Eurotech B750S

Description

STANDARD FEATURES

• Fanuc EASY Plus Control with Custom Operator Panel
• Tool load monitoring system.
• 10.4” Graphics parts cutting display.
• Extended editing functions; merge, change, move, copy.
• 32-bit CPU high-speed Pentium microprocessor
  CNC system.
• 3,000 RPM main spindle speed.
• 40 horsepower wide range constant output 
• 0.3 seconds/station turret indexing
• 945 IPM B-axis rapid traverse.
• 945 IPM Z -axis rapid traverse.
• 709 IPM X -axis rapid traverse.
• 295 IPM Y -axis rapid traverse.
• 12” 3-jaw chuck on main spindle.
• Rigid tapping; main 
• High pressure coolant system.
• Set of static.
• Programmable tool probe system.
• 16 Station Turret
• C-axis control on main 
• Air conditioned electronics cabinet.
• Chip conveyor.
• Programmable parts catcher
• Eurotech Gap Elimination Ladder Logic for faster cycle time
• Free lifetime programming classes
• Free online phone support for both maintenance and programming

EUROTECH FANUC 32i-T CONTROL
STANDARD FEATURES

• 32-bit hi-speed Pentium CPU
• 10.4” color LCD display with extensive operator’s panel
• Full keyboard
• Graphic parts cutting display
• Background editing
• Extended editing functions
  (copy, move, merge, change)
• Free position turret indexing
• Tool geometry offsets – 64 pairs
• Part program storage capacity – 1054 ft.
• Minimum input resolution – .0001”
• Absolute/incremental dimensioning system
• Decimal point programming
• Direct drawing input.  (A=angle, C=chamfer, R=radius)
• Radius designation for circular
  interpolation
• Sub-program nesting up to four deep
• Sudden interruption protection (crash protection)
• Canned cycles: turning, drilling, and threading (G80)
• Multiple repetitive cycles (G70, G71, G72, and G73)
• By-pass feed and speed override w/M-code
• Manual rapid traverse
• Manual pulse generator
• Programmable data input (G10)
• Straight, taper, and face threading
• Thread pull out
• Constant cutting speed control (G96)
• Direct spindle speed RPM designation
• Work coordinate system (G54-G59)
• Program input of offset amount 
• Tool nose radius compensation (G40, G41, 42)
• Workshift
• Call of Macro programs (G65-G66)
• Custom Macro A and B
• B-axis offset
• 125 registered programs 
• Up to three M-codes per line
• Six additional M-codes
• Program protect
• Chuck and tailstock barrier
• Preset parts counter
• Run time, cycle time, and parts counter display
• Preventive maintenance screen
• RS232C & PCMCIA (serial) interface
• Error detect
• Advanced diagnostic functions
• Display of axis and spindle motor current loads
• Alarm message system 
• SBS Tool Load Monitoring