Yama Seiki GS-6000ML (18 inch)

Compare Yama Seiki GS-6000ML (18 inch) with other machines in its class , , ,

In stock

Specifications

DescriptionUnitGS-6000ML
CAPACITYMax. / Swing over saddlemm(in)980 mm (38.6″)
Max. Turning Diametermm(in) 879 mm (34.6″)
Max. Turning Lengthmm(in)950 mm (37.4″)
Bar Capacitymm(in)259 mm (4.5’)
SPINDLEChuck Size(in)(18″)
Hole through spindlemm(in)130 mm (5.11″)
Spindle Speed (rpm)rpm1,200 rpm
Motor output ( cont. / 30 min.)Hp / kW40 / 50 HP ( 30 / 37 kW )
Motor (Max/Cont.)kW(HP)
Torque (Max/Cont.)N.m
Spindle TypeV-Belt + Gear Box
Spindle NoseA2-11
FEEDTravel (X/Z)mm(in)500mm (19.68’) / 980mm (38.58’)
Rapid Travel (X/Z)m/min24 m/min
Slide TypeBox Way
X-axis servo motorHP (KW)
Z-axis servo motorHP (KW)
BLOCK TOOLNo. of Tool / StationsT12
Tool SizeOD mm(in)32 mm (1”)
ID   mm(in)60mm (2”)
TANK CAPACITYCoolant TankGallon / litre63 gal (240L)
Lubricating Tankℓ(gel)
POWER SUPPLYElectric Power SupplykVA64 kVA
Thickness of Power CableSq
VoltageV/Hz
MACHINEDimensions
(L×WxH)
mm(in)145.51″ x 95.27″ x 101.10″ ( 3,696 x 2,420 x 2,568 mm )
Weightkg(lb)12,000 kg ( 26,450 lb )
NCControllerOi-TD

Maximum Performance Turning Center

With Leading technologies and the highest quality components, the GS-6000 series ultra high performance turning center combined super high power output, high rigidity construction, large diameter servo driven turret and YAMA SEIKI 35 years experiences. It provides big working range and super heavy cutting capability. Additional, live tooling turret and C-axis are available to allow GS-6000 series can turning, milling, drilling and tapping. Thus, done in once can be achieved. Furthermore, the excellent machine performance and durable components can meet today and tomorrow’s most demanding turning application.

  • The first thing you’ll notice inside the door of the GS-6000 series is the massive turret, which boasts a turret disk over 28 inches in diameter. Blazing fast indexing times of 0.5 seconds from station to station and 1.5 second for stations at 180 degrees are achieved with servo indexing technology.
  • Under the covers, you’ll find a 45 degrees true slant bed with super wide box ways, and an enormous 2-speed head stock driven by a 60 HP ( Peak ) FANUC motor.
  • Combined Industrial design, the perfect fully enclosed protection covers can isolates cutting chip and coolant inside the machine.

Tailstock shown

  • Positioning of the programmable base tailstock has been simplified through use of custom software interface. The Z-axis carriage automatically locks on to the base of the tailstock and drags it to the desired position.
  • The built-in bearings quill provide greater rigidity for heavyloads. The extension and retraction of the quill is programmable and thrust pressure adjustable.

 

Submit your review

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

SHOP BY MACHINE TYPE

FREE Appraisal


YesNo

GET A QUOTE