Specifications
Model | LP-5025YZ |
CAPACITY | |
X-axis travel | 5,000 mm ( 196.8″ ) |
Y-axis travel | 125.9″ |
Z-axis travel | 1,000 ( 39.3″ ) |
Dist. form spindle nose to table top | 240 ~ 1,000 mm ( 9.4″ ~ 39.3″ ) |
Dist. between columns | 2,700 mm ( 106.3″ ) |
WORKING TABLE | |
Table size ( X direction ) | 5,020 mm ( 197.6″ ) |
Table size ( Y direction ) | 2,400 mm ( 94.4″ ) |
Table load capacity | 18,000 kg ( 39,680 lb ) |
SPINDLE | |
Spindle taper | CAT50 |
Spindle power ( cont. / 30 min. ) | 22 / 26 kW ( 30 / 35 HP ) |
Spindle speed | 6,000 / 8,000 rpm Build-in Spindle ( Opt. ) |
FEED RATE | |
X-axis rapid feed rate | 10 m/min. ( 393 IPM ) |
Y-axis rapid feed rate | 15 m/min. ( 590 IPM ) |
Z-axis rapid feed rate | 15 m/min. ( 590 IPM ) |
Cutting feed rate | 10 m / min. ( 393 IPM ) |
TOOL MAGAZINE | |
Tool magazine capacity | 32 ( 60 / 90 / 120 Opt. ) |
Max. tool diameter / adj. pocket empty | Ø 127 / 215 mm ( Ø 5.0″ / 8.4″ ) |
Max. tool length ( from gauge line ) | 350 mm ( 13.7″ ) |
Max. tool weight | 20 kg ( 44 lb ) |
ACCURACY | |
Positioning accuracy ( JIS B 6338 ) | P ≤ 0.015 mm ( P ≤ 0.00059″ ) |
Positioning accuracy ( VDI 3441 ) | P ≤ 0.040 mm ( P ≤ 0.00157″ ) |
Repeatability ( JIS B 6338 ) | ± 0.003 ( 0.00012″ ) |
Repeatability ( VDI 3441 ) | Ps ≤ 0.030 mm ( Ps ≤ 0.000118″ ) |
GENERAL | |
Power requirement | 220 V ± 10 % |
Pneumatic pressure requirement ( min. ) | 5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI ) |
Lubrication oil tank capacity | 6 liter ( 1.6 gal ) |
Hydraulic unit tank capacity ( pump ) | 120 liter ( 31.5 gal ), [ 10 HP ] |
Coolant tank capacity ( pump ) | 750 liter ( 198 gal ) , [ 1.5 HP ] |
Machine weight | 44,000 kg ( 96,800 lb ) |
Specifications are subject to change without notice.
Reviews
There are no reviews yet.