifications (metric)

Description Unit i-CUT400T i-CUT400M
Table Size mm 650×400
Max. Load Capacity kg 300
Spindle Driving Method Direct
Spindle Taper BBT30
Spindle RPM r/min 12,000 24,000
Spindle Power kW 14.1/4.1 22.6/3.5
Spindle Torque N.m 45/21 24/3.7
Travel(X/Y/Z) mm 500/400/330
Rapid Feed Rate(X/Y/Z) m/min 56/56/56
Slide Type LM
No. of Tools EA 14
Tool Change Time
(Chip To Chip)
sec 1.89

Description Unit i-CUT400T i-CUT400M
Table Size in 25.6″ / 15.75
Max. Load Capacity lbs 661
Spindle Driving Method Direct
Spindle Taper BBT30
Spindle RPM r/min 12,000 24,000
Spindle Power hp 19/5.5 30/4.7
Spindle Torque ft.lbs 33/15.5 17.7/2.7
Travel(X/Y/Z) in 19.7 / 15.75″ / 13″
Rapid Feed Rate(X/Y/Z) in/min 220/220/220
Slide Type LM
No. of Tools EA 14
Tool Change Time
(Chip To Chip)
sec 1.89

 

Specifications are subject to change without notice for quality improvement.
In case of any further information, please refer to the machine catalog.

Reviews

There are no reviews yet.

Be the first to review “Hyunda Wia iCUT400M”

Your email address will not be published. Required fields are marked *

Compare listings

Compare