-
DESCRIPTION UNIT E160LMA Max Turning Dia inch 7.5″ Max Turning Length inch 17.7″ Chuck Size inch 6″ Driving Method – Belt Spindle RPM r/min 6,000 Spindle Output HP 15/20 Spindle Torque lbf.ft 38.7/70.4 Travel(X/Z) inch 6.5″/18.1″ Rapid Travel(X/Z) in/min 1181 / 1181 Slide Type – LM No. of Tools EA 12 Tool Size (ID/OD) inch 0.75″/1.25 Milling Tool Speed r/min 4,500 Specifications are subject to change without notice for quality improvement.
In case of any further information, please refer to the machine catalog. -
Specifications
Description Unit GS-2600YL CAPACITY Max. / Swing over saddle mm(in) 671 mm (26.4″) Max. Turning Diameter mm(in) 419 mm (16.5″) Max. Turning Length mm(in) 599 mm (23.6″) Bar Capacity mm(in) 64 mm (2.5’) SPINDLE Chuck Size (in) (10″) Hole through spindle mm(in) 76mm (2.99”) Spindle Speed (rpm) rpm 4,000 rpm Motor output ( cont. / 30 min.) Hp / kW 15 / 18.5 kW ( 20 / 25 HP ) Motor (Max/Cont.) kW(HP) Torque (Max/Cont.) N.m Spindle Type – Belt-drive Spindle Nose – A2-8 FEED Travel (X/Z) mm(in) 300mm(11.81”) / 780mm (30.69”) Rapid Travel (X/Z) m/min 30m/min Slide Type – Hardened & Ground Box Ways X-axis servo motor HP (KW) 3.6 HP(2.7 kW) Z-axis servo motor HP (KW) 6 HP (4.5 kW) BLOCK TOOL No. of Tool / Stations T 12 Tool Size OD mm(in) 25mm(1”) ID mm(in) 40mm(1”) TANK CAPACITY Coolant Tank Gallon / litre 80 gal. (300L) Lubricating Tank ℓ(gel) POWER SUPPLY Electric Power Supply kVA 40kVA Thickness of Power Cable Sq Voltage V/Hz MACHINE Dimensions
(L×WxH)mm(in) 3,550 × 2,120 × 2,260 ( 139.76″ x 83.46″ x 70.86″) Weight kg(lb) 6,500 kg (14,330 lb) NC Controller FANUC Oi-TD -
Specifications
Description Unit GS-2800YL CAPACITY Max. / Swing over saddle mm(in) 671 mm (26.4″) Max. Turning Diameter mm(in) 419 mm (16.5″) Max. Turning Length mm(in) 599 mm (23.6″) Bar Capacity mm(in) 76 mm (3’) SPINDLE Chuck Size (in) (10″) Hole through spindle mm(in) 90mm (3.54”) Spindle Speed (rpm) rpm 3,500 rpm Motor output ( cont. / 30 min.) Hp / kW 15 / 18.5 kW ( 20 / 25 HP ) Motor (Max/Cont.) kW(HP) Torque (Max/Cont.) N.m Spindle Type – Belt-drive Spindle Nose – A2-8 FEED Travel (X/Z) mm(in) 300mm(11.81”) / 780mm (30.69”) Rapid Travel (X/Z) m/min 30m/min Slide Type – Hardened & Ground Box Ways X-axis servo motor HP (KW) 3.6 HP(2.7 kW) Z-axis servo motor HP (KW) 6 HP (4.5 kW) BLOCK TOOL No. of Tool / Stations T 12 Tool Size OD mm(in) 25mm(1”) ID mm(in) 40mm(1”) TANK CAPACITY Coolant Tank Gallon / litre 95 gal. (360L) Lubricating Tank ℓ(gel) POWER SUPPLY Electric Power Supply kVA 40kVA Thickness of Power Cable Sq Voltage V/Hz MACHINE Dimensions
(L×WxH)mm(in) 4,520 × 2,200 × 2,260 mm (177.95″ x 86.61″ x 88.97″ ) Weight kg(lb) 8,500 kg (18,735lb) NC Controller FANUC Oi-TD -
Specifications
Description Unit GS-2600ML CAPACITY Max. / Swing over saddle mm(in) 671 mm (26.4″) Max. Turning Diameter mm(in) 419 mm (16.5″) Max. Turning Length mm(in) 599 mm (23.6″) Bar Capacity mm(in) 64 mm (2.5’) SPINDLE Chuck Size (in) (10″) Hole through spindle mm(in) 76mm (2.99”) Spindle Speed (rpm) rpm 4,000 rpm Motor output ( cont. / 30 min.) Hp / kW 15 / 18.5 kW ( 20 / 25 HP ) Motor (Max/Cont.) kW(HP) Torque (Max/Cont.) N.m Spindle Type – Belt-drive Spindle Nose – A2-8 FEED Travel (X/Z) mm(in) 300mm(11.81”) / 780mm (30.69”) Rapid Travel (X/Z) m/min 30m/min Slide Type – Hardened & Ground Box Ways X-axis servo motor HP (KW) 3.6 HP(2.7 kW) Z-axis servo motor HP (KW) 6 HP (4.5 kW) BLOCK TOOL No. of Tool / Stations T 12 Tool Size OD mm(in) 25mm(1”) ID mm(in) 40mm(1”) TANK CAPACITY Coolant Tank Gallon / litre 80 gal. (300L) Lubricating Tank ℓ(gel) POWER SUPPLY Electric Power Supply kVA 40kVA Thickness of Power Cable Sq Voltage V/Hz MACHINE Dimensions
(L×WxH)mm(in) 3,550 × 2,120 × 1,800 ( 139.76″ x 83.46″ x 70.86″) Weight kg(lb) 6,500 kg (14,330lb) NC Controller FANUC Oi-TD -
Specifications
Description Unit GS-280ML CAPACITY Max. / Swing over saddle mm(in) 671 mm (26.4″) Max. Turning Diameter mm(in) 419 mm (16.5″) Max. Turning Length mm(in) 599 mm (23.6″) Bar Capacity mm(in) 76 mm (3’) SPINDLE Chuck Size (in) (10″) Hole through spindle mm(in) 90mm (3.54”) Spindle Speed (rpm) rpm 3,500 rpm Motor output ( cont. / 30 min.) Hp / kW 11 / 18.5 kW ( 15 / 25 HP ) Motor (Max/Cont.) kW(HP) Torque (Max/Cont.) N.m Spindle Type – Direct Belt Drive Spindle Nose – A2-8 FEED Travel (X/Z) mm(in) 30mm(1.81”) / 570mm (22.44”) Rapid Travel (X/Z) m/min 24m/min Slide Type – Hardened & Ground Box Ways X-axis servo motor HP (KW) 2.2 HP(1.6 kW) Z-axis servo motor HP (KW) 4.1 HP (3.0 kW) BLOCK TOOL No. of Tool / Stations T 12 Tool Size OD mm(in) 25mm(1”) ID mm(in) 40mm(1”) TANK CAPACITY Coolant Tank Gallon / litre 52.5 gal. (200L) Lubricating Tank ℓ(gel) POWER SUPPLY Electric Power Supply kVA 26 kVA Thickness of Power Cable Sq Voltage V/Hz MACHINE Dimensions
(L×WxH)mm(in) 2,670 / 3,500 x 1,955 x 1,890 mm ( 106″ / 138″ x 77″ x 75″ ) Weight kg(lb) 5,600 Kg (12,320 lb. ) NC Controller FANUC Oi-TC -
Specifications
Description Unit GS-2800M CAPACITY Max. / Swing over saddle mm(in) 630 mm (24.8″) Max. Turning Diameter mm(in) 399 mm (15.7″) Max. Turning Length mm(in) 594 mm (23.4″) Bar Capacity mm(in) 76 mm (2.95’) SPINDLE Chuck Size (in) (10″) Hole through spindle mm(in) 90mm (3.54”) Spindle Speed (rpm) rpm 3,500 rpm Motor output ( cont. / 30 min.) Hp / kW 15 / 18.5 kW ( 20 / 25 HP ) Motor (Max/Cont.) kW(HP) Torque (Max/Cont.) N.m Spindle Type – Belt-Drive Spindle Nose – A2-8 FEED Travel (X/Z) mm(in) 30mm(1.81”) / 570mm (22.44”) Rapid Travel (X/Z) m/min 30m/min Slide Type – Hardened & Ground Box Ways X-axis servo motor HP (KW) 2.7 HP(3.6 kW) Z-axis servo motor HP (KW) 4.5 HP (6.0 kW) BLOCK TOOL No. of Tool / Stations T 12 Tool Size OD mm(in) 25mm(1”) ID mm(in) 40mm(1”) TANK CAPACITY Coolant Tank Gallon / litre 95 gal. (360L) Lubricating Tank ℓ(gel) POWER SUPPLY Electric Power Supply kVA 40 kVA Thickness of Power Cable Sq Voltage V/Hz MACHINE Dimensions
(L×WxH)mm(in) 4,520 × 2,200 × 1,870 mm (177.95″ x 86.61″ x 73.62”) Weight kg(lb) 8,500 Kg (18,735 lb. ) NC Controller FANUC Oi-TD -
Specifications
Description Unit GA-2600CM CAPACITY Max. / Swing over saddle mm(in) 579 mm (22.8″) Max. Turning Diameter mm(in) 351 mm (13.8″) Max. Turning Length mm(in) 292 mm (11.5″) Bar Capacity mm(in) 64 mm (2.5’) SPINDLE Chuck Size (in) (10″) Hole through spindle mm(in) 76mm (2.99”) Spindle Speed (rpm) rpm 4,000 rpm Motor output ( cont. / 30 min.) Hp / kW 11 / 15 kW ( 15 / 20 HP ) Motor (Max/Cont.) kW(HP) Torque (Max/Cont.) N.m Spindle Type – Direct Belt Drive Spindle Nose – A2-8 FEED Travel (X/Z) mm(in) 165mm(6.50”) / 330mm (12.99”) Rapid Travel (X/Z) m/min 24m/min Slide Type – Hardened & Ground Box Ways X-axis servo motor HP (KW) 2.1 HP(1.6 kW) Z-axis servo motor HP (KW) 4 HP (3.0 kW) BLOCK TOOL No. of Tool / Stations T 12 Tool Size OD mm(in) 25mm(1”) ID mm(in) 40mm(1”) TANK CAPACITY Coolant Tank Gallon / litre 55 gal. (200L) Lubricating Tank ℓ(gel) POWER SUPPLY Electric Power Supply kVA 26 kVA Thickness of Power Cable Sq Voltage V/Hz MACHINE Dimensions
(L×WxH)mm(in) 78″ x 92″ x 68″ ( 1,975 x 2,235 x 1,725 mm ) Weight kg(lb) 7,700 lbs. ( 3,500 Kg ) NC Controller FANUC Oi-TC -
Specifications
Description Unit GA-2600ML CAPACITY Max. / Swing over saddle mm(in) 579 mm (22.8″) Max. Turning Diameter mm(in) 351 mm (13.8″) Max. Turning Length mm(in) 584 mm (23″) Bar Capacity mm(in) 64 mm (2.5’) SPINDLE Chuck Size (in) (10″) Hole through spindle mm(in) 76mm (2.99”) Spindle Speed (rpm) rpm 4,000 rpm Motor output ( cont. / 30 min.) Hp / kW 11 / 15 kW ( 15 / 20 HP ) Motor (Max/Cont.) kW(HP) Torque (Max/Cont.) N.m Spindle Type – Direct Belt Drive Spindle Nose – A2-8 FEED Travel (X/Z) mm(in) 165mm(6.50”) / 330mm (12.99”) Rapid Travel (X/Z) m/min 24m/min Slide Type – Hardened & Ground Box Ways X-axis servo motor HP (KW) 2.1 HP(1.6 kW) Z-axis servo motor HP (KW) 4 HP (3.0 kW) BLOCK TOOL No. of Tool / Stations T 12 Tool Size OD mm(in) 25mm(1”) ID mm(in) 40mm(1”) TANK CAPACITY Coolant Tank Gallon / litre 55 gal. (200L) Lubricating Tank ℓ(gel) POWER SUPPLY Electric Power Supply kVA 26 kVA Thickness of Power Cable Sq Voltage V/Hz MACHINE Dimensions
(L×WxH)mm(in) 163″ x 65″ x 73″ ( 4,132 x 1,630 x 1,875 mm ) Weight kg(lb) 10,120lbs. ( 4,600 Kg ) NC Controller FANUC Oi-TC -
Specifications
Description Unit GA-2800CM CAPACITY Max. / Swing over saddle mm(in) 579 mm (22.8″) Max. Turning Diameter mm(in) 351 mm (13.8″) Max. Turning Length mm(in) 259 mm (10.2″) Bar Capacity mm(in) 76 mm (3’) SPINDLE Chuck Size (in) (10″) Hole through spindle mm(in) 90mm (3.54”) Spindle Speed (rpm) rpm 3,500 rpm Motor output ( cont. / 30 min.) Hp / kW 11 / 15 kW ( 15 / 20 HP ) Motor (Max/Cont.) kW(HP) Torque (Max/Cont.) N.m Spindle Type – Direct Belt Drive Spindle Nose – A2-8 FEED Travel (X/Z) mm(in) 165mm(6.50”) / 330mm (12.99”) Rapid Travel (X/Z) m/min 24m/min Slide Type – Hardened & Ground Box Ways X-axis servo motor HP (KW) 2.1 HP(1.6 kW) Z-axis servo motor HP (KW) 4 HP (3.0 kW) BLOCK TOOL No. of Tool / Stations T 12 Tool Size OD mm(in) 25mm(1”) ID mm(in) 40mm(1”) TANK CAPACITY Coolant Tank Gallon / litre 55 gal. (200L) Lubricating Tank ℓ(gel) POWER SUPPLY Electric Power Supply kVA 26 kVA Thickness of Power Cable Sq Voltage V/Hz MACHINE Dimensions
(L×WxH)mm(in) 78″ x 92″ x 68″ ( 1,975 x 2,235 x 1,725 mm ) Weight kg(lb) 7,700 lbs. ( 3,500 Kg ) NC Controller FANUC Oi-TC -
Specifications
Description Unit GA-2800ML CAPACITY Max. / Swing over saddle mm(in) 579 mm (22.8″) Max. Turning Diameter mm(in) 351 mm (13.8″) Max. Turning Length mm(in) 574 mm (22.6″) Bar Capacity mm(in) 76 mm (3’) SPINDLE Chuck Size (in) (10″) Hole through spindle mm(in) 90mm (3.54”) Spindle Speed (rpm) rpm 3,500 rpm Motor output ( cont. / 30 min.) Hp / kW 11 / 15 kW ( 15 / 20 HP ) Motor (Max/Cont.) kW(HP) Torque (Max/Cont.) N.m Spindle Type – Direct Belt Drive Spindle Nose – A2-8 FEED Travel (X/Z) mm(in) 165mm(6.50”) / 330mm (12.99”) Rapid Travel (X/Z) m/min 24m/min Slide Type – Hardened & Ground Box Ways X-axis servo motor HP (KW) 2.1 HP(1.6 kW) Z-axis servo motor HP (KW) 4 HP (3.0 kW) BLOCK TOOL No. of Tool / Stations T 12 Tool Size OD mm(in) 25mm(1”) ID mm(in) 40mm(1”) TANK CAPACITY Coolant Tank Gallon / litre 55 gal. (200L) Lubricating Tank ℓ(gel) POWER SUPPLY Electric Power Supply kVA 26 kVA Thickness of Power Cable Sq Voltage V/Hz MACHINE Dimensions
(L×WxH)mm(in) 163″ x 65″ x 73″ ( 4,132 x 1,630 x 1,875 mm ) Weight kg(lb) 10,120lbs. ( 4,600 Kg ) NC Controller FANUC Oi-TC -
Specifications
Description Unit GA-3000ML CAPACITY Max. / Swing over saddle mm(in) 599 mm (23.6″) Max. Turning Diameter mm(in) 500 mm (19.7″) Max. Turning Length mm(in) 630 mm (24.8″) Bar Capacity mm(in) 76 mm (3’) SPINDLE Chuck Size (in) (10″) Hole through spindle mm(in) 90mm (3.54”) Spindle Speed (rpm) rpm 3,000 rpm Motor output ( cont. / 30 min.) Hp / kW 18.5 / 22 kW ( 25 / 30 HP ) Motor (Max/Cont.) kW(HP) Torque (Max/Cont.) N.m Spindle Type – Direct Belt Drive Spindle Nose – A2-8 FEED Travel (X/Z) mm(in) 260 mm(10.23”) / 630mm (24.80”) Rapid Travel (X/Z) m/min 24m/min Slide Type – Hardened & Ground Box Ways X-axis servo motor HP (KW) 4 HP(2.7 kW) Z-axis servo motor HP (KW) 6 HP (4.5 kW) BLOCK TOOL No. of Tool / Stations T 12 Tool Size OD mm(in) 25mm(1”) ID mm(in) 40mm(1”) TANK CAPACITY Coolant Tank Gallon / litre 38 gal. (145L) Lubricating Tank ℓ(gel) POWER SUPPLY Electric Power Supply kVA 38 kVA Thickness of Power Cable Sq Voltage V/Hz MACHINE Dimensions
(L×WxH)mm(in) 2,845 x 1,965 x 1,910 ( 112.0″ x 77.4″ x 75.1″) Weight kg(lb) 5,800 kg ( 12,760 lb ) NC Controller FANUC Oi-TD -
Specifications
Description Unit GS-3300Y CAPACITY Max. / Swing over saddle mm(in) 671 mm (26.4″) Max. Turning Diameter mm(in) 460 mm (18.1″) Max. Turning Length mm(in) 749 mm (29.5″) Bar Capacity mm(in) 89 mm (3.5’) SPINDLE Chuck Size (in) (12″) Hole through spindle mm(in) 101mm (3.97”) Spindle Speed (rpm) rpm 3,000 rpm Motor output ( cont. / 30 min.) Hp / kW 18.5 / 22 kW ( 25 / 30 HP ) Motor (Max/Cont.) kW(HP) Torque (Max/Cont.) N.m Spindle Type – Belt-Drive Spindle Nose – A2-8 FEED Travel (X/Z) mm(in) 300 mm(11.81”) / 780mm (30.69”) Rapid Travel (X/Z) m/min 30m/min Slide Type – Hardened & Ground Box Ways X-axis servo motor HP (KW) 3.6 HP(2.7 kW) Z-axis servo motor HP (KW) 6 HP (4.5 kW) BLOCK TOOL No. of Tool / Stations T 12 Tool Size OD mm(in) 25mm(1”) ID mm(in) 40mm(1”) TANK CAPACITY Coolant Tank Gallon / litre 80 gal. (300L) Lubricating Tank ℓ(gel) POWER SUPPLY Electric Power Supply kVA 40 kVA Thickness of Power Cable Sq Voltage V/Hz MACHINE Dimensions
(L×WxH)mm(in) 3,550 × 2,120 × 2,260 ( 139.76″ x 83.46″ x 88.97″) Weight kg(lb) 6,500 kg ( 14,330 lb ) NC Controller FANUC Oi-TD
Live Tooling CNC Lathe
Live tooling is a feature in CNC Lathe machines that turns the tools like a milling machine. For instance, a machine shop can produce a part with a hole drilled perpendicular to the main axis (the axis of rotation of the spindles) is very economical with live tooling compared to a lathe machine without live tooling. You may also check out Live Tooling with Sub-Spindle.
Find CNC Lathe Machines with live tooling: Below is a list of brand new Live Tooling CNC machines sold in Canada. Purchasing new cnc machines may take a few months to manufacture. For custom shop cnc machine requirements, please contact us at 1-866-437-7315