• Yama Seiki VP-HD series

    Specifications

    ModelHD-2012
    CAPACITY
    X-axis travel2,000 ( 78.74″ )
    Y-axis travel1,200 mm ( 47.2″ )
    Z-axis travel760 ( 29.92″ )
    Dist. form spindle nose to table top200 ~ 960 mm ( 7.87″ ~ 37.7″ )
    Dist. between columns1,300 mm ( 51.1″ )
    WORKING TABLE
    Table size ( X direction )2,000 ( 78.74″ )
    Table size ( Y direction )1,100 mm ( 43.3″ )
    Table load capacity4,500 ( 9,920 )
    SPINDLE
    Spindle taperCAT50
    Spindle power ( cont. / 30 min. )22 / 26 ( 30 / 35 ) kW ( HP )
    Spindle speed6,000 rpm
    FEED RATE
    X-axis rapid feed rate24,000 mm/min. ( 945 IPM )
    Y-axis rapid feed rate24,000 mm/min. ( 945 IPM )
    Z-axis rapid feed rate15,000 mm/min. ( 590 IPM )
    Cutting feed rate10,000 mm/min. ( 394 IPM )
    TOOL MAGAZINE
    Tool magazine capacity32 ( Opt. 40 )
    Max. tool diameter / adj. pocket emptyØ 125 mm / 229 mm ( Ø 4.92″ / 9.01″ )
    Max. tool length ( from gauge line )400 ( 15.74″ )
    Max. tool weight15 kg ( 33 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 )± 0.015 ( 0.0006″ ) / Full travel
    Positioning accuracy ( VDI 3441 )P ≤ 0.02 ( 0.0008″ ) / Full travel
    Repeatability ( JIS B 6338 )± 0.003 ( 0.00012″ )
    Repeatability ( VDI 3441 )Ps ≤ 0.015 ( 0.0006″ ) / Full travel
    GENERAL
    Power requirementAC 220 ± 10% 3 Phase , 60 / 50 Hz / 50 kVA
    Pneumatic pressure requirement ( min. )5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
    Lubrication oil tank capacity4.5 L
    Hydraulic unit tank capacity ( pump )48 liter, [ 3 HP ]
    Coolant tank capacity ( pump )400 L ( 1 HP )
    Machine weight18,500 kg ( 40,800 lb )

    Specifications are subject to change without notice.

  • Yama Seiki VP-HD series

    Specifications

    ModelHD-3012
    CAPACITY
    X-axis travel3,000 ( 118.11″ )
    Y-axis travel1,200 mm ( 47.2″ )
    Z-axis travel760 ( 29.92″ )
    Dist. form spindle nose to table top200 ~ 960 mm ( 7.87″ ~ 37.7″ )
    Dist. between columns1,300 mm ( 51.1″ )
    WORKING TABLE
    Table size ( X direction )3,000 ( 118.11″ )
    Table size ( Y direction )1,100 mm ( 43.3″ )
    Table load capacity5,500 ( 12,120 )
    SPINDLE
    Spindle taperCAT50
    Spindle power ( cont. / 30 min. )22 / 26 ( 30 / 35 ) kW ( HP )
    Spindle speed6,000 rpm
    FEED RATE
    X-axis rapid feed rate20,000 mm/min. ( 788  IPM )
    Y-axis rapid feed rate24,000 mm/min. ( 945 IPM )
    Z-axis rapid feed rate15,000 mm/min. ( 590 IPM )
    Cutting feed rate10,000 mm/min. ( 394 IPM )
    TOOL MAGAZINE
    Tool magazine capacity32 ( Opt. 40 )
    Max. tool diameter / adj. pocket emptyØ 125 mm / 229 mm ( Ø 4.92″ / 9.01″ )
    Max. tool length ( from gauge line )400 ( 15.74″ )
    Max. tool weight15 kg ( 33 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 )± 0.015 ( 0.0006″ ) / Full travel
    Positioning accuracy ( VDI 3441 )P ≤ 0.025 ( 0.001″ ) / Full travel
    Repeatability ( JIS B 6338 )± 0.003 ( 0.00012″ )
    Repeatability ( VDI 3441 )Ps ≤ 0.02 ( 0.0008″ ) / Full travel
    GENERAL
    Power requirementAC 220 ± 10% 3 Phase , 60 / 50 Hz / 50 kVA
    Pneumatic pressure requirement ( min. )5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
    Lubrication oil tank capacity4.5 L
    Hydraulic unit tank capacity ( pump )48 liter, [ 3 HP ]
    Coolant tank capacity ( pump )400 L ( 1 HP )
    Machine weight22,500 ( 49,600 lb )

    Specifications are subject to change without notice.

  • Yama Seiki HTP

    Specifications

    ModelHTP-4025
    CAPACITY
    X-axis travel4,000 mm ( 157.4″ )
    Y-axis travel2,500 mm ( Opt. 3,200 )
    [ 98.4″ ( Opt. 125.9″ ) ]
    Z-axis travel1,000 mm ( Opt. 1,200 / 1,400 )
    [ 39.3″ ( Opt. 47.2″ / 55.1″ ) ]
    Dist. form spindle nose to table top200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 )
    [ 7.8″ ~ 47.2″ ( Opt. 7.8″ ~ 55.1″ / 7.8″ ~ 62.9″ )]
    Dist. between columns2,700 mm ( 106.2″ )
    WORKING TABLE
    Table size ( X direction )4,020  mm ( 158.2″ )
    Table size ( Y direction )2,400 mm ( 94.4″ )
    Table load capacity15,000 kg ( 33.070 lb )
    SPINDLE
    Spindle taperBBT50 ( ISO 50 )
    Spindle power ( cont. / 30 min. )22 / 26 ( Opt. 30 / 37 ) kW
    [ 30 / 35 HP ( Opt. 40 / 50 ) ]
    Spindle speedGear Spindle 4,000 rpm
    FEED RATE
    X-axis rapid feed rate15 m/min. ( 590 IPM )
    Y-axis rapid feed rate12 m/min. ( 472 IPM )
    Z-axis rapid feed rate12 m/min. ( 472 IPM )
    Cutting feed rate1 ~ 10 m/min. ( 1 ~ 393 IPM )
    TOOL MAGAZINE
    Tool magazine capacity32 T ( Opt. 40 / 60 / 90 / 120 )
    Max. tool diameter / adj. pocket emptyØ 127 / Ø 215 mm ( Ø 5″ / Ø 8.4″ )
    Max. tool length ( from gauge line )350 mm ( Opt. 400 ) [ 13.7″ ( Opt. 15.7″ ) ]
    Max. tool weight20 kg ( 44 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 )± 0.015 mm ( 0.00059″ ) / Full Travel
    Positioning accuracy ( VDI 3441 )P ≤ 0.030 mm ( 0.0011″ ) / Full Travel
    Repeatability ( JIS B 6338 )± 0.003 mm ( ± 0.000118″ )
    Repeatability ( VDI 3441 )Ps ≤ 0.025 mm ( 0.00098″ )
    GENERAL
    Power requirement220 V ± 10 %
    Pneumatic pressure requirement ( min. )5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
    Lubrication oil tank capacity6 liter ( 1.6 gal )
    Hydraulic unit tank capacity100 liter ( 26.4 gal )
    Coolant tank capacity1,000 liter ( 264 gal )
    Machine weight41,000 kg ( 90,390 lb )

    Specifications are subject to change without notice.

  • Yama Seiki HTP

    Specifications

    ModelHTP-4025Y
    CAPACITY
    X-axis travel4,000 mm ( 157.4″ )
    Y-axis travel3,200 mm (125.9″)
    Z-axis travel1,000 mm [ 39.3″]
    Dist. form spindle nose to table top200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 )
    [ 7.8″ ~ 47.2″ ( Opt. 7.8″ ~ 55.1″ / 7.8″ ~ 62.9″ )]
    Dist. between columns2,700 mm ( 106.2″ )
    WORKING TABLE
    Table size ( X direction )4,020  mm ( 158.2″ )
    Table size ( Y direction )2,400 mm ( 94.4″ )
    Table load capacity15,000 kg ( 33.070 lb )
    SPINDLE
    Spindle taperBBT50 ( ISO 50 )
    Spindle power ( cont. / 30 min. )22 / 26 ( Opt. 30 / 37 ) kW
    [ 30 / 35 HP ( Opt. 40 / 50 ) ]
    Spindle speedGear Spindle 4,000 rpm
    FEED RATE
    X-axis rapid feed rate15 m/min. ( 590 IPM )
    Y-axis rapid feed rate12 m/min. ( 472 IPM )
    Z-axis rapid feed rate12 m/min. ( 472 IPM )
    Cutting feed rate1 ~ 10 m/min. ( 1 ~ 393 IPM )
    TOOL MAGAZINE
    Tool magazine capacity32 T ( Opt. 40 / 60 / 90 / 120 )
    Max. tool diameter / adj. pocket emptyØ 127 / Ø 215 mm ( Ø 5″ / Ø 8.4″ )
    Max. tool length ( from gauge line )350 mm ( Opt. 400 ) [ 13.7″ ( Opt. 15.7″ ) ]
    Max. tool weight20 kg ( 44 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 )± 0.015 mm ( 0.00059″ ) / Full Travel
    Positioning accuracy ( VDI 3441 )P ≤ 0.030 mm ( 0.0011″ ) / Full Travel
    Repeatability ( JIS B 6338 )± 0.003 mm ( ± 0.000118″ )
    Repeatability ( VDI 3441 )Ps ≤ 0.025 mm ( 0.00098″ )
    GENERAL
    Power requirement220 V ± 10 %
    Pneumatic pressure requirement ( min. )5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
    Lubrication oil tank capacity6 liter ( 1.6 gal )
    Hydraulic unit tank capacity100 liter ( 26.4 gal )
    Coolant tank capacity1,000 liter ( 264 gal )
    Machine weight41,000 kg ( 90,390 lb )

    Specifications are subject to change without notice.

  • Yama Seiki HTP

    Specifications

    ModelHTP-4025YZ
    CAPACITY
    X-axis travel4,000 mm ( 157.4″ )
    Y-axis travel3,200 mm (125.9″ )
    Z-axis travel( 1,200 mm / 47.2″ ) ( 1,400  mm/ 55.1″ )
    Dist. form spindle nose to table top200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 )
    [ 7.8″ ~ 47.2″ ( Opt. 7.8″ ~ 55.1″ / 7.8″ ~ 62.9″ )]
    Dist. between columns2,700 mm ( 106.2″ )
    WORKING TABLE
    Table size ( X direction )4,020  mm ( 158.2″ )
    Table size ( Y direction )2,400 mm ( 94.4″ )
    Table load capacity15,000 kg ( 33.070 lb )
    SPINDLE
    Spindle taperBBT50 ( ISO 50 )
    Spindle power ( cont. / 30 min. )22 / 26 ( Opt. 30 / 37 ) kW
    [ 30 / 35 HP ( Opt. 40 / 50 ) ]
    Spindle speedGear Spindle 4,000 rpm
    FEED RATE
    X-axis rapid feed rate15 m/min. ( 590 IPM )
    Y-axis rapid feed rate12 m/min. ( 472 IPM )
    Z-axis rapid feed rate12 m/min. ( 472 IPM )
    Cutting feed rate1 ~ 10 m/min. ( 1 ~ 393 IPM )
    TOOL MAGAZINE
    Tool magazine capacity32 T ( Opt. 40 / 60 / 90 / 120 )
    Max. tool diameter / adj. pocket emptyØ 127 / Ø 215 mm ( Ø 5″ / Ø 8.4″ )
    Max. tool length ( from gauge line )350 mm ( Opt. 400 ) [ 13.7″ ( Opt. 15.7″ ) ]
    Max. tool weight20 kg ( 44 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 )± 0.015 mm ( 0.00059″ ) / Full Travel
    Positioning accuracy ( VDI 3441 )P ≤ 0.030 mm ( 0.0011″ ) / Full Travel
    Repeatability ( JIS B 6338 )± 0.003 mm ( ± 0.000118″ )
    Repeatability ( VDI 3441 )Ps ≤ 0.025 mm ( 0.00098″ )
    GENERAL
    Power requirement220 V ± 10 %
    Pneumatic pressure requirement ( min. )5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
    Lubrication oil tank capacity6 liter ( 1.6 gal )
    Hydraulic unit tank capacity100 liter ( 26.4 gal )
    Coolant tank capacity1,000 liter ( 264 gal )
    Machine weight41,000 kg ( 90,390 lb )

    Specifications are subject to change without notice.

  • Yama Seiki HTP

    Specifications

    ModelHTP-4025Z
    CAPACITY
    X-axis travel4,000 mm ( 157.4″ )
    Y-axis travel2,500 mm [ 98.4″  ]
    Z-axis travel 1,200 mm (47.2″)
    Dist. form spindle nose to table top200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 )
    [ 7.8″ ~ 47.2″ ( Opt. 7.8″ ~ 55.1″ / 7.8″ ~ 62.9″ )]
    Dist. between columns2,700 mm ( 106.2″ )
    WORKING TABLE
    Table size ( X direction )4,020  mm ( 158.2″ )
    Table size ( Y direction )2,400 mm ( 94.4″ )
    Table load capacity15,000 kg ( 33.070 lb )
    SPINDLE
    Spindle taperBBT50 ( ISO 50 )
    Spindle power ( cont. / 30 min. )22 / 26 ( Opt. 30 / 37 ) kW
    [ 30 / 35 HP ( Opt. 40 / 50 ) ]
    Spindle speedGear Spindle 4,000 rpm
    FEED RATE
    X-axis rapid feed rate15 m/min. ( 590 IPM )
    Y-axis rapid feed rate12 m/min. ( 472 IPM )
    Z-axis rapid feed rate12 m/min. ( 472 IPM )
    Cutting feed rate1 ~ 10 m/min. ( 1 ~ 393 IPM )
    TOOL MAGAZINE
    Tool magazine capacity32 T ( Opt. 40 / 60 / 90 / 120 )
    Max. tool diameter / adj. pocket emptyØ 127 / Ø 215 mm ( Ø 5″ / Ø 8.4″ )
    Max. tool length ( from gauge line )350 mm ( Opt. 400 ) [ 13.7″ ( Opt. 15.7″ ) ]
    Max. tool weight20 kg ( 44 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 )± 0.015 mm ( 0.00059″ ) / Full Travel
    Positioning accuracy ( VDI 3441 )P ≤ 0.030 mm ( 0.0011″ ) / Full Travel
    Repeatability ( JIS B 6338 )± 0.003 mm ( ± 0.000118″ )
    Repeatability ( VDI 3441 )Ps ≤ 0.025 mm ( 0.00098″ )
    GENERAL
    Power requirement220 V ± 10 %
    Pneumatic pressure requirement ( min. )5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
    Lubrication oil tank capacity6 liter ( 1.6 gal )
    Hydraulic unit tank capacity100 liter ( 26.4 gal )
    Coolant tank capacity1,000 liter ( 264 gal )
    Machine weight41,000 kg ( 90,390 lb )

    Specifications are subject to change without notice.

  • Yama Seiki HTP

    Specifications

    ModelHTP-4033
    CAPACITY
    X-axis travel4,000 mm ( 157.4″ )
    Y-axis travel3,300 mm ( Opt. 4,000 )
    [ 129.9″ ( Opt. 157.4″ ) ]
    Z-axis travel1,000 mm ( Opt. 1,200 / 1,400 )
    [ 39.3″ ( Opt. 47.2″ / 55.1″ ) ]
    Dist. form spindle nose to table top200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 )
    [ 7.8″ ~ 47.2″ ( Opt. 7.8″ ~ 55.1″ / 7.8″ ~ 62.9″ )]
    Dist. between columns3,500 mm ( 137.7″ )
    WORKING TABLE
    Table size ( X direction )4,020 mm ( 158.2″)
    Table size ( Y direction )3,000 mm ( 118.1″ )
    Table load capacity15,000 kg ( 33.070 lb )
    SPINDLE
    Spindle taperBBT50 ( ISO 50 )
    Spindle power ( cont. / 30 min. )22 / 26 ( Opt. 30 / 37 ) kW
    [ 30 / 35 HP ( Opt. 40 / 50 ) ]
    Spindle speedGear Spindle 4,000 rpm
    FEED RATE
    X-axis rapid feed rate15 m/min. ( 590 IPM )
    Y-axis rapid feed rate12 m/min. ( 472 IPM )
    Z-axis rapid feed rate12 m/min. ( 472 IPM )
    Cutting feed rate1 ~ 10 m/min. ( 1 ~ 393 IPM )
    TOOL MAGAZINE
    Tool magazine capacity32 T ( Opt. 40 / 60 / 90 / 120 )
    Max. tool diameter / adj. pocket empty350 mm ( Opt. 400 ) [ 13.7″ ( Opt. 15.7″ ) ]
    Max. tool length ( from gauge line )Ø 127 / Ø 215 mm ( Ø 5″ / Ø 8.4″ )
    Max. tool weight20 kg ( 44 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 )± 0.015 mm ( 0.00059″ ) / Full Travel
    Positioning accuracy ( VDI 3441 )P ≤ 0.030 mm ( 0.0011″ ) /Full Travel
    Repeatability ( JIS B 6338 )± 0.003 mm ( ± 0.000118″ )
    Repeatability ( VDI 3441 )Ps ≤ 0.025 mm ( 0.00098″ )
    GENERAL
    Power requirement220 V ± 10 %
    Pneumatic pressure requirement ( min. )5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
    Lubrication oil tank capacity6 liter ( 1.6 gal )
    Hydraulic unit tank capacity100 liter ( 26.4 gal )
    Coolant tank capacity1,000 liter ( 264 gal )
    Machine weight43,000 kg ( 94,800 lb )

    Specifications are subject to change without notice.

  • Yama Seiki HTP

    Specifications

    ModelHTP-4033Y
    CAPACITY
    X-axis travel4,000 mm ( 157.4″ )
    Y-axis travel4,000 mm ( 157.4″ )
    Z-axis travel1,000 mm ( 39.3″ )
    Dist. form spindle nose to table top200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 )
    [ 7.8″ ~ 47.2″ ( Opt. 7.8″ ~ 55.1″ / 7.8″ ~ 62.9″ )]
    Dist. between columns3,500 mm ( 137.7″ )
    WORKING TABLE
    Table size ( X direction )4,020 mm ( 158.2″)
    Table size ( Y direction )3,000 mm ( 118.1″ )
    Table load capacity15,000 kg ( 33.070 lb )
    SPINDLE
    Spindle taperBBT50 ( ISO 50 )
    Spindle power ( cont. / 30 min. )22 / 26 ( Opt. 30 / 37 ) kW
    [ 30 / 35 HP ( Opt. 40 / 50 ) ]
    Spindle speedGear Spindle 4,000 rpm
    FEED RATE
    X-axis rapid feed rate15 m/min. ( 590 IPM )
    Y-axis rapid feed rate12 m/min. ( 472 IPM )
    Z-axis rapid feed rate12 m/min. ( 472 IPM )
    Cutting feed rate1 ~ 10 m/min. ( 1 ~ 393 IPM )
    TOOL MAGAZINE
    Tool magazine capacity32 T ( Opt. 40 / 60 / 90 / 120 )
    Max. tool diameter / adj. pocket empty350 mm ( Opt. 400 ) [ 13.7″ ( Opt. 15.7″ ) ]
    Max. tool length ( from gauge line )Ø 127 / Ø 215 mm ( Ø 5″ / Ø 8.4″ )
    Max. tool weight20 kg ( 44 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 )± 0.015 mm ( 0.00059″ ) / Full Travel
    Positioning accuracy ( VDI 3441 )P ≤ 0.030 mm ( 0.0011″ ) /Full Travel
    Repeatability ( JIS B 6338 )± 0.003 mm ( ± 0.000118″ )
    Repeatability ( VDI 3441 )Ps ≤ 0.025 mm ( 0.00098″ )
    GENERAL
    Power requirement220 V ± 10 %
    Pneumatic pressure requirement ( min. )5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
    Lubrication oil tank capacity6 liter ( 1.6 gal )
    Hydraulic unit tank capacity100 liter ( 26.4 gal )
    Coolant tank capacity1,000 liter ( 264 gal )
    Machine weight43,000 kg ( 94,800 lb )

    Specifications are subject to change without notice.

  • Yama Seiki HTP

    Specifications

    ModelHTP-4033YZ
    CAPACITY
    X-axis travel4,000 mm ( 157.4″ )
    Y-axis travel 4,000 mm ( 157.4″ )
    Z-axis travel1,200 mm  ( 55.1″ ) | Opt. 1,400 mm  (47.2″ )
    Dist. form spindle nose to table top200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 )
    [ 7.8″ ~ 47.2″ ( Opt. 7.8″ ~ 55.1″ / 7.8″ ~ 62.9″ )]
    Dist. between columns3,500 mm ( 137.7″ )
    WORKING TABLE
    Table size ( X direction )4,020 mm ( 158.2″)
    Table size ( Y direction )3,000 mm ( 118.1″ )
    Table load capacity15,000 kg ( 33.070 lb )
    SPINDLE
    Spindle taperBBT50 ( ISO 50 )
    Spindle power ( cont. / 30 min. )22 / 26 ( Opt. 30 / 37 ) kW
    [ 30 / 35 HP ( Opt. 40 / 50 ) ]
    Spindle speedGear Spindle 4,000 rpm
    FEED RATE
    X-axis rapid feed rate15 m/min. ( 590 IPM )
    Y-axis rapid feed rate12 m/min. ( 472 IPM )
    Z-axis rapid feed rate12 m/min. ( 472 IPM )
    Cutting feed rate1 ~ 10 m/min. ( 1 ~ 393 IPM )
    TOOL MAGAZINE
    Tool magazine capacity32 T ( Opt. 40 / 60 / 90 / 120 )
    Max. tool diameter / adj. pocket empty350 mm ( Opt. 400 ) [ 13.7″ ( Opt. 15.7″ ) ]
    Max. tool length ( from gauge line )Ø 127 / Ø 215 mm ( Ø 5″ / Ø 8.4″ )
    Max. tool weight20 kg ( 44 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 )± 0.015 mm ( 0.00059″ ) / Full Travel
    Positioning accuracy ( VDI 3441 )P ≤ 0.030 mm ( 0.0011″ ) /Full Travel
    Repeatability ( JIS B 6338 )± 0.003 mm ( ± 0.000118″ )
    Repeatability ( VDI 3441 )Ps ≤ 0.025 mm ( 0.00098″ )
    GENERAL
    Power requirement220 V ± 10 %
    Pneumatic pressure requirement ( min. )5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
    Lubrication oil tank capacity6 liter ( 1.6 gal )
    Hydraulic unit tank capacity100 liter ( 26.4 gal )
    Coolant tank capacity1,000 liter ( 264 gal )
    Machine weight43,000 kg ( 94,800 lb )

    Specifications are subject to change without notice.

  • Yama Seiki HTP

    Specifications

    ModelHTP-4033Z
    CAPACITY
    X-axis travel4,000 mm ( 157.4″ )
    Y-axis travel3,300 mm ( 129.9″ )
    Z-axis travel1,200 mm  ( 47.2″ )
    Dist. form spindle nose to table top200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 )
    [ 7.8″ ~ 47.2″ ( Opt. 7.8″ ~ 55.1″ / 7.8″ ~ 62.9″ )]
    Dist. between columns3,500 mm ( 137.7″ )
    WORKING TABLE
    Table size ( X direction )4,020 mm ( 158.2″)
    Table size ( Y direction )3,000 mm ( 118.1″ )
    Table load capacity15,000 kg ( 33.070 lb )
    SPINDLE
    Spindle taperBBT50 ( ISO 50 )
    Spindle power ( cont. / 30 min. )22 / 26 ( Opt. 30 / 37 ) kW
    [ 30 / 35 HP ( Opt. 40 / 50 ) ]
    Spindle speedGear Spindle 4,000 rpm
    FEED RATE
    X-axis rapid feed rate15 m/min. ( 590 IPM )
    Y-axis rapid feed rate12 m/min. ( 472 IPM )
    Z-axis rapid feed rate12 m/min. ( 472 IPM )
    Cutting feed rate1 ~ 10 m/min. ( 1 ~ 393 IPM )
    TOOL MAGAZINE
    Tool magazine capacity32 T ( Opt. 40 / 60 / 90 / 120 )
    Max. tool diameter / adj. pocket empty350 mm ( Opt. 400 ) [ 13.7″ ( Opt. 15.7″ ) ]
    Max. tool length ( from gauge line )Ø 127 / Ø 215 mm ( Ø 5″ / Ø 8.4″ )
    Max. tool weight20 kg ( 44 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 )± 0.015 mm ( 0.00059″ ) / Full Travel
    Positioning accuracy ( VDI 3441 )P ≤ 0.030 mm ( 0.0011″ ) /Full Travel
    Repeatability ( JIS B 6338 )± 0.003 mm ( ± 0.000118″ )
    Repeatability ( VDI 3441 )Ps ≤ 0.025 mm ( 0.00098″ )
    GENERAL
    Power requirement220 V ± 10 %
    Pneumatic pressure requirement ( min. )5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
    Lubrication oil tank capacity6 liter ( 1.6 gal )
    Hydraulic unit tank capacity100 liter ( 26.4 gal )
    Coolant tank capacity1,000 liter ( 264 gal )
    Machine weight43,000 kg ( 94,800 lb )

    Specifications are subject to change without notice.

  • Yama Seiki HTP

    Specifications

    ModelHTP-4041
    CAPACITY
    X-axis travel4,000 mm ( 157.4″ )
    Y-axis travel4,100 mm ( Opt. 4,800 )
    [ 161.4″ ( Opt. 188.9″ ) ]
    Z-axis travel1,000 mm ( Opt. 1,200 / 1,400 )
    [ 39.3″ ( Opt. 47.2″ / 55.1″ ) ]
    Dist. form spindle nose to table top200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 )
    [ 7.8″ ~ 47.2″ ( Opt. 7.8″ ~ 55.1″ / 7.8″ ~ 62.9″ )]
    Dist. between columns4,300 mm ( 169.2″ )
    WORKING TABLE
    Table size ( X direction )4,020 mm ( 158.2″ )
    Table size ( Y direction )3,000 mm ( 118.1″ )
    Table load capacity15,000 kg ( 33.070 lb )
    SPINDLE
    Spindle taperBBT50 ( ISO 50 )
    Spindle power ( cont. / 30 min. )22 / 26 ( Opt. 30 / 37 ) kW
    [ 30 / 35 HP ( Opt. 40 / 50 ) ]
    Spindle speedGear Spindle 4,000 rpm
    FEED RATE
    X-axis rapid feed rate15 m/min. ( 590 IPM )
    Y-axis rapid feed rate10 m/min. ( 393 IPM )
    Z-axis rapid feed rate12 m/min. ( 472 IPM )
    Cutting feed rate1 ~ 10 m/min. ( 1 ~ 393 IPM )
    TOOL MAGAZINE
    Tool magazine capacity32 T ( Opt. 40 / 60 / 90 / 120 )
    Max. tool diameter / adj. pocket empty350 mm ( Opt. 400 ) [ 13.7″ ( Opt. 15.7″ ) ]
    Max. tool length ( from gauge line )Ø 127 / Ø 215 mm ( Ø 5″ / Ø 8.4″ )
    Max. tool weight20 kg ( 44 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 )± 0.015 mm ( 0.00059″ ) / Full Travel
    Positioning accuracy ( VDI 3441 )P ≤ 0.030 mm( 0.0011″ ) / Full Travel
    Repeatability ( JIS B 6338 )± 0.003 mm ( ± 0.000118″ )
    Repeatability ( VDI 3441 )Ps ≤ 0.025 mm ( 0.00098″ )
    GENERAL
    Power requirement220 V ± 10 %
    Pneumatic pressure requirement ( min. )5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
    Lubrication oil tank capacity6 liter ( 1.6 gal )
    Hydraulic unit tank capacity100 liter ( 26.4 gal )
    Coolant tank capacity1,000 liter ( 264 gal )
    Machine weight45,000 kg ( 99,210 lb )

    Specifications are subject to change without notice.

  • Yama Seiki HTP

    Specifications

    ModelHTP-4041Y
    CAPACITY
    X-axis travel4,000 mm ( 157.4″ )
    Y-axis travel4,800 mm ( 188.9″ )
    Z-axis travel1,000 mm ( 39.3″ )
    Dist. form spindle nose to table top200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 )
    [ 7.8″ ~ 47.2″ ( Opt. 7.8″ ~ 55.1″ / 7.8″ ~ 62.9″ )]
    Dist. between columns4,300 mm ( 169.2″ )
    WORKING TABLE
    Table size ( X direction )4,020 mm ( 158.2″ )
    Table size ( Y direction )3,000 mm ( 118.1″ )
    Table load capacity15,000 kg ( 33.070 lb )
    SPINDLE
    Spindle taperBBT50 ( ISO 50 )
    Spindle power ( cont. / 30 min. )22 / 26 ( Opt. 30 / 37 ) kW
    [ 30 / 35 HP ( Opt. 40 / 50 ) ]
    Spindle speedGear Spindle 4,000 rpm
    FEED RATE
    X-axis rapid feed rate15 m/min. ( 590 IPM )
    Y-axis rapid feed rate10 m/min. ( 393 IPM )
    Z-axis rapid feed rate12 m/min. ( 472 IPM )
    Cutting feed rate1 ~ 10 m/min. ( 1 ~ 393 IPM )
    TOOL MAGAZINE
    Tool magazine capacity32 T ( Opt. 40 / 60 / 90 / 120 )
    Max. tool diameter / adj. pocket empty350 mm ( Opt. 400 ) [ 13.7″ ( Opt. 15.7″ ) ]
    Max. tool length ( from gauge line )Ø 127 / Ø 215 mm ( Ø 5″ / Ø 8.4″ )
    Max. tool weight20 kg ( 44 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 )± 0.015 mm ( 0.00059″ ) / Full Travel
    Positioning accuracy ( VDI 3441 )P ≤ 0.030 mm( 0.0011″ ) / Full Travel
    Repeatability ( JIS B 6338 )± 0.003 mm ( ± 0.000118″ )
    Repeatability ( VDI 3441 )Ps ≤ 0.025 mm ( 0.00098″ )
    GENERAL
    Power requirement220 V ± 10 %
    Pneumatic pressure requirement ( min. )5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
    Lubrication oil tank capacity6 liter ( 1.6 gal )
    Hydraulic unit tank capacity100 liter ( 26.4 gal )
    Coolant tank capacity1,000 liter ( 264 gal )
    Machine weight45,000 kg ( 99,210 lb )

    Specifications are subject to change without notice.

SHOP BY MACHINE TYPE

FREE Appraisal


YesNo

GET A QUOTE