Bridge Mills CNC Machines

Available in Pacific NorthWest USA

 

Bridge Mills

Available Option(s):

  • f101

    Specifications

    Model F-101
    X-axis travel ( left & right ) 1,000 mm ( 39.4″ )
    Y-axis travel ( in & out ) 1,000mm ( 39.4″ )
    Z-axis travel ( up & down ) 500 mm ( 19.7″ )
    Distance from spindle
    nose to table top
    175 ~ 683 mm ( 6.9″ ~ 26.9″ )
    Cutting feede rate 20 m/min. ( 787 IPM )
    Rapid feed rate 30 m/min. ( 1180 IPM )
    TABLE
    Table size ( L x W ) 1,500 x 650 mm
    T slot ( Width x No. x pitch ) 18 x 7 x 140 mm
    ( 0.7″ x 0.3″ x 5.5″ )
    Table load 2,000 kg ( 4,400 lb )
    SPINDLE
    Spindle speed 12,000 rpm
    Spindle brand FANUC ( Direct Driven )
    Spindle motor ( cont. / 30min. ) 18.5 kW ( 24.8 HP )
    Max. torque 118 N-M
    Spindle taper CAT40
    Bearing lubrication Grease
    Spindle bearing diameter Ø70mm ( 2.8″ )
    Spindle cooling
    system
    The same temperature
    as indoor ± 1°C
    ATC
    Max. tool diameter Ø76mm ( 3.0″ )
    Max.tool length 300mm ( 11.8″ )
    Max.tool weight 7 kg ( 15.4 lb )
    Number of tools 30 pcs
    Mode Arm type
    GENERAL
    Air resource 99.57 PSI ( 7 kg / cm² )
    Total capacity 55 KVA
    Pump 0.7 + 1.17 = ( 1.87 kW )
    Volume of tank 450 L
    Machine size ( length x width x height ) 3,260 x 2,400 x 3,200 mm
    ( 128.3″ x 122.8″ x 126.0″ )
    Machine weight 12,500 kg ( 27,500 lb )
  • f16 machine

    Specifications

    Model F-16
    X-axis travel ( left & right ) 1,000 mm ( 39.4″ )
    Y-axis travel ( in & out ) 600 mm ( 23.6″ )
    Z-axis travel ( up & down ) 500 mm ( 19.7″ )
    Distance from spindle
    nose to table top
    125 ~ 625 mm ( 4.9″ ~ 24.6″ )
    Cutting feede rate 20 m/min. ( 787 IPM )
    Rapid feed rate 30 m/min. ( 1180 IPM )
    TABLE
    Table size ( L x W ) 1,300 x 600 mm
    T slot ( Width x No. x pitch ) 18 x 5 x 115 mm
    ( 0.7″ x 0.2″ x 4.5″ )
    Table load 1,000 kg ( 2,200 lb )
    SPINDLE
    Spindle speed 12,000 rpm
    Spindle brand FANUC ( Direct Driven )
    Spindle motor ( cont. / 30min. ) 18.5 kW ( 24.8 HP )
    Max. torque 118 N-M
    Spindle taper CAT40
    Bearing lubrication Grease
    Spindle bearing diameter Ø70mm ( 2.8″ )
    Spindle cooling
    system
    The same temperature
    as indoor ± 1°C
    ATC
    Max. tool diameter Ø80mm ( 3.1″ )
    Max.tool length 300mm ( 11.8″ )
    Max.tool weight 7 kg ( 15.4 lb )
    Number of tools 20 pcs
    Mode Umbrella Type
    GENERAL
    Air resource 99.57 PSI ( 7 kg / cm² )
    Total capacity 55 KVA
    Pump 0.7 + 1.17 = ( 1.87 kW )
    Volume of tank 360 L
    Machine size ( length x width x height ) 3,050 x 2,850 x 3,200 mm
    ( 120.1″ x 112.2″ x 126.0″ )
    Machine weight 11,000 kg ( 24,200 lb )
  • f7 machine

    Specifications

    Model F-7
    X-axis travel ( left & right ) 700 mm ( 27.6″ )
    Y-axis travel ( in & out ) 500 mm ( 19.7″ )
    Z-axis travel ( up & down ) 350 mm ( 13.8″ )
    Distance from spindle
    nose to table top
    150 ~ 500 mm
    ( 5.9″ ~ 19.7″ )
    Cutting feede rate 24 m/min. ( 945 IPM )
    Rapid feed rate 30 m/min. ( 1180 IPM )
    TABLE
    Table size ( L x W ) 1,050 x 600 mm
    T slot ( Width x No. x pitch ) 18 x 5 x 100 mm
    ( 0.7″ x 0.2″ x 3.9″ )
    Table load 600 kg ( 1,320 lb )
    SPINDLE
    Spindle speed 12,000 rpm
    Spindle brand TDM ( Built – In )
    Spindle motor ( cont. / 30min. ) 24 kW ( 32 HP )
    Max. torque 20 N-M
    Spindle taper HSK – E50
    Bearing lubrication Grease
    Spindle bearing diameter Ø60mm ( 2.4″ )
    Spindle cooling
    system
    The same temperature
    as indoor ± 1°C
    ATC
    Max. tool diameter Ø20mm ( 0.8″ )
    Max.tool length 200mm ( 7.9″ )
    Max.tool weight 3 kg ( 6.6 lb )
    Number of tools 20 pcs
    Mode Umbrella Type
    GENERAL
    Air resource 85.34 PSI ( 6 kg / cm² )
    Total capacity 40 KVA
    Pump 0.7 + 1.17 = ( 1.87 kW )
    Volume of tank 250 L
    Machine size ( length x width x height ) 2,650 x 2,400 x 2,850 mm
    ( 104.3″ x 94.5″ x 112.2″ )
    Machine weight 6,800 kg ( 14,960 lb )
  • Yama Seiki F 87

    Specifications

    Model F-87
    X-axis travel ( left & right ) 800 mm ( 31.5″ )
    Y-axis travel ( in & out ) 700 mm ( 27.6″ )
    Z-axis travel ( up & down ) 420 mm ( 16.5″ )
    Distance from spindle
    nose to table top
    150 ~ 570 mm ( 5.9″ ~ 22.4″ )
    Cutting feede rate 24 m/min. ( 945 IPM )
    Rapid feed rate 30 m/min. ( 1180 IPM )
    TABLE  
    Table size ( L x W ) 1,120 x 600 mm
    T slot ( Width x No. x pitch ) 18 x 5 x 125 mm ( 0.7″ x 0.2″ x 4.9″ )
    Table load 800 kg ( 1,760 lb )
    SPINDLE  
    Spindle speed 15,000 rpm
    Spindle brand MIRL-Neo (Built – In )
    Spindle motor ( cont. / 30min. ) 22 kW ( 29.5 HP )
    Max. torque 118 N-M
    Spindle taper CAT40
    Bearing lubrication Grease
    Spindle bearing diameter Ø70mm ( 2.8″ )
    Spindle cooling
    system
    The same temperature
    as indoor ± 1°C
    ATC  
    Max. tool diameter Ø35mm ( 1.4″ )
    Max.tool length 220mm ( 8.7″ )
    Max.tool weight 7 kg ( 15.4 lb )
    Number of tools 20 pcs
    Mode Umbrella Type
    GENERAL  
    Air resource 85.34 PSI ( 6 kg / cm² )
    Total capacity 40 KVA
    Pump 0.7 + 1.17 = ( 1.87 kW )
    Volume of tank 250 L
    Machine size ( length x width x height ) 2,930 x 2,240 x 3,000 mm ( 115.4″ x 88.2″ x 118.1″ )
    Machine weight 7,000 kg ( 15,400 lb )
  • Yama Seiki VP-HD series

    Specifications

    Model HD-2012
    CAPACITY
    X-axis travel 2,000 ( 78.74″ )
    Y-axis travel 1,200 mm ( 47.2″ )
    Z-axis travel 760 ( 29.92″ )
    Dist. form spindle nose to table top 200 ~ 960 mm ( 7.87″ ~ 37.7″ )
    Dist. between columns 1,300 mm ( 51.1″ )
    WORKING TABLE
    Table size ( X direction ) 2,000 ( 78.74″ )
    Table size ( Y direction ) 1,100 mm ( 43.3″ )
    Table load capacity 4,500 ( 9,920 )
    SPINDLE
    Spindle taper CAT50
    Spindle power ( cont. / 30 min. ) 22 / 26 ( 30 / 35 ) kW ( HP )
    Spindle speed 6,000 rpm
    FEED RATE
    X-axis rapid feed rate 24,000 mm/min. ( 945 IPM )
    Y-axis rapid feed rate 24,000 mm/min. ( 945 IPM )
    Z-axis rapid feed rate 15,000 mm/min. ( 590 IPM )
    Cutting feed rate 10,000 mm/min. ( 394 IPM )
    TOOL MAGAZINE
    Tool magazine capacity 32 ( Opt. 40 )
    Max. tool diameter / adj. pocket empty Ø 125 mm / 229 mm ( Ø 4.92″ / 9.01″ )
    Max. tool length ( from gauge line ) 400 ( 15.74″ )
    Max. tool weight 15 kg ( 33 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 ) ± 0.015 ( 0.0006″ ) / Full travel
    Positioning accuracy ( VDI 3441 ) P ≤ 0.02 ( 0.0008″ ) / Full travel
    Repeatability ( JIS B 6338 ) ± 0.003 ( 0.00012″ )
    Repeatability ( VDI 3441 ) Ps ≤ 0.015 ( 0.0006″ ) / Full travel
    GENERAL
    Power requirement AC 220 ± 10% 3 Phase , 60 / 50 Hz / 50 kVA
    Pneumatic pressure requirement ( min. ) 5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
    Lubrication oil tank capacity 4.5 L
    Hydraulic unit tank capacity ( pump ) 48 liter, [ 3 HP ]
    Coolant tank capacity ( pump ) 400 L ( 1 HP )
    Machine weight 18,500 kg ( 40,800 lb )

    Specifications are subject to change without notice.

  • Yama Seiki VP-HD series

    Specifications

    Model HD-3012
    CAPACITY
    X-axis travel 3,000 ( 118.11″ )
    Y-axis travel 1,200 mm ( 47.2″ )
    Z-axis travel 760 ( 29.92″ )
    Dist. form spindle nose to table top 200 ~ 960 mm ( 7.87″ ~ 37.7″ )
    Dist. between columns 1,300 mm ( 51.1″ )
    WORKING TABLE
    Table size ( X direction ) 3,000 ( 118.11″ )
    Table size ( Y direction ) 1,100 mm ( 43.3″ )
    Table load capacity 5,500 ( 12,120 )
    SPINDLE
    Spindle taper CAT50
    Spindle power ( cont. / 30 min. ) 22 / 26 ( 30 / 35 ) kW ( HP )
    Spindle speed 6,000 rpm
    FEED RATE
    X-axis rapid feed rate 20,000 mm/min. ( 788  IPM )
    Y-axis rapid feed rate 24,000 mm/min. ( 945 IPM )
    Z-axis rapid feed rate 15,000 mm/min. ( 590 IPM )
    Cutting feed rate 10,000 mm/min. ( 394 IPM )
    TOOL MAGAZINE
    Tool magazine capacity 32 ( Opt. 40 )
    Max. tool diameter / adj. pocket empty Ø 125 mm / 229 mm ( Ø 4.92″ / 9.01″ )
    Max. tool length ( from gauge line ) 400 ( 15.74″ )
    Max. tool weight 15 kg ( 33 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 ) ± 0.015 ( 0.0006″ ) / Full travel
    Positioning accuracy ( VDI 3441 ) P ≤ 0.025 ( 0.001″ ) / Full travel
    Repeatability ( JIS B 6338 ) ± 0.003 ( 0.00012″ )
    Repeatability ( VDI 3441 ) Ps ≤ 0.02 ( 0.0008″ ) / Full travel
    GENERAL
    Power requirement AC 220 ± 10% 3 Phase , 60 / 50 Hz / 50 kVA
    Pneumatic pressure requirement ( min. ) 5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
    Lubrication oil tank capacity 4.5 L
    Hydraulic unit tank capacity ( pump ) 48 liter, [ 3 HP ]
    Coolant tank capacity ( pump ) 400 L ( 1 HP )
    Machine weight 22,500 ( 49,600 lb )

    Specifications are subject to change without notice.

  • Yama Seiki HTP

    Specifications

    Model HTP-4025
    CAPACITY
    X-axis travel 4,000 mm ( 157.4″ )
    Y-axis travel 2,500 mm ( Opt. 3,200 )
    [ 98.4″ ( Opt. 125.9″ ) ]
    Z-axis travel 1,000 mm ( Opt. 1,200 / 1,400 )
    [ 39.3″ ( Opt. 47.2″ / 55.1″ ) ]
    Dist. form spindle nose to table top 200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 )
    [ 7.8″ ~ 47.2″ ( Opt. 7.8″ ~ 55.1″ / 7.8″ ~ 62.9″ )]
    Dist. between columns 2,700 mm ( 106.2″ )
    WORKING TABLE
    Table size ( X direction ) 4,020  mm ( 158.2″ )
    Table size ( Y direction ) 2,400 mm ( 94.4″ )
    Table load capacity 15,000 kg ( 33.070 lb )
    SPINDLE
    Spindle taper BBT50 ( ISO 50 )
    Spindle power ( cont. / 30 min. ) 22 / 26 ( Opt. 30 / 37 ) kW
    [ 30 / 35 HP ( Opt. 40 / 50 ) ]
    Spindle speed Gear Spindle 4,000 rpm
    FEED RATE
    X-axis rapid feed rate 15 m/min. ( 590 IPM )
    Y-axis rapid feed rate 12 m/min. ( 472 IPM )
    Z-axis rapid feed rate 12 m/min. ( 472 IPM )
    Cutting feed rate 1 ~ 10 m/min. ( 1 ~ 393 IPM )
    TOOL MAGAZINE
    Tool magazine capacity 32 T ( Opt. 40 / 60 / 90 / 120 )
    Max. tool diameter / adj. pocket empty Ø 127 / Ø 215 mm ( Ø 5″ / Ø 8.4″ )
    Max. tool length ( from gauge line ) 350 mm ( Opt. 400 ) [ 13.7″ ( Opt. 15.7″ ) ]
    Max. tool weight 20 kg ( 44 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 ) ± 0.015 mm ( 0.00059″ ) / Full Travel
    Positioning accuracy ( VDI 3441 ) P ≤ 0.030 mm ( 0.0011″ ) / Full Travel
    Repeatability ( JIS B 6338 ) ± 0.003 mm ( ± 0.000118″ )
    Repeatability ( VDI 3441 ) Ps ≤ 0.025 mm ( 0.00098″ )
    GENERAL
    Power requirement 220 V ± 10 %
    Pneumatic pressure requirement ( min. ) 5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
    Lubrication oil tank capacity 6 liter ( 1.6 gal )
    Hydraulic unit tank capacity 100 liter ( 26.4 gal )
    Coolant tank capacity 1,000 liter ( 264 gal )
    Machine weight 41,000 kg ( 90,390 lb )

    Specifications are subject to change without notice.

  • Yama Seiki HTP

    Specifications

    Model HTP-4025Y
    CAPACITY
    X-axis travel 4,000 mm ( 157.4″ )
    Y-axis travel 3,200 mm (125.9″)
    Z-axis travel 1,000 mm [ 39.3″]
    Dist. form spindle nose to table top 200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 )
    [ 7.8″ ~ 47.2″ ( Opt. 7.8″ ~ 55.1″ / 7.8″ ~ 62.9″ )]
    Dist. between columns 2,700 mm ( 106.2″ )
    WORKING TABLE
    Table size ( X direction ) 4,020  mm ( 158.2″ )
    Table size ( Y direction ) 2,400 mm ( 94.4″ )
    Table load capacity 15,000 kg ( 33.070 lb )
    SPINDLE
    Spindle taper BBT50 ( ISO 50 )
    Spindle power ( cont. / 30 min. ) 22 / 26 ( Opt. 30 / 37 ) kW
    [ 30 / 35 HP ( Opt. 40 / 50 ) ]
    Spindle speed Gear Spindle 4,000 rpm
    FEED RATE
    X-axis rapid feed rate 15 m/min. ( 590 IPM )
    Y-axis rapid feed rate 12 m/min. ( 472 IPM )
    Z-axis rapid feed rate 12 m/min. ( 472 IPM )
    Cutting feed rate 1 ~ 10 m/min. ( 1 ~ 393 IPM )
    TOOL MAGAZINE
    Tool magazine capacity 32 T ( Opt. 40 / 60 / 90 / 120 )
    Max. tool diameter / adj. pocket empty Ø 127 / Ø 215 mm ( Ø 5″ / Ø 8.4″ )
    Max. tool length ( from gauge line ) 350 mm ( Opt. 400 ) [ 13.7″ ( Opt. 15.7″ ) ]
    Max. tool weight 20 kg ( 44 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 ) ± 0.015 mm ( 0.00059″ ) / Full Travel
    Positioning accuracy ( VDI 3441 ) P ≤ 0.030 mm ( 0.0011″ ) / Full Travel
    Repeatability ( JIS B 6338 ) ± 0.003 mm ( ± 0.000118″ )
    Repeatability ( VDI 3441 ) Ps ≤ 0.025 mm ( 0.00098″ )
    GENERAL
    Power requirement 220 V ± 10 %
    Pneumatic pressure requirement ( min. ) 5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
    Lubrication oil tank capacity 6 liter ( 1.6 gal )
    Hydraulic unit tank capacity 100 liter ( 26.4 gal )
    Coolant tank capacity 1,000 liter ( 264 gal )
    Machine weight 41,000 kg ( 90,390 lb )

    Specifications are subject to change without notice.

  • Yama Seiki HTP

    Specifications

    Model HTP-4025YZ
    CAPACITY
    X-axis travel 4,000 mm ( 157.4″ )
    Y-axis travel 3,200 mm (125.9″ )
    Z-axis travel ( 1,200 mm / 47.2″ ) ( 1,400  mm/ 55.1″ )
    Dist. form spindle nose to table top 200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 )
    [ 7.8″ ~ 47.2″ ( Opt. 7.8″ ~ 55.1″ / 7.8″ ~ 62.9″ )]
    Dist. between columns 2,700 mm ( 106.2″ )
    WORKING TABLE
    Table size ( X direction ) 4,020  mm ( 158.2″ )
    Table size ( Y direction ) 2,400 mm ( 94.4″ )
    Table load capacity 15,000 kg ( 33.070 lb )
    SPINDLE
    Spindle taper BBT50 ( ISO 50 )
    Spindle power ( cont. / 30 min. ) 22 / 26 ( Opt. 30 / 37 ) kW
    [ 30 / 35 HP ( Opt. 40 / 50 ) ]
    Spindle speed Gear Spindle 4,000 rpm
    FEED RATE
    X-axis rapid feed rate 15 m/min. ( 590 IPM )
    Y-axis rapid feed rate 12 m/min. ( 472 IPM )
    Z-axis rapid feed rate 12 m/min. ( 472 IPM )
    Cutting feed rate 1 ~ 10 m/min. ( 1 ~ 393 IPM )
    TOOL MAGAZINE
    Tool magazine capacity 32 T ( Opt. 40 / 60 / 90 / 120 )
    Max. tool diameter / adj. pocket empty Ø 127 / Ø 215 mm ( Ø 5″ / Ø 8.4″ )
    Max. tool length ( from gauge line ) 350 mm ( Opt. 400 ) [ 13.7″ ( Opt. 15.7″ ) ]
    Max. tool weight 20 kg ( 44 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 ) ± 0.015 mm ( 0.00059″ ) / Full Travel
    Positioning accuracy ( VDI 3441 ) P ≤ 0.030 mm ( 0.0011″ ) / Full Travel
    Repeatability ( JIS B 6338 ) ± 0.003 mm ( ± 0.000118″ )
    Repeatability ( VDI 3441 ) Ps ≤ 0.025 mm ( 0.00098″ )
    GENERAL
    Power requirement 220 V ± 10 %
    Pneumatic pressure requirement ( min. ) 5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
    Lubrication oil tank capacity 6 liter ( 1.6 gal )
    Hydraulic unit tank capacity 100 liter ( 26.4 gal )
    Coolant tank capacity 1,000 liter ( 264 gal )
    Machine weight 41,000 kg ( 90,390 lb )

    Specifications are subject to change without notice.

  • Yama Seiki HTP

    Specifications

    Model HTP-4025Z
    CAPACITY
    X-axis travel 4,000 mm ( 157.4″ )
    Y-axis travel 2,500 mm [ 98.4″  ]
    Z-axis travel  1,200 mm (47.2″)
    Dist. form spindle nose to table top 200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 )
    [ 7.8″ ~ 47.2″ ( Opt. 7.8″ ~ 55.1″ / 7.8″ ~ 62.9″ )]
    Dist. between columns 2,700 mm ( 106.2″ )
    WORKING TABLE
    Table size ( X direction ) 4,020  mm ( 158.2″ )
    Table size ( Y direction ) 2,400 mm ( 94.4″ )
    Table load capacity 15,000 kg ( 33.070 lb )
    SPINDLE
    Spindle taper BBT50 ( ISO 50 )
    Spindle power ( cont. / 30 min. ) 22 / 26 ( Opt. 30 / 37 ) kW
    [ 30 / 35 HP ( Opt. 40 / 50 ) ]
    Spindle speed Gear Spindle 4,000 rpm
    FEED RATE
    X-axis rapid feed rate 15 m/min. ( 590 IPM )
    Y-axis rapid feed rate 12 m/min. ( 472 IPM )
    Z-axis rapid feed rate 12 m/min. ( 472 IPM )
    Cutting feed rate 1 ~ 10 m/min. ( 1 ~ 393 IPM )
    TOOL MAGAZINE
    Tool magazine capacity 32 T ( Opt. 40 / 60 / 90 / 120 )
    Max. tool diameter / adj. pocket empty Ø 127 / Ø 215 mm ( Ø 5″ / Ø 8.4″ )
    Max. tool length ( from gauge line ) 350 mm ( Opt. 400 ) [ 13.7″ ( Opt. 15.7″ ) ]
    Max. tool weight 20 kg ( 44 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 ) ± 0.015 mm ( 0.00059″ ) / Full Travel
    Positioning accuracy ( VDI 3441 ) P ≤ 0.030 mm ( 0.0011″ ) / Full Travel
    Repeatability ( JIS B 6338 ) ± 0.003 mm ( ± 0.000118″ )
    Repeatability ( VDI 3441 ) Ps ≤ 0.025 mm ( 0.00098″ )
    GENERAL
    Power requirement 220 V ± 10 %
    Pneumatic pressure requirement ( min. ) 5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
    Lubrication oil tank capacity 6 liter ( 1.6 gal )
    Hydraulic unit tank capacity 100 liter ( 26.4 gal )
    Coolant tank capacity 1,000 liter ( 264 gal )
    Machine weight 41,000 kg ( 90,390 lb )

    Specifications are subject to change without notice.

  • Yama Seiki HTP

    Specifications

    Model HTP-4033
    CAPACITY
    X-axis travel 4,000 mm ( 157.4″ )
    Y-axis travel 3,300 mm ( Opt. 4,000 )
    [ 129.9″ ( Opt. 157.4″ ) ]
    Z-axis travel 1,000 mm ( Opt. 1,200 / 1,400 )
    [ 39.3″ ( Opt. 47.2″ / 55.1″ ) ]
    Dist. form spindle nose to table top 200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 )
    [ 7.8″ ~ 47.2″ ( Opt. 7.8″ ~ 55.1″ / 7.8″ ~ 62.9″ )]
    Dist. between columns 3,500 mm ( 137.7″ )
    WORKING TABLE
    Table size ( X direction ) 4,020 mm ( 158.2″)
    Table size ( Y direction ) 3,000 mm ( 118.1″ )
    Table load capacity 15,000 kg ( 33.070 lb )
    SPINDLE
    Spindle taper BBT50 ( ISO 50 )
    Spindle power ( cont. / 30 min. ) 22 / 26 ( Opt. 30 / 37 ) kW
    [ 30 / 35 HP ( Opt. 40 / 50 ) ]
    Spindle speed Gear Spindle 4,000 rpm
    FEED RATE
    X-axis rapid feed rate 15 m/min. ( 590 IPM )
    Y-axis rapid feed rate 12 m/min. ( 472 IPM )
    Z-axis rapid feed rate 12 m/min. ( 472 IPM )
    Cutting feed rate 1 ~ 10 m/min. ( 1 ~ 393 IPM )
    TOOL MAGAZINE
    Tool magazine capacity 32 T ( Opt. 40 / 60 / 90 / 120 )
    Max. tool diameter / adj. pocket empty 350 mm ( Opt. 400 ) [ 13.7″ ( Opt. 15.7″ ) ]
    Max. tool length ( from gauge line ) Ø 127 / Ø 215 mm ( Ø 5″ / Ø 8.4″ )
    Max. tool weight 20 kg ( 44 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 ) ± 0.015 mm ( 0.00059″ ) / Full Travel
    Positioning accuracy ( VDI 3441 ) P ≤ 0.030 mm ( 0.0011″ ) /Full Travel
    Repeatability ( JIS B 6338 ) ± 0.003 mm ( ± 0.000118″ )
    Repeatability ( VDI 3441 ) Ps ≤ 0.025 mm ( 0.00098″ )
    GENERAL
    Power requirement 220 V ± 10 %
    Pneumatic pressure requirement ( min. ) 5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
    Lubrication oil tank capacity 6 liter ( 1.6 gal )
    Hydraulic unit tank capacity 100 liter ( 26.4 gal )
    Coolant tank capacity 1,000 liter ( 264 gal )
    Machine weight 43,000 kg ( 94,800 lb )

    Specifications are subject to change without notice.

  • Yama Seiki HTP

    Specifications

    Model HTP-4033Y
    CAPACITY
    X-axis travel 4,000 mm ( 157.4″ )
    Y-axis travel 4,000 mm ( 157.4″ )
    Z-axis travel 1,000 mm ( 39.3″ )
    Dist. form spindle nose to table top 200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 )
    [ 7.8″ ~ 47.2″ ( Opt. 7.8″ ~ 55.1″ / 7.8″ ~ 62.9″ )]
    Dist. between columns 3,500 mm ( 137.7″ )
    WORKING TABLE
    Table size ( X direction ) 4,020 mm ( 158.2″)
    Table size ( Y direction ) 3,000 mm ( 118.1″ )
    Table load capacity 15,000 kg ( 33.070 lb )
    SPINDLE
    Spindle taper BBT50 ( ISO 50 )
    Spindle power ( cont. / 30 min. ) 22 / 26 ( Opt. 30 / 37 ) kW
    [ 30 / 35 HP ( Opt. 40 / 50 ) ]
    Spindle speed Gear Spindle 4,000 rpm
    FEED RATE
    X-axis rapid feed rate 15 m/min. ( 590 IPM )
    Y-axis rapid feed rate 12 m/min. ( 472 IPM )
    Z-axis rapid feed rate 12 m/min. ( 472 IPM )
    Cutting feed rate 1 ~ 10 m/min. ( 1 ~ 393 IPM )
    TOOL MAGAZINE
    Tool magazine capacity 32 T ( Opt. 40 / 60 / 90 / 120 )
    Max. tool diameter / adj. pocket empty 350 mm ( Opt. 400 ) [ 13.7″ ( Opt. 15.7″ ) ]
    Max. tool length ( from gauge line ) Ø 127 / Ø 215 mm ( Ø 5″ / Ø 8.4″ )
    Max. tool weight 20 kg ( 44 lb )
    ACCURACY
    Positioning accuracy ( JIS B 6338 ) ± 0.015 mm ( 0.00059″ ) / Full Travel
    Positioning accuracy ( VDI 3441 ) P ≤ 0.030 mm ( 0.0011″ ) /Full Travel
    Repeatability ( JIS B 6338 ) ± 0.003 mm ( ± 0.000118″ )
    Repeatability ( VDI 3441 ) Ps ≤ 0.025 mm ( 0.00098″ )
    GENERAL
    Power requirement 220 V ± 10 %
    Pneumatic pressure requirement ( min. ) 5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
    Lubrication oil tank capacity 6 liter ( 1.6 gal )
    Hydraulic unit tank capacity 100 liter ( 26.4 gal )
    Coolant tank capacity 1,000 liter ( 264 gal )
    Machine weight 43,000 kg ( 94,800 lb )

    Specifications are subject to change without notice.

SHOP BY MACHINE TYPE