• 01

    Specifications

    Hyundai WIA L400D Lathe  2017 Semi Used 
    Controller Fanuc Oi-TF with 10.4″ LCD
    Swing30.7″
    Maximum Cutting Diameter24.8″
    Maximum Workpiece Length46.1″
    Travel X axis12.8″
    Travel Z axis47.4″
    Guide Ways Boxed on X Linear For ZBoxed
    SpindleA2 – 15
    Max Bar Work Diameter6.5″
    Max RPM1,500 rpm
    Rapid Traverse X Axis787 ipm
    Rapid Traverse Z Axis944 ipm
    Turret12 Tools
    Tool Size  (Square Shank)1.1/4″ sq
    Tool Size  (Round Shank)2.5″ ID rd
    Index Time – Tool to Next Tool.2 sec
    Chuck18″
    Tailstock Quill Diameter5.9″
    Tailstock Quill Travel  (Programmable)5.9″
    Tailstock Body Travel  (Programmable)82.7″
    Tailstock Quill Internal Taper (Built-In Type)MT #5
    Gear Box2
    Horsepower50Hp
    Torque1,436 Ft-lbs
    Weight24,250 lbs
    Bed45 deg
    Standard Tooling PackageYes
    Q – SetterTouch
    Optional Equipment 
    Chip ConveyorHinge Right
    Manual Guide I 
    Thread Pick up 
    C/w 6mths Warranty Parts/Labor 
  • DescriptionUnitE160AE160LAE160LMA
    Max Turning Diainch11″11″7.5″
    Max Turning Lengthinch11.8″20.1″17.7″
    Chuck Sizeinch6″6″6″
    Driving MethodBeltBeltBelt
    Spindle RPMr/min6,0006,0006,000
    Spindle OutputHP10/1510/1515/20
    Spindle Torquelbf.ft26.4/51.626.4/51.638.7/70.4
    Travel(X/Z)inch6.5″/13″6.5″/20.9″6.5″/18.1″
    Rapid Travel(X/Z)m/min30/3030/3030/30
    Slide TypeLMLMLM
    No. of ToolsEA121212
    Tool Sizeinch0.8″/1.30.8″/1.3″0.8″/1.3″
    Milling Tool Speedr/min4,500

    Specifications are subject to change without notice for quality improvement.
    In case of any further information, please refer to the machine catalogue.

  • GTH 2000

    Specifications

    DescriptionUnitGTH2000
    CAPACITYSwing Over the Bedmm(in)Ø600 (23.6″)
    Max. Turning Dia.mm(in)Ø 300 mm ( Ø 11.8" )
    Std. Turning Lengthmm(in)Ø 260 mm ( Ø 10.2" )
    Max. Turning Lenghtmm(in)Ø 205 mm ( 8.1" )
    SPINDLEChuck Sizein10"
    Spindle Boremm(in)Ø 66 mm ( Ø 2.6" )
    Spindle Speed (rpm)r/min24 ~ 4,000 rpm
    Motor (Max/Cont.)kW(HP)11 / 15 kW ( 15 / 20 HP )
    Torque (Max/Cont.)N.m70/47.7(51.6/35.2) [69/57.3(50.8/42.2)]
    Spindle Type-Direct Belt Drive
    Spindle Nose-A2-6
    FEEDTravel (X/Z)mm(in)195 / 220 mm ( 7.7" / 8.6" )
    Rapid Travel (X/Z)m/min24 m/min. ( 945 IPM )
    Feed rates-0~ 500 mm/min. ( 0 ~ 19.7 IPM )
    X / Z axes servo motor-AC 1.6 kW ( 2 HP ) / AC 3 kW ( 4 HP )
    X / Z axes ball screw Ø / pitch-Ø 32 x P8 mm ( Ø 1.2" x P8 )
    X / Z axes thrust ( cont. )-644 / 958 Kgf ( 1,420 / 2,112 lbf )
    Slide Type-Box way
    TURRETNo. of ToolEA12
    Tool SizeOD mm(in)Ø25 (1″)
    ID   mm(in)Ø40 (1.6″)
    Indexing drive-FANUC AC Servo motor
    Indexing speed-0.2 sec. ( Adjacnt ) / 0.5 sec. ( 180˚ Single step )
    TANK CAPACITYCoolant Tankℓ(gal)160 L ( 42.3 gal )
    Lubricating Tankℓ(gal)30 L ( 7.9 gal )
    POWER SUPPLYElectric Power SupplykVA65 kVA
    Thickness of Power Cable
    VoltageV/Hz220/60 (200/50)
    MACHINEFloor Space (L×W)mm4,840 x 2,155
    in190.6" x 84.9"
    Heightmm(in)3,450 (135.9")
    Weightkg(lb)6,800 Kg ( 14,992 lb )
    NCControllerFANUC Oi -TF ( Opt. 31i )

    GTH 2000

    Specifications

    DescriptionUnitGTH2000
    CAPACITYSwing Over the Bedmm(in)Ø600 (23.6″)
    Max. Turning Dia.mm(in)Ø 300 mm ( Ø 11.8" )
    Std. Turning Lengthmm(in)Ø 260 mm ( Ø 10.2" )
    Max. Turning Lenghtmm(in)Ø 205 mm ( 8.1" )
    SPINDLEChuck Sizein10"
    Spindle Boremm(in)Ø 66 mm ( Ø 2.6" )
    Spindle Speed (rpm)r/min24 ~ 4,000 rpm
    Motor (Max/Cont.)kW(HP)11 / 15 kW ( 15 / 20 HP )
    Torque (Max/Cont.)N.m70/47.7(51.6/35.2) [69/57.3(50.8/42.2)]
    Spindle Type-Direct Belt Drive
    Spindle Nose-A2-6
    FEEDTravel (X/Z)mm(in)195 / 220 mm ( 7.7" / 8.6" )
    Rapid Travel (X/Z)m/min24 m/min. ( 945 IPM )
    Feed rates-0~ 500 mm/min. ( 0 ~ 19.7 IPM )
    X / Z axes servo motor-AC 1.6 kW ( 2 HP ) / AC 3 kW ( 4 HP )
    X / Z axes ball screw Ø / pitch-Ø 32 x P8 mm ( Ø 1.2" x P8 )
    X / Z axes thrust ( cont. )-644 / 958 Kgf ( 1,420 / 2,112 lbf )
    Slide Type-Box way
    TURRETNo. of ToolEA12
    Tool SizeOD mm(in)Ø25 (1″)
    ID   mm(in)Ø40 (1.6″)
    Indexing drive-FANUC AC Servo motor
    Indexing speed-0.2 sec. ( Adjacnt ) / 0.5 sec. ( 180˚ Single step )
    TANK CAPACITYCoolant Tankℓ(gal)160 L ( 42.3 gal )
    Lubricating Tankℓ(gal)30 L ( 7.9 gal )
    POWER SUPPLYElectric Power SupplykVA65 kVA
    Thickness of Power Cable
    VoltageV/Hz220/60 (200/50)
    MACHINEFloor Space (L×W)mm4,840 x 2,155
    in190.6" x 84.9"
    Heightmm(in)3,450 (135.9")
    Weightkg(lb)6,800 Kg ( 14,992 lb )
    NCControllerFANUC Oi -TF ( Opt. 31i )

  • Hyunda Wia F500/50

    Travel (X / Y / Z )
    43.3" / 20.07" / 25"

    Specifications

    DescriptionUnitF400F500PLUSF500/50
    Table Sizemm1000×4601200×5001200×500
    Max. Load Capacitykg600800800
    Spindle Driving MethodBeltBeltBelt
    Spindle TaperBBT40BBT40BT50
    Spindle RPMr/min8,0008,0006,000
    Spindle PowerkW15/1115/1115/11
    Spindle TorqueN.m95/70286/143358/179
    Travel(X/Y/Z)mm800/460/5201060/510/6351100/510/635
    Rapid Feed Rate(X/Y/Z)m/min32/32/3236/36/3036/36/30
    Slide TypeLMLMLM
    No. of ToolsEA243024
    Tool Change Time
    (Chip To Chip)
    sec3.63.75.9

    Specifications are subject to change without notice for quality improvement.
    In case of any further information, please refer to the machine catalogue.

    Hyunda Wia F500/50

    Travel (X / Y / Z )
    43.3" / 20.07" / 25"

  • Hyunda Wia F650/50

    Travel (X/Y/Z)
    55.1" / 25.98" / 25"

    Specifications

    DescriptionUnitF650PLUSF650/50
    Table Sizemm1600×6501600×650
    Max. Load Capacitykg13001300
    Spindle Driving MethodBeltBelt
    Spindle TaperBBT40BT50
    Spindle RPMr/min8,0006,000
    Spindle PowerkW15/1115/11
    Spindle TorqueN.m286/143358/179
    Travel(X/Y/Z)mm1400/660/6351400/660/635
    Rapid Feed Rate(X/Y/Z)m/min36/36/3036/36/30
    Slide TypeLMLM
    No. of ToolsEA3024
    Tool Change Time
    (Chip To Chip)
    sec3.86

    Specifications are subject to change without notice for quality improvement.
    In case of any further information, please refer to the machine catalogue.

    Hyunda Wia F650/50

    Travel (X/Y/Z)
    55.1" / 25.98" / 25"

  • Specifications

    DescriptionUniti-CUT400M
    Table Sizemm650×400
    Max. Load Capacitykg300
    Spindle Driving MethodDirect
    Spindle TaperBBT30
    Spindle RPMr/min24,000
    Spindle PowerkW22.6/3.5
    Spindle TorqueN.m24/3.7
    Travel(X/Y/Z)mm500/400/330
    Rapid Feed Rate(X/Y/Z)m/min56/56/56
    Slide TypeLM
    No. of ToolsEA14
    Tool Change Time
    (Chip To Chip)
    sec1.89

    Specifications are subject to change without notice for quality improvement.
    In case of any further information, please refer to the machine catalogue.

  • 01
    01
  • Specifications

    DescriptionUnitE160CE160LCE160LMC
    Max Turning Diamm280280190
    Max Turning Lengthmm280510450
    Chuck Sizeinch8″8″8″
    Driving MethodBeltBeltBelt
    Spindle RPMr/min4,0004,0004,000
    Spindle OutputkW11/7.511/7.515/11
    Spindle TorqueN.m64.4/12664.4/12694.5/171.8
    Travel(X/Z)mm165/330165/530165/460
    Rapid Travel(X/Z)m/min30/3030/3030/30
    Slide TypeLMLMLM
    No. of ToolsEA101012
    Tool Sizemm25/3225/3220/32
    Milling Tool Speedr/min4,500

    Specifications are subject to change without notice for quality improvement.
    In case of any further information, please refer to the machine catalogue.

     

     

SHOP BY MACHINE TYPE

FREE Appraisal


YesNo

GET A QUOTE