Yama Seiki – Goodway
Horizontal Turning Centers

  • GA Series – High Performance Turning Center
  • GLS 150 Series – High Speed Turning Center
  • GLS 2800 / 3300 Series – High Speed Turning Centers
  • GS 200 Series – Ultra Performance Turning Center
  • GS 2000 / 300 Series – Maximum Performance Turning Center
  • GS 4000 Series – Ultra Performance Turning Center
  • GS 6000L Series – Heavy Duty Turning Center
  • GS 8000 Series  – Heavy Duty Supersize Turning Center
  • HA Series – Flat-bed Turning Center
  • TS 100 Series – Gang Type Turning Center

Yama Seiki

Available Option(s):

  • Specifications

    DescriptionUnitGA-3300L
    CAPACITYMax. / Swing over saddlemm(in)599 mm (23.6″)
    Max. Turning Diametermm(in)500 mm (19.7″)
    Max. Turning Lengthmm(in)622 mm (24.5″)
    Bar Capacitymm(in)76 mm (3’)
    SPINDLEChuck Size(in)(12″)
    Hole through spindlemm(in)101mm (3.98”)
    Spindle Speed (rpm)rpm3,000 rpm
    Motor output ( cont. / 30 min.)Hp / kW18.5  / 22 kW ( 25 / 30 HP )
    Motor (Max/Cont.)kW(HP)
    Torque (Max/Cont.)N.m
    Spindle TypeDirect Belt Drive
    Spindle NoseA2-8
    FEEDTravel (X/Z)mm(in)260 mm(10.23”) / 630mm (24.80”)
    Rapid Travel (X/Z)m/min24m/min
    Slide TypeHardened & Ground Box Ways
    X-axis servo motorHP (KW)4 HP(2.7 kW)
    Z-axis servo motorHP (KW)6 HP (4.5 kW)
    BLOCK TOOLNo. of Tool / StationsT12
    Tool SizeOD mm(in)25mm(1”)
    ID   mm(in)40mm(1”)
    TANK CAPACITYCoolant TankGallon / litre38 gal. (145L)
    Lubricating Tankℓ(gel)
    POWER SUPPLYElectric Power SupplykVA38 kVA
    Thickness of Power CableSq
    VoltageV/Hz
    MACHINEDimensions
    (L×WxH)
    mm(in)2,845 x 1,965 x 1,910 ( 112.0″ x 77.4″ x 75.1″)
    Weightkg(lb)5,800 kg ( 12,760 lb )
    NCControllerFANUC Oi-TD
  • Specifications

    DescriptionUnitGA-2000 L
    CAPACITYMax. / Swing over saddlemm(in)580 mm (22.83″)
    Max. Turning Diametermm(in) 350 mm (13.77″)
    Max. Turning Lengthmm(in)1,204 mm (47.39″)
    Bar Capacitymm(in)51 mm (2’)
    SPINDLEChuck Size(in)(8″)
    Hole through spindlemm(in)66mm (2.59″)
    Spindle Speed (rpm)rpm4,800 rpm
    Motor output ( cont. / 30 min.)Hp / kW20 HP (15kW)
    Motor (Max/Cont.)kW(HP)
    Torque (Max/Cont.)N.m360 N-m
    Spindle TypeDirect Belt Drive
    Spindle NoseA2-6
    FEEDTravel (X/Z)mm(in)(205mm (8.07’) (1,230mm (48.42”)
    Rapid Travel (X/Z)m/min20 m/min
    Slide TypeHardened & Ground Box Ways
    X-axis servo motorHP (KW)2.1 HP ( 1.6 kW)
    Z-axis servo motorHP (KW)4 HP ( 3.0 kW)
    BLOCK TOOLNo. of Tool / StationsT12
    Tool SizeOD mm(in)25mm (1’)
    ID   mm(in)40mm (1’)
    TANK CAPACITYCoolant TankGallon / litre38 gal (145L)
    Lubricating Tankℓ(gel)
    POWER SUPPLYElectric Power SupplykVA220
    Thickness of Power CableSq
    VoltageKVa26 kVa
    MACHINEDimensions
    (L×WxH)
    mm(in)4,235 x 1,630 x 1,890 mm ( 166.7″ x 64.2″ x 74.4″ )
    Weightkg(lb)4,600 kg ( 10,120 lb )
    NCControllerFANUC Oi-TC
  • Specifications

    DescriptionUnitGA-2000 C
    CAPACITYMax. / Swing over saddlemm(in)579 mm (22.8″)
    Max. Turning Diametermm(in) 351 mm (13.8″)
    Max. Turning Lengthmm(in)309 mm (12.16″)
    Bar Capacitymm(in)51 mm (2’)
    SPINDLEChuck Size(in)(8″)
    Hole through spindlemm(in)66mm (2.59″)
    Spindle Speed (rpm)rpm4,800
    Motor output ( cont. / 30 min.)Hp / kW20 HP (15kW)
    Motor (Max/Cont.)kW(HP)
    Torque (Max/Cont.)N.m238 N-m
    Spindle TypeDirect Belt Drive
    Spindle NoseA2-6
    FEEDTravel (X/Z)mm(in)(230mm (90’) (630mm (24.8’)
    Rapid Travel (X/Z)m/min30 m/min
    Slide TypeHardened & Ground Box Ways
    X-axis servo motorHP (KW)2.1 HP ( 1.6 kW)
    Z-axis servo motorHP (KW)4 HP ( 3.0 kW)
    BLOCK TOOLNo. of Tool / StationsT12
    Tool SizeOD mm(in)25mm (1’)
    ID   mm(in)40mm (1’)
    TANK CAPACITYCoolant TankGallon / litre55 gal (200L)
    Lubricating Tankℓ(gel)
    POWER SUPPLYElectric Power SupplykVA220
    Thickness of Power CableSq
    VoltageKVa200
    MACHINEDimensions
    (L×WxH)
    mm(in)78″ x 92″ x 68″ ( 1,975 x 2,235 x 1,725 mm )
    Weightkg(lb)3,500 kg (7,700lb)
    NCControllerFANUC Oi-TC
  • Specifications

    DescriptionUnitGA-2000 CM
    CAPACITYMax. / Swing over saddlemm(in)579 mm (22.8″)
    Max. Turning Diametermm(in) 351 mm (13.8″)
    Max. Turning Lengthmm(in)310 mm (12.2″)
    Bar Capacitymm(in)51 mm (2’)
    SPINDLEChuck Size(in)(8″)
    Hole through spindlemm(in)66mm (2.59″)
    Spindle Speed (rpm)rpm4,800 rpm
    Motor output ( cont. / 30 min.)Hp / kW11 / 20 kW
    ( 15 / 20 HP)
    Motor (Max/Cont.)kW(HP)
    Torque (Max/Cont.)N.m175 / 238 N-m
    Spindle TypeFanuc
    Spindle NoseA2-6
    FEEDTravel (X/Z)mm(in)12.99” + 0.78”(330 mm + 20mm)
    Rapid Travel (X/Z)m/min20 m/min
    Slide TypeHardened & Ground Box Ways
    X-axis servo motorHP (KW)2.1 HP ( 1.6 kW)
    Z-axis servo motorHP (KW)3.0 HP ( 3.0 kW)
    BLOCK TOOLNo. of Tool / StationsT12
    Tool SizeOD mm(in)25mm (1’)
    ID   mm(in)40mm (1’)
    TANK CAPACITYCoolant TankGallon / litre55 gal (200L)
    Lubricating Tankℓ(gel)
    POWER SUPPLYElectric Power SupplykVA
    Thickness of Power CableSq
    VoltageV/Hz
    MACHINEDimensions
    (L×WxH)
    mm(in)78”x 92”x 68”(1,975 x 2,235 x 1,725 mm)
    Weightkg(lb)3,500 kg (7,700lb)
    NCControllerFANUC Oi-TC
  • Specifications

    DescriptionUnitGA-2000 ML
    CAPACITYMax. / Swing over saddlemm(in)579 mm (22.8″)
    Max. Turning Diametermm(in) 351 mm (13.8″)
    Max. Turning Lengthmm(in)310 mm (12.2″)
    Bar Capacitymm(in)51 mm (2’)
    SPINDLEChuck Size(in)(8″)
    Hole through spindlemm(in)66mm (2.59″)
    Spindle Speed (rpm)rpm4,800 rpm
    Motor output ( cont. / 30 min.)Hp / kW11 / 20 kW
    ( 15 / 20 HP)
    Motor (Max/Cont.)kW(HP)
    Torque (Max/Cont.)N.m175 / 238 N-m
    Spindle TypeFanuc
    Spindle NoseA2-6
    FEEDTravel (X/Z)mm(in)12.99” + 0.78”(330 mm + 20mm)
    Rapid Travel (X/Z)m/min20 m/min
    Slide TypeHardened & Ground Box Ways
    X-axis servo motorHP (KW)2.1 HP ( 1.6 kW)
    Z-axis servo motorHP (KW)3.0 HP ( 3.0 kW)
    BLOCK TOOLNo. of Tool / StationsT12
    Tool SizeOD mm(in)25mm (1’)
    ID   mm(in)40mm (1’)
    TANK CAPACITYCoolant TankGallon / litre55 gal (200L)
    Lubricating Tankℓ(gel)
    POWER SUPPLYElectric Power SupplykVA
    Thickness of Power CableSq
    VoltageV/Hz
    MACHINEDimensions
    (L×WxH)
    mm(in)163” x 65” x 73”(4,132 x 1,630 x 1,875 mm)
    Weightkg(lb)3,500 kg (7,700lb)
    NCControllerFANUC Oi-TC
  • Specifications

    DescriptionUnitGA-2600L
    CAPACITYMax. / Swing over saddlemm(in)580 mm (22.8″)
    Max. Turning Diametermm(in) 351 mm (13.8″)
    Max. Turning Lengthmm(in)606 mm (23.85″)
    Bar Capacitymm(in)64 mm (2.5’)
    SPINDLEChuck Size(in)(10″)
    Hole through spindlemm(in)66mm (2.59”)
    Spindle Speed (rpm)rpm4,000 rpm
    Motor output ( cont. / 30 min.)Hp / kW15 / 20 HP (11 / 15 kW)
    Motor (Max/Cont.)kW(HP)
    Torque (Max/Cont.)N.m
    Spindle TypeFANUC
    Spindle NoseA2-8
    FEEDTravel (X/Z)mm(in)165mm (6.50”) / 330mm (12.99”)
    Rapid Travel (X/Z)m/min24m/min
    Slide TypeHardened & Ground Box Ways
    X-axis servo motorHP (KW)2.1 HP(1.6kW)
    Z-axis servo motorHP (KW)4 HP (3.0kW)
    BLOCK TOOLNo. of Tool / StationsT12
    Tool SizeOD mm(in)25mm(1”)
    ID   mm(in)40mm(1”)
    TANK CAPACITYCoolant TankGallon / litre55 gal. (200L)
    Lubricating Tankℓ(gel)
    POWER SUPPLYElectric Power SupplykVA26kVA
    Thickness of Power CableSq
    VoltageV/Hz
    MACHINEDimensions
    (L×WxH)
    mm(in)163″ x 65″ x 73″ ( 4,132 x 1,630 x 1,875 mm )
    Weightkg(lb)3,500kg (7,700lb)
    NCControllerFANUC Oi-TC
  • Specifications

    DescriptionUnitGA-2600C
    CAPACITYMax. / Swing over saddlemm(in)400 mm (15.74″)
    Max. Turning Diametermm(in) 350 mm (13.77″)
    Max. Turning Lengthmm(in)606 mm (23.86″)
    Bar Capacitymm(in)65 mm (2.55’)
    SPINDLEChuck Size(in)(10″)
    Hole through spindlemm(in)66mm (2.59”)
    Spindle Speed (rpm)rpm4,000 rpm
    Motor output ( cont. / 30 min.)Hp / kW20.45 / 25.22 HP (15 / 18.5 kW)
    Motor (Max/Cont.)kW(HP)
    Torque (Max/Cont.)N.m
    Spindle TypeDirect Belt Drive
    Spindle NoseA2-8
    FEEDTravel (X/Z)mm(in)165mm (6.50”) / 330mm (12.99”)
    Rapid Travel (X/Z)m/min24m/min
    Slide TypeHardened & Ground Box Ways
    X-axis servo motorHP (KW)2.1 HP(1.6kW)
    Z-axis servo motorHP (KW)4 HP (3.0kW)
    BLOCK TOOLNo. of Tool / StationsT12
    Tool SizeOD mm(in)25mm(0.98”)
    ID   mm(in)40mm(1”)
    TANK CAPACITYCoolant TankGallon / litre55 gal. (200L)
    Lubricating Tankℓ(gel)
    POWER SUPPLYElectric Power SupplykVA26kVA
    Thickness of Power CableSq
    VoltageV/Hz
    MACHINEDimensions
    (L×WxH)
    mm(in)78″ x 92″ x 68″ ( 1,975 x 2,235 x 1,725 mm )
    Weightkg(lb)3,500kg (7,700lb)
    NCControllerFANUC Oi-TC
  • Specifications

    DescriptionUnitGA-2600CM
    CAPACITYMax. / Swing over saddlemm(in)579 mm (22.8″)
    Max. Turning Diametermm(in)351 mm (13.8″)
    Max. Turning Lengthmm(in)292 mm (11.5″)
    Bar Capacitymm(in)64 mm (2.5’)
    SPINDLEChuck Size(in)(10″)
    Hole through spindlemm(in)76mm (2.99”)
    Spindle Speed (rpm)rpm4,000 rpm
    Motor output ( cont. / 30 min.)Hp / kW11 / 15 kW ( 15 / 20 HP )
    Motor (Max/Cont.)kW(HP)
    Torque (Max/Cont.)N.m
    Spindle TypeDirect Belt Drive
    Spindle NoseA2-8
    FEEDTravel (X/Z)mm(in)165mm(6.50”) / 330mm (12.99”)
    Rapid Travel (X/Z)m/min24m/min
    Slide TypeHardened & Ground Box Ways
    X-axis servo motorHP (KW)2.1 HP(1.6 kW)
    Z-axis servo motorHP (KW)4 HP (3.0 kW)
    BLOCK TOOLNo. of Tool / StationsT12
    Tool SizeOD mm(in)25mm(1”)
    ID   mm(in)40mm(1”)
    TANK CAPACITYCoolant TankGallon / litre55 gal. (200L)
    Lubricating Tankℓ(gel)
    POWER SUPPLYElectric Power SupplykVA26 kVA
    Thickness of Power CableSq
    VoltageV/Hz
    MACHINEDimensions
    (L×WxH)
    mm(in) 78″ x 92″ x 68″ ( 1,975 x 2,235 x 1,725 mm )
    Weightkg(lb)7,700 lbs. ( 3,500 Kg )
    NCControllerFANUC Oi-TC
  • Specifications

    DescriptionUnitGA-2600ML
    CAPACITYMax. / Swing over saddlemm(in)579 mm (22.8″)
    Max. Turning Diametermm(in)351 mm (13.8″)
    Max. Turning Lengthmm(in)584 mm (23″)
    Bar Capacitymm(in)64 mm (2.5’)
    SPINDLEChuck Size(in)(10″)
    Hole through spindlemm(in)76mm (2.99”)
    Spindle Speed (rpm)rpm4,000 rpm
    Motor output ( cont. / 30 min.)Hp / kW11 / 15 kW ( 15 / 20 HP )
    Motor (Max/Cont.)kW(HP)
    Torque (Max/Cont.)N.m
    Spindle TypeDirect Belt Drive
    Spindle NoseA2-8
    FEEDTravel (X/Z)mm(in)165mm(6.50”) / 330mm (12.99”)
    Rapid Travel (X/Z)m/min24m/min
    Slide TypeHardened & Ground Box Ways
    X-axis servo motorHP (KW)2.1 HP(1.6 kW)
    Z-axis servo motorHP (KW)4 HP (3.0 kW)
    BLOCK TOOLNo. of Tool / StationsT12
    Tool SizeOD mm(in)25mm(1”)
    ID   mm(in)40mm(1”)
    TANK CAPACITYCoolant TankGallon / litre55 gal. (200L)
    Lubricating Tankℓ(gel)
    POWER SUPPLYElectric Power SupplykVA26 kVA
    Thickness of Power CableSq
    VoltageV/Hz
    MACHINEDimensions
    (L×WxH)
    mm(in)163″ x 65″ x 73″ ( 4,132 x 1,630 x 1,875 mm )
    Weightkg(lb)10,120lbs. ( 4,600 Kg )
    NCControllerFANUC Oi-TC
  • Specifications

    DescriptionUnitGA-2800L
    CAPACITYMax. / Swing over saddlemm(in)580 mm (22.8″)
    Max. Turning Diametermm(in)351 mm (13.8″)
    Max. Turning Lengthmm(in)574 mm (22.6″)
    Bar Capacitymm(in)76 mm (3’)
    SPINDLEChuck Size(in)(10″)
    Hole through spindlemm(in)90mm (3.54”)
    Spindle Speed (rpm)rpm3,500 rpm
    Motor output ( cont. / 30 min.)Hp / kW15 / 20 HP (11 / 15 kW)
    Motor (Max/Cont.)kW(HP)
    Torque (Max/Cont.)N.m
    Spindle TypeDrive Belt drive
    Spindle NoseA2-8
    FEEDTravel (X/Z)mm(in)47.24″ + 1.18″ ( 1,200 mm + 30 mm )
    Rapid Travel (X/Z)m/min24m/min
    Slide TypeHardened & Ground Box Ways
    X-axis servo motorHP (KW)2.1 HP(1.6 kW)
    Z-axis servo motorHP (KW)4 HP (3.0 kW)
    BLOCK TOOLNo. of Tool / StationsT12
    Tool SizeOD mm(in)25mm(1”)
    ID   mm(in)40mm(1”)
    TANK CAPACITYCoolant TankGallon / litre55 gal. (200L)
    Lubricating Tankℓ(gel)
    POWER SUPPLYElectric Power SupplykVA26kVA
    Thickness of Power CableSq
    VoltageV/Hz
    MACHINEDimensions
    (L×WxH)
    mm(in)163″ x 65″ x 73″ ( 4,132 x 1,630 x 1,875 mm )
    Weightkg(lb)10,120lbs. ( 4,600 Kg )
    NCControllerFANUC Oi-TC
  • Specifications

    DescriptionUnitGA-2800C
    CAPACITYMax. / Swing over saddlemm(in)580 mm (22.8″)
    Max. Turning Diametermm(in)351 mm (13.8″)
    Max. Turning Lengthmm(in)259 mm (10.2″)
    Bar Capacitymm(in)76 mm (3’)
    SPINDLEChuck Size(in)(10″)
    Hole through spindlemm(in)90mm (3.54”)
    Spindle Speed (rpm)rpm3,500 rpm
    Motor output ( cont. / 30 min.)Hp / kW15 / 20 HP (11 / 15 kW)
    Motor (Max/Cont.)kW(HP)
    Torque (Max/Cont.)N.m
    Spindle TypeDrive Belt drive
    Spindle NoseA2-8
    FEEDTravel (X/Z)mm(in)205mm (8.07”) / 350mm (13.77”)
    Rapid Travel (X/Z)m/min20m/min
    Slide TypeHardened & Ground Box Ways
    X-axis servo motorHP (KW)2.1 HP(1.6 kW)
    Z-axis servo motorHP (KW)4 HP (3.0 kW)
    BLOCK TOOLNo. of Tool / StationsT12
    Tool SizeOD mm(in)25mm(1”)
    ID   mm(in)40mm(1”)
    TANK CAPACITYCoolant TankGallon / litre38 gal. (145L)
    Lubricating Tankℓ(gel)
    POWER SUPPLYElectric Power SupplykVA26kVA
    Thickness of Power CableSq
    VoltageV/Hz
    MACHINEDimensions
    (L×WxH)
    mm(in) 1,995 x 2,235 x 1,725 mm ( 78.5″ x 87.9″ x 67.9″ )
    Weightkg(lb)3,500kg (7,700lb)
    NCControllerFANUC Oi-TD
  • Specifications

    DescriptionUnitGA-2800CM
    CAPACITYMax. / Swing over saddlemm(in)579 mm (22.8″)
    Max. Turning Diametermm(in)351 mm (13.8″)
    Max. Turning Lengthmm(in)259 mm (10.2″)
    Bar Capacitymm(in)76 mm (3’)
    SPINDLEChuck Size(in)(10″)
    Hole through spindlemm(in)90mm (3.54”)
    Spindle Speed (rpm)rpm3,500 rpm
    Motor output ( cont. / 30 min.)Hp / kW11 / 15 kW ( 15 / 20 HP )
    Motor (Max/Cont.)kW(HP)
    Torque (Max/Cont.)N.m
    Spindle TypeDirect Belt Drive
    Spindle NoseA2-8
    FEEDTravel (X/Z)mm(in)165mm(6.50”) / 330mm (12.99”)
    Rapid Travel (X/Z)m/min24m/min
    Slide TypeHardened & Ground Box Ways
    X-axis servo motorHP (KW)2.1 HP(1.6 kW)
    Z-axis servo motorHP (KW)4 HP (3.0 kW)
    BLOCK TOOLNo. of Tool / StationsT12
    Tool SizeOD mm(in)25mm(1”)
    ID   mm(in)40mm(1”)
    TANK CAPACITYCoolant TankGallon / litre55 gal. (200L)
    Lubricating Tankℓ(gel)
    POWER SUPPLYElectric Power SupplykVA26 kVA
    Thickness of Power CableSq
    VoltageV/Hz
    MACHINEDimensions
    (L×WxH)
    mm(in)78″ x 92″ x 68″ ( 1,975 x 2,235 x 1,725 mm )
    Weightkg(lb)7,700 lbs. ( 3,500 Kg )
    NCControllerFANUC Oi-TC

SHOP BY MACHINE TYPE

FREE Appraisal


YesNo

Contact Us

Use this contact form to schedule an appointment, inquire products and services, and for all other inquiries