Yama Seiking - Boring Mills

  • Yama Seiki BL Series

    Specifications

    Model BL-2018FM
    CAPACITY
    X-axis travel 2,000 mm ( 78.74″ )
    Y-axis travel 1,800 mm ( 70.86″ )
    Z-axis travel 1,300 mm ( 51.18″ )
    W-axis travel 600 mm ( 23.62″ )
    Distance nose to table 885 mm ( 34.84″ )
    WORKING TABLE
    Table size ( X x Y ) 1,600 x 1,800 mm
    ( 62.99″ x 70.86″ )
    Table load capacity 12,000 kg ( 26,400 lb )
    SPINDLE
    Spindle taper CAT50
    Spindle power ( cont. / 30 min. ) 22 / 26 kW ( 30 / 35 HP )
    Spindle speed 6,000 rpm
    Spindle motor torque 600 Nm
    Boring spindle size Ram 480 x 470 mm section ( 18.89″ x 18.49″ )
    FEED RATE
    X-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Y-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Z-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    W-axis rapid feed rate 5,000 mm/min. ( 195 IPM )
    Cutting feed rate 1 ~ 5,000 mm/min. ( 1 ~ 195 IPM )
    TOOL MAGAZINE
    Tool magazine capacity 40T
    Max. tool diameter / adj. pocket empty Ø 125 / 250 mm
    ( Ø 4.92″ / 9.84″ )
    Max. tool length ( from gauge line ) 400 mm ( 15.74″ )
    Max. tool weight 25 kg ( 55 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 ) ± 0.01 mm / Full Travel
    ( ± 0.0004″ / Full Travel )
    Positioning accuracy ( VDI 3441 ) P= 0.016 mm / Full Travel
    ( P= 0.00065″ / Full Travel )
    Repeatability ( JIS B 6338 ) ± 0.003 mm
    ( ± 0.00012″ )
    Repeatability ( VDI 3441 ) Ps= 0.012 mm
    ( Ps=0.00047″ )
    GENARAL
    Power requirement 70 kVA, 220±10%, 3 phase, 50/60 Hz
    Pneumatic pressure requirement 5 ~ 8 ( 5 ) kg/cm2
    ( 70 ~ 110 ( 70 ) PSI )
    Lubrication oil tank capacity 4.6 liter
    ( 1.22 gal )
    Coolant tank capacity 400 liter
    ( 105.7 gal )
    Machine weight 31,000 kg
    ( 68,350 lb )
    Machine Height 4,460 mm ( 175.59″ )

    Specifications are subject to change without notice.

  • Yama Seiki BL Series

    Specifications

    Model BL-2018S
    CAPACITY
    X-axis travel 2,000 mm ( 78.74″ )
    Y-axis travel 1,800 mm ( 70.86″ )
    Z-axis travel 1,300 mm ( 51.18″ )
    W-axis travel 600 mm ( 23.62″ )
    Distance nose to table 885 mm ( 34.84″ )
    WORKING TABLE
    Table size ( X x Y ) 1,600 x 1,800 mm
    ( 62.99″ x 70.86″ )
    Table load capacity 12,000 kg ( 26,400 lb )
    SPINDLE
    Spindle taper CAT50
    Spindle power ( cont. / 30 min. ) 22 / 26 kW ( 30 / 35 HP )
    Spindle speed 2,400 rpm
    Spindle motor torque 1,308 Nm ( 960 ft-lb )
    Boring spindle size Quill with Ø 120 mm ( 4.72″ )
    FEED RATE
    X-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Y-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Z-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    W-axis rapid feed rate 5,000 mm/min. ( 195 IPM )
    Cutting feed rate 1 ~ 5,000 mm/min. ( 1 ~ 195 IPM )
    TOOL MAGAZINE
    Tool magazine capacity 40T
    Max. tool diameter / adj. pocket empty Ø 125 / 250 mm
    ( Ø 4.92″ / 9.84″ )
    Max. tool length ( from gauge line ) 400 mm ( 15.74″ )
    Max. tool weight 25 kg ( 55 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 ) ± 0.01 mm / Full Travel
    ( ± 0.0004″ / Full Travel )
    Positioning accuracy ( VDI 3441 ) P= 0.016 mm / Full Travel
    ( P= 0.00065″ / Full Travel )
    Repeatability ( JIS B 6338 ) ± 0.003 mm
    ( ± 0.00012″ )
    Repeatability ( VDI 3441 ) Ps= 0.012 mm
    ( Ps=0.00047″ )
    GENARAL
    Pneumatic pressure requirement 5 ~ 8 ( 5 ) kg/cm2
    ( 70 ~ 110 ( 70 ) PSI )
    Lubrication oil tank capacity 4.6 liter
    ( 1.22 gal )
    Coolant tank capacity 400 liter ( 105.7 gal )
    Machine weight 30,000 kg ( 66,200 lb )
    Machine Height 4,460 mm ( 175.59″ )

    Specifications are subject to change without notice.

  • Yama Seiki BL Series

    Specifications

    Model BL-2024S
    CAPACITY
    X-axis travel 2,000 mm ( 78.74″ )
    Y-axis travel 2,400 mm ( 94.48″ )
    Z-axis travel 1,300 mm ( 51.18″ )
    W-axis travel 600 mm ( 23.62″ )
    Distance nose to table 885 mm ( 34.84″ )
    WORKING TABLE
    Table size ( X x Y ) 1,600 x 1,800 mm
    ( 62.99″ x 70.86″ )
    Table load capacity 12,000 kg ( 26,400 lb )
    SPINDLE
    Spindle taper CAT50
    Spindle power ( cont. / 30 min. ) 22 / 26 kW ( 30 / 35 HP )
    Spindle speed 2,400 rpm
    Spindle motor torque 1,308 Nm ( 960 ft-lb )
    Boring spindle size Quill with Ø 120 mm ( 4.72″ )
    FEED RATE
    X-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Y-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Z-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    W-axis rapid feed rate 5,000 mm/min. ( 195 IPM )
    Cutting feed rate 1 ~ 5,000 mm/min. ( 1 ~ 195 IPM )
    TOOL MAGAZINE
    Tool magazine capacity 40T
    Max. tool diameter / adj. pocket empty Ø 125 / 250 mm
    ( Ø 4.92″ / 9.84″ )
    Max. tool length ( from gauge line ) 400 mm ( 15.74″ )
    Max. tool weight 25 kg ( 55 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 ) ± 0.01 mm / Full Travel
    ( ± 0.0004″ / Full Travel )
    Positioning accuracy ( VDI 3441 ) P= 0.016 mm / Full Travel
    ( P= 0.00065″ / Full Travel )
    Repeatability ( JIS B 6338 ) ± 0.003 mm
    ( ± 0.00012″ )
    Repeatability ( VDI 3441 ) Ps= 0.012 mm
    ( Ps=0.00047″ )
    GENARAL
    Power requirement 70 kVA, 220±10%, 3 phase, 50/60 Hz
    Pneumatic pressure requirement 5 ~ 8 ( 5 ) kg/cm2
    ( 70 ~ 110 ( 70 ) PSI )
    Lubrication oil tank capacity 4.6 liter
    ( 1.22 gal )
    Coolant tank capacity 400 liter
    ( 105.7 gal )
    Machine weight 31,500 kg ( 69,500 lb )
    Machine Height 5,040 mm ( 198.42″ )

    Specifications are subject to change without notice.

  • Yama Seiki BL Series

    Specifications

    Model BL-3018S
    CAPACITY
    X-axis travel 3,000 mm ( 118.11″ )
    Y-axis travel 1,800 mm ( 70.86″ )
    Z-axis travel 1,300 mm ( 51.18″ )
    W-axis travel 600 mm ( 23.62″ )
    Distance nose to table 885 mm ( 34.84″ )
    WORKING TABLE
    Table size ( X x Y ) 1,600 x 1,800 mm
    ( 62.99″ x 70.86″ )
    Table load capacity 12,000 kg ( 26,400 lb )
    SPINDLE
    Spindle taper CAT50
    Spindle power ( cont. / 30 min. ) 22 / 26 kW ( 30 / 35 HP )
    Spindle speed 2,400 rpm
    Spindle motor torque 1,308 Nm ( 960 ft-lb )
    Boring spindle size Quill with Ø 120 mm ( 4.72″ )
    FEED RATE
    X-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Y-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Z-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    W-axis rapid feed rate 5,000 mm/min. ( 195 IPM )
    Cutting feed rate 1 ~ 5,000 mm/min. ( 1 ~ 195 IPM )
    TOOL MAGAZINE
    Tool magazine capacity 40T
    Max. tool diameter / adj. pocket empty Ø 125 / 250 mm
    ( Ø 4.92″ / 9.84″ )
    Max. tool length ( from gauge line ) 400 mm ( 15.74″ )
    Max. tool weight 25 kg ( 55 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 ) ± 0.01 mm / Full Travel
    ( ± 0.0004″ / Full Travel )
    Positioning accuracy ( VDI 3441 ) P= 0.020 mm / Full Travel
    ( P= 0.00079″ / Full Travel )
    Repeatability ( JIS B 6338 ) ± 0.003 mm
    ( ± 0.00012″ )
    Repeatability ( VDI 3441 ) Ps= 0.015 mm
    ( Ps=0.00059″ )
    GENARAL
    Pneumatic pressure requirement 5 ~ 8 ( 5 ) kg/cm2
    ( 70 ~ 110 ( 70 ) PSI )
    Lubrication oil tank capacity 4.6 liter
    ( 1.22 gal )
    Coolant tank capacity 480 liter
    ( 126.8 gal )
    Machine weight 34,000 kg ( 75,000 lb )
    Machine Height 4,460 mm ( 175.59″ )

    Specifications are subject to change without notice.

  • Yama Seiki BL Series

    Specifications

    Model BL-3024S
    CAPACITY
    X-axis travel 3,000 mm ( 118.11″ )
    Y-axis travel 2,400 mm ( 94.48″ )
    Z-axis travel 1,300 mm ( 51.18″ )
    W-axis travel 600 mm ( 23.62″ )
    Distance nose to table 885 mm ( 34.84″ )
    WORKING TABLE
    Table size ( X x Y ) 1,600 x 1,800 mm
    ( 62.99″ x 70.86″ )
    Table load capacity 12,000 kg ( 26,400 lb )
    SPINDLE
    Spindle taper CAT50
    Spindle power ( cont. / 30 min. ) 22 / 26 kW ( 30 / 35 HP )
    Spindle speed 2,400 rpm
    Spindle motor torque 1,308 Nm ( 960 ft-lb )
    Boring spindle size Quill with Ø 120 mm ( 4.72″ )
    FEED RATE
    X-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Y-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Z-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    W-axis rapid feed rate 5,000 mm/min. ( 195 IPM )
    Cutting feed rate 1 ~ 5,000 mm/min. ( 1 ~ 195 IPM )
    TOOL MAGAZINE
    Tool magazine capacity 40T
    Max. tool diameter / adj. pocket empty Ø 125 / 250 mm
    ( Ø 4.92″ / 9.84″ )
    Max. tool length ( from gauge line ) 400 mm ( 15.74″ )
    Max. tool weight 25 kg ( 55 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 ) ± 0.01 mm / Full Travel
    ( ± 0.0004″ / Full Travel )
    Positioning accuracy ( VDI 3441 ) P= 0.020 mm / Full Travel
    ( P= 0.00079″ / Full Travel )
    Repeatability ( JIS B 6338 ) ± 0.003 mm
    ( ± 0.00012″ )
    Repeatability ( VDI 3441 ) Ps= 0.015 mm
    ( Ps=0.00059″ )
    GENARAL
    Power requirement 70 kVA, 220±10%, 3 phase, 50/60 Hz
    Pneumatic pressure requirement 5 ~ 8 ( 5 ) kg/cm2
    ( 70 ~ 110 ( 70 ) PSI )
    Lubrication oil tank capacity 4.6 liter
    ( 1.22 gal )
    Coolant tank capacity 480 liter
    ( 126.8 gal )
    Machine weight 35,500 kg
    ( 78,300 lb )
    Machine Height 5,040 mm ( 198.42″ )

    Specifications are subject to change without notice.

  • Yama Seiki BL Series

    Specifications

    Model BL-3018S
    CAPACITY
    X-axis travel 4,000 mm ( 157.48″ )
    Y-axis travel 1,800 mm ( 70.86″ )
    Z-axis travel 1,300 mm ( 51.18″ )
    W-axis travel 600 mm ( 23.62″ )
    Distance nose to table 885 mm ( 34.84″ )
    WORKING TABLE
    Table size ( X x Y ) 1,600 x 1,800 mm
    ( 62.99″ x 70.86″ )
    Table load capacity 12,000 kg ( 26,400 lb )
    SPINDLE
    Spindle taper CAT50
    Spindle power ( cont. / 30 min. ) 22 / 26 kW ( 30 / 35 HP )
    Spindle speed 2,400 rpm
    Spindle motor torque 1,308 Nm ( 960 ft-lb )
    Boring spindle size Quill with Ø 120 mm ( 4.72″ )
    FEED RATE
    X-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Y-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Z-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    W-axis rapid feed rate 5,000 mm/min. ( 195 IPM )
    Cutting feed rate 1 ~ 5,000 mm/min. ( 1 ~ 195 IPM )
    TOOL MAGAZINE
    Tool magazine capacity 40T
    Max. tool diameter / adj. pocket empty Ø 125 / 250 mm
    ( Ø 4.92″ / 9.84″ )
    Max. tool length ( from gauge line ) 400 mm ( 15.74″ )
    Max. tool weight 25 kg ( 55 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 ) ± 0.01 mm / Full Travel
    ( ± 0.0004″ / Full Travel )
    Positioning accuracy ( VDI 3441 ) P= 0.025 mm / Full Travel
    ( P= 0.00098″ / Full Travel )
    Repeatability ( JIS B 6338 ) ± 0.003 mm
    ( ± 0.00012″ )
    Repeatability ( VDI 3441 ) Ps= 0.018 mm
    ( Ps=0.00071″ )
    GENARAL
    Pneumatic pressure requirement 5 ~ 8 ( 5 ) kg/cm2
    ( 70 ~ 110 ( 70 ) PSI )
    Lubrication oil tank capacity 4.6 liter
    ( 1.22 gal )
    Coolant tank capacity 560 liter
    ( 147.9 gal )
    Machine weight 38,000 kg ( 83,800 lb )
    Machine Height 4,460 mm ( 175.59″ )

    Specifications are subject to change without notice.

  • Yama Seiki BL Series

    Specifications

    Model BL-4024S
    CAPACITY
    X-axis travel 4,000 mm ( 157.48″ )
    Y-axis travel 2,400 mm ( 94.48″ )
    Z-axis travel 1,300 mm ( 51.18″ )
    W-axis travel 600 mm ( 23.62″ )
    Distance nose to table 885 mm ( 34.84″ )
    WORKING TABLE
    Table size ( X x Y ) 1,600 x 1,800 mm
    ( 62.99″ x 70.86″ )
    Table load capacity 12,000 kg ( 26,400 lb )
    SPINDLE
    Spindle taper CAT50
    Spindle power ( cont. / 30 min. ) 22 / 26 kW ( 30 / 35 HP )
    Spindle speed 2,400 rpm
    Spindle motor torque 1,308 Nm ( 960 ft-lb )
    Boring spindle size Quill with Ø 120 mm ( 4.72″ )
    FEED RATE
    X-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Y-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Z-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    W-axis rapid feed rate 5,000 mm/min. ( 195 IPM )
    Cutting feed rate 1 ~ 5,000 mm/min. ( 1 ~ 195 IPM )
    TOOL MAGAZINE
    Tool magazine capacity 40T
    Max. tool diameter / adj. pocket empty Ø 125 / 250 mm
    ( Ø 4.92″ / 9.84″ )
    Max. tool length ( from gauge line ) 400 mm ( 15.74″ )
    Max. tool weight 25 kg ( 55 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 ) ± 0.01 mm / Full Travel
    ( ± 0.0004″ / Full Travel )
    Positioning accuracy ( VDI 3441 ) P= 0.025 mm / Full Travel
    ( P= 0.00098″ / Full Travel )
    Repeatability ( JIS B 6338 ) ± 0.003 mm
    ( ± 0.00012″ )
    Repeatability ( VDI 3441 ) Ps= 0.018 mm
    ( Ps=0.00071″ )
    GENARAL
    Power requirement 70 kVA, 220±10%, 3 phase, 50/60 Hz
    Pneumatic pressure requirement 5 ~ 8 ( 5 ) kg/cm2
    ( 70 ~ 110 ( 70 ) PSI )
    Lubrication oil tank capacity 4.6 liter
    ( 1.22 gal )
    Coolant tank capacity 560 liter
    ( 147.9 gal )
    Machine weight 39,500 kg
    ( 87,100 lb )
    Machine Height 5,040 mm ( 198.42″ )

    Specifications are subject to change without notice.

  • Yama Seiki BL Series

    Specifications

    Model BL-2024FM
    CAPACITY
    X-axis travel 2,000 mm ( 78.74″ )
    Y-axis travel 2,400 mm ( 94.48″ )
    Z-axis travel 1,300 mm ( 51.18″ )
    W-axis travel 600 mm ( 23.62″ )
    Distance nose to table 885 mm ( 34.84″ )
    WORKING TABLE
    Table size ( X x Y ) 1,600 x 1,800 mm
    ( 62.99″ x 70.86″ )
    Table load capacity 12,000 kg ( 26,400 lb )
    SPINDLE
    Spindle taper CAT50
    Spindle power ( cont. / 30 min. ) 22 / 26 kW ( 30 / 35 HP )
    Spindle speed 6,000 rpm
    Spindle motor torque 6008 Nm ( 4,430 ft-lb )
    Boring spindle size Ram 480 x 470 mm section ( 18.89″ x 18.49″ )
    FEED RATE
    X-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Y-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Z-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    W-axis rapid feed rate 5,000 mm/min. ( 195 IPM )
    Cutting feed rate 1 ~ 5,000 mm/min. ( 1 ~ 195 IPM )
    TOOL MAGAZINE
    Tool magazine capacity 40T
    Max. tool diameter / adj. pocket empty Ø 125 / 250 mm
    ( Ø 4.92″ / 9.84″ )
    Max. tool length ( from gauge line ) 400 mm ( 15.74″ )
    Max. tool weight 25 kg ( 55 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 ) ± 0.01 mm / Full Travel
    ( ± 0.0004″ / Full Travel )
    Positioning accuracy ( VDI 3441 ) P= 0.016 mm / Full Travel
    ( P= 0.00065″ / Full Travel )
    Repeatability ( JIS B 6338 ) ± 0.003 mm
    ( ± 0.00012″ )
    Repeatability ( VDI 3441 ) Ps= 0.012 mm
    ( Ps=0.00047″ )
    GENARAL
    Power requirement 70 kVA, 220/380~415±10%, 3 phase, 50/60 Hz
    Pneumatic pressure requirement 5 ~ 8 ( 5 ) kg/cm2
    ( 70 ~ 110 ( 70 ) PSI )
    Lubrication oil tank capacity 4.6 liter
    ( 1.22 gal )
    Coolant tank capacity 400 liter
    ( 105.7 gal )
    Machine weight 32,500 kg
    ( 71,650 lb )
    Machine Height 5,040 mm ( 198.42″ )

    Specifications are subject to change without notice.

  • Yama Seiki BL Series

    Specifications

    Model BL-3018FM
    CAPACITY
    X-axis travel 3,000 mm ( 118.11″ )
    Y-axis travel 1,800 mm ( 70.86″ )
    Z-axis travel 1,300 mm ( 51.18″ )
    W-axis travel 600 mm ( 23.62″ )
    Distance nose to table 885 mm ( 34.84″ )
    WORKING TABLE
    Table size ( X x Y ) 1,600 x 1,800 mm
    ( 62.99″ x 70.86″ )
    Table load capacity 12,000 kg ( 26,400 lb )
    SPINDLE
    Spindle taper CAT50
    Spindle power ( cont. / 30 min. ) 22 / 26 kW ( 30 / 35 HP )
    Spindle speed 6,000 rpm
    Spindle motor torque 600 Nm
    Boring spindle size Ram 480 x 470 mm section ( 18.89″ x 18.49″ )
    FEED RATE
    X-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Y-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Z-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    W-axis rapid feed rate 5,000 mm/min. ( 195 IPM )
    Cutting feed rate 1 ~ 5,000 mm/min. ( 1 ~ 195 IPM )
    TOOL MAGAZINE
    Tool magazine capacity 40T
    Max. tool diameter / adj. pocket empty Ø 125 / 250 mm
    ( Ø 4.92″ / 9.84″ )
    Max. tool length ( from gauge line ) 400 mm ( 15.74″ )
    Max. tool weight 25 kg ( 55 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 ) ± 0.01 mm / Full Travel
    ( ± 0.0004″ / Full Travel )
    Positioning accuracy ( VDI 3441 ) P= 0.020 mm / Full Travel
    ( P= 0.00079″ / Full Travel )
    Repeatability ( JIS B 6338 ) ± 0.003 mm
    ( ± 0.00012″ )
    Repeatability ( VDI 3441 ) Ps= 0.015 mm
    ( Ps=0.00059″ )
    GENARAL
    Power requirement 70 kVA, 220±10%, 3 phase, 50/60 Hz
    Pneumatic pressure requirement 5 ~ 8 ( 5 ) kg/cm2
    ( 70 ~ 110 ( 70 ) PSI )
    Lubrication oil tank capacity 4.6 liter
    ( 1.22 gal )
    Coolant tank capacity 480 liter
    ( 126.8 gal )
    Machine weight 35,000 kg
    ( 77,200 lb )
    Machine Height 4,460 mm ( 175.59″ )

    Specifications are subject to change without notice.

  • Yama Seiki BL Series

    Specifications

    Model BL-3024FM
    CAPACITY
    X-axis travel 3,000 mm ( 118.11″ )
    Y-axis travel 2,400 mm ( 94.48″ )
    Z-axis travel 1,300 mm ( 51.18″ )
    W-axis travel 600 mm ( 23.62″ )
    Distance nose to table 885 mm ( 34.84″ )
    WORKING TABLE
    Table size ( X x Y ) 1,600 x 1,800 mm
    ( 62.99″ x 70.86″ )
    Table load capacity 12,000 kg ( 26,400 lb )
    SPINDLE
    Spindle taper CAT50
    Spindle power ( cont. / 30 min. ) 22 / 26 kW ( 30 / 35 HP )
    Spindle speed 6,000 rpm
    Spindle motor torque 6008 Nm ( 4,430 ft-lb )
    Boring spindle size Ram 480 x 470 mm section ( 18.89″ x 18.49″ )
    FEED RATE
    X-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Y-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Z-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    W-axis rapid feed rate 5,000 mm/min. ( 195 IPM )
    Cutting feed rate 1 ~ 5,000 mm/min. ( 1 ~ 195 IPM )
    TOOL MAGAZINE
    Tool magazine capacity 40T
    Max. tool diameter / adj. pocket empty Ø 125 / 250 mm
    ( Ø 4.92″ / 9.84″ )
    Max. tool length ( from gauge line ) 400 mm ( 15.74″ )
    Max. tool weight 25 kg ( 55 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 ) ± 0.01 mm / Full Travel
    ( ± 0.0004″ / Full Travel )
    Positioning accuracy ( VDI 3441 ) P= 0.020 mm / Full Travel
    ( P= 0.00079″ / Full Travel )
    Repeatability ( JIS B 6338 ) ± 0.003 mm
    ( ± 0.00012″ )
    Repeatability ( VDI 3441 ) Ps= 0.015 mm
    ( Ps=0.00059″ )
    GENARAL
    Power requirement 70 kVA, 220/380~415±10%, 3 phase, 50/60 Hz
    Pneumatic pressure requirement 5 ~ 8 ( 5 ) kg/cm2
    ( 70 ~ 110 ( 70 ) PSI )
    Lubrication oil tank capacity 4.6 liter
    ( 1.22 gal )
    Coolant tank capacity 480 liter
    ( 126.8 gal )
    Machine weight 36,500 kg
    ( 80,500 lb )
    Machine Height 5,040 mm ( 198.42″ )

    Specifications are subject to change without notice.

  • Yama Seiki BL Series

    Specifications

    Model BL-4018FM
    CAPACITY
    X-axis travel 4,000 mm ( 157.48″ )
    Y-axis travel 1,800 mm ( 70.86″ )
    Z-axis travel 1,300 mm ( 51.18″ )
    W-axis travel 600 mm ( 23.62″ )
    Distance nose to table 885 mm ( 34.84″ )
    WORKING TABLE
    Table size ( X x Y ) 1,600 x 1,800 mm
    ( 62.99″ x 70.86″ )
    Table load capacity 12,000 kg ( 26,400 lb )
    SPINDLE
    Spindle taper CAT50
    Spindle power ( cont. / 30 min. ) 22 / 26 kW ( 30 / 35 HP )
    Spindle speed 6,000 rpm
    Spindle motor torque 600 Nm
    Boring spindle size Ram 480 x 470 mm section ( 18.89″ x 18.49″ )
    FEED RATE
    X-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Y-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Z-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    W-axis rapid feed rate 5,000 mm/min. ( 195 IPM )
    Cutting feed rate 1 ~ 5,000 mm/min. ( 1 ~ 195 IPM )
    TOOL MAGAZINE
    Tool magazine capacity 40T
    Max. tool diameter / adj. pocket empty Ø 125 / 250 mm
    ( Ø 4.92″ / 9.84″ )
    Max. tool length ( from gauge line ) 400 mm ( 15.74″ )
    Max. tool weight 25 kg ( 55 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 ) ± 0.01 mm / Full Travel
    ( ± 0.0004″ / Full Travel )
    Positioning accuracy ( VDI 3441 ) P= 0.025 mm / Full Travel
    ( P= 0.00098″ / Full Travel )
    Repeatability ( JIS B 6338 ) ± 0.003 mm
    ( ± 0.00012″ )
    Repeatability ( VDI 3441 ) Ps= 0.018 mm
    ( Ps=0.00071″ )
    GENARAL
    Power requirement 70 kVA, 220±10%, 3 phase, 50/60 Hz
    Pneumatic pressure requirement 5 ~ 8 ( 5 ) kg/cm2
    ( 70 ~ 110 ( 70 ) PSI )
    Lubrication oil tank capacity 4.6 liter
    ( 1.22 gal )
    Coolant tank capacity 560 liter
    ( 147.9 gal )
    Machine weight 39,000 kg
    ( 86,000 lb )
    Machine Height 4,460 mm ( 175.59″ )

    Specifications are subject to change without notice.

  • Yama Seiki BL Series

    Specifications

    Model BL-4024FM
    CAPACITY
    X-axis travel 4,000 mm ( 157.48″ )
    Y-axis travel 2,400 mm ( 94.48″ )
    Z-axis travel 1,300 mm ( 51.18″ )
    W-axis travel 600 mm ( 23.62″ )
    Distance nose to table 885 mm ( 34.84″ )
    WORKING TABLE
    Table size ( X x Y ) 1,600 x 1,800 mm
    ( 62.99″ x 70.86″ )
    Table load capacity 12,000 kg ( 26,400 lb )
    SPINDLE
    Spindle taper CAT50
    Spindle power ( cont. / 30 min. ) 22 / 26 kW ( 30 / 35 HP )
    Spindle speed 6,000 rpm
    Spindle motor torque 6008 Nm ( 4,430 ft-lb )
    Boring spindle size Ram 480 x 470 mm section ( 18.89″ x 18.49″ )
    FEED RATE
    X-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Y-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    Z-axis rapid feed rate 12,000 mm/min. ( 470 IPM )
    W-axis rapid feed rate 5,000 mm/min. ( 195 IPM )
    Cutting feed rate 1 ~ 5,000 mm/min. ( 1 ~ 195 IPM )
    TOOL MAGAZINE
    Tool magazine capacity 40T
    Max. tool diameter / adj. pocket empty Ø 125 / 250 mm
    ( Ø 4.92″ / 9.84″ )
    Max. tool length ( from gauge line ) 400 mm ( 15.74″ )
    Max. tool weight 25 kg ( 55 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 ) ± 0.01 mm / Full Travel
    ( ± 0.0004″ / Full Travel )
    Positioning accuracy ( VDI 3441 ) P= 0.025 mm / Full Travel
    ( P= 0.00098″ / Full Travel )
    Repeatability ( JIS B 6338 ) ± 0.003 mm
    ( ± 0.00012″ )
    Repeatability ( VDI 3441 ) Ps= 0.018 mm
    ( Ps=0.00071″ )
    GENARAL
    Power requirement 70 kVA, 220/380~415±10%, 3 phase, 50/60 Hz
    Pneumatic pressure requirement 5 ~ 8 ( 5 ) kg/cm2
    ( 70 ~ 110 ( 70 ) PSI )
    Lubrication oil tank capacity 4.6 liter
    ( 1.22 gal )
    Coolant tank capacity 560 liter
    ( 147.9 gal )
    Machine weight 40,500 kg
    ( 89,300 lb )
    Machine Height 5,040 mm ( 198.42″ )

    Specifications are subject to change without notice.

SHOP BY MACHINE TYPE