-
Specifications
Description Unit LV500R/L LV500RM/LM Max Turning Dia in 21.65 21.65 Max Turning Length in 23.62 23.62 Chuck Size in 15″ 15″ Driving Method – Belt Belt Spindle RPM r/min 2,000 2,000 Spindle Output kW 18.5/22 18.5/22 Spindle Torque N.m 693/824 693/824 Travel(X/Z) in 12.8/24.6 12.8/24.6 Rapid Travel(X/Z) in/min 787/708 787/708 Slide Type – LM LM No. of Tools EA 8[12] 8[12] Tool Size mm 32/50 32/50 Milling Tool Speed r/min – 3,000 Specifications are subject to change without notice for quality improvement.
In case of any further information, please refer to the machine catalog. -
Specifications
Description Unit LV800R/L LV800RM/LM Max Turning Dia in 31.5 31.5 Max Turning Length in 31.5 31.5 Chuck Size in 18″ 18″ Driving Method – Belt Belt Spindle RPM r/min 2,000 2,000 Spindle Output kW 22/30 22/30 Spindle Torque N.m 1,188/1,619 1,188/1,619 Travel(X/Z) in 17.32/31.5 17.32/31.5 Rapid Travel(X/Z) in/min 787/787 787/787 Slide Type – BOX BOX No. of Tools EA 12 12 Tool Size mm 32/63 32/63 Milling Tool Speed r/min – 3,000 Specifications are subject to change without notice for quality improvement.
In case of any further information, please refer to the machine catalog. -
Specifications
Description Unit LV500R/L LV500RM/LM Max Turning Dia in 21.65 21.65 Max Turning Length in 23.62 23.62 Chuck Size in 15″ 15″ Driving Method – Belt Belt Spindle RPM r/min 2,000 2,000 Spindle Output kW 18.5/22 18.5/22 Spindle Torque N.m 693/824 693/824 Travel(X/Z) in 12.8/24.6 12.8/24.6 Rapid Travel(X/Z) in/min 787/708 787/708 Slide Type – LM LM No. of Tools EA 8[12] 8[12] Tool Size mm 32/50 32/50 Milling Tool Speed r/min – 3,000 Specifications are subject to change without notice for quality improvement.
In case of any further information, please refer to the machine catalog. -
Specifications
Description Unit LV450R/L LV450RM/LM Max Turning Dia in 18.3 18.3 Max Turning Length in 18.3 18.3 Chuck Size in 12″ 12″ Driving Method – Belt Belt Spindle RPM r/min 3,000 3,000 Spindle Output kW 18.5/22 18.5/22 Spindle Torque N.m 614/730 614/730 Travel(X/Z) in 12.2/19.5 12.2/19.5 Rapid Travel(X/Z) in/min 787/945 787/945 Slide Type – LM LM No. of Tools EA 12 12 Tool Size mm 25/50 25/50 Milling Tool Speed r/min – 4,000 Specifications are subject to change without notice for quality improvement.
In case of any further information, please refer to the machine catalog. -
Specifications
Description Unit LV450R/L LV450RM/LM Max Turning Dia in 18.3 18.3 Max Turning Length in 18.3 18.3 Chuck Size in 12″ 12″ Driving Method – Belt Belt Spindle RPM r/min 3,000 3,000 Spindle Output kW 18.5/22 18.5/22 Spindle Torque N.m 614/730 614/730 Travel(X/Z) in 12.2/19.5 12.2/19.5 Rapid Travel(X/Z) in/min 787/945 787/945 Slide Type – LM LM No. of Tools EA 12 12 Tool Size mm 25/50 25/50 Milling Tool Speed r/min – 4,000 Specifications are subject to change without notice for quality improvement.
In case of any further information, please refer to the machine catalog. -
Specifications
Model B1250SLY Maximum bar capacity 3.74” Maximum machining diameter 21.73” Maximum machining length 46” Maximum swing over diameter (bench) 26.7” MAIN SPINDLE Spindle Bore 3.74” Spindle speed range 3,000 RPM Geared headstock 1:1 and 4:1 Spindle motor 40 HP Motor type Wide range Spindle nose ASA A2-8 Y axis stroke 5.5” TURRET Turret indexing time 1 station 0.3 sec/pos Turret indexing type Bi-directional Number of stations 16 SUB- SPINDLE Bar capacity 2.55” Spindle bore 2.99” Spindle speed range (infinitely variable) 4,000 RPM* Spindle drive motor (variable speed) 54HP Spindle nose 6” Flat Nose Slide movement (B-axis) NC control Slide stroke (B-axis) 44.68” Rapid traverse rate (B-axis) 590.5 IPM Spindle positioning programmable M16 to .001 deg. REVOLVING TOOL ATTACHMENT TURRET Number of positions 16 Drive motor-max. rating (Fanuc) 23 HP Speed range 6,000 RPM Engagement time immediate C AXIS CONTROL WITH SPINDLE POSITIONING Spindles Main Spindle positioning Full “C” Minimum command increment 0.001 degree Positioning system Spindle motor Degree of movement Programmable Rapid speed rate 100 RPM GENERAL INFORMATION Voltage required 400 volt AC, 3-phase Air required 80 psi @ 4 CFM MACHINING DIMENSIONS Width 87.4” Height 92.52” Length with chip conveyor 218” Machine weight with chip conveyor 18,519 lbs. ACCURACY Z axis repeatability accuracy +/-.00004” X axis positioning accuracy +/-.00006” C axis positioning accuracy +/-.00005° C axis repeatability +/-.00001° -
Specifications
Model B750SLY Maximum bar capacity 4.02” Maximum machining diameter 18.4” Maximum machining length 29.5” Maximum swing over diameter (bench) 26.7” MAIN SPINDLE Spindle Bore 4.3” Spindle speed range 3,000 RPM Spindle motor 40 HP Motor type Wide range Spindle nose ASA A2-8 Y-axis stroke 5.5” SUB- SPINDLE Bar capacity 1.77” Spindle bore 2.15”
Spindle speed range (infinitely variable) 5,000 RPM*
Spindle drive motor (variable speed) max rating 33HP Spindle nose 5” Flat Nose Slide movement (B-axis) NC control Slide stroke (B-axis) 35”
Rapid traverse rate (B-axis) 945 IPM
Spindle positioning programmable M16 to .001 deg TURRET Turret indexing time 1 station 0.3 sec/pos. (1-station) Turret indexing type Bi-directional Number of stations
16 REVOLVING TOOL ATTACHMENT TURRET Number of positions 16 Drive motor – max. rating (Fanuc) 23 HP
Speed range (infinitely variable) 6,000 RPM Engagement time immediate
C-AXIS CONTROL W/ SPINDLE POSITIONING Spindles Main and Sub Spindle positioning Full “C” Minimum command increment 0.001 degree Positioning system Spindle motor Degree of movement Programmable Rapid speed rate 100 RPM GENERAL INFORMATION Voltage required 400 volt AC, 3-phase Air required 80 psi @ 4 CFM Amperage Draw 75 Amp. MACHINING DIMENSIONS Width 80” Height 88” Length with chip conveyor 200” Machine weight with chip conveyor 16,755 lbs. ACCURACY Z axis repeatability accuracy +/-.00004” X axis positioning accuracy +/-.00006” C axis positioning accuracy +/-.00005° C axis repeatability +/-.00001° NOTE: Horsepower given are the 30 min. ratings.
* Chuck RPM limitations may apply.
-
Specifications
Model B750SL Maximum bar capacity 3.22” Maximum machining diameter 18.4” Maximum machining length 29.5” Maximum swing over diameter (bench) 26.7” MAIN SPINDLE Spindle Bore 4.17” Spindle speed range 3,000 RPM Spindle motor 40 HP Motor type Wide range Spindle nose ASA A2-8 SUB- SPINDLE Bar capacity 1.77” Spindle bore 2.15”
Spindle speed range (infinitely variable) 5,000 RPM*
Spindle drive motor (variable speed) max rating 33HP Spindle nose 5” Flat Nose Slide movement (B-axis) NC control Slide stroke (B-axis) 35”
Rapid traverse rate (B-axis) 945 IPM
Spindle positioning programmable M16 to .001 deg TURRET Turret indexing time 1 station 0.3 sec/pos. (1-station) Turret indexing type Bi-directional Number of stations
16 REVOLVING TOOL ATTACHMENT TURRET Number of positions 16 Drive motor – max. rating (Fanuc) 23 HP
Speed range (infinitely variable) 6,000 RPM Engagement time immediate
C-AXIS CONTROL W/ SPINDLE POSITIONING Spindles Main and Sub Spindle positioning Full “C” Minimum command increment 0.001 degree Positioning system Spindle motor Degree of movement Programmable Rapid speed rate 100 RPM GENERAL INFORMATION Voltage required 400 volt AC, 3-phase Air required 80 psi @ 4 CFM Amperage Draw 75 Amp. MACHINING DIMENSIONS Width 80” Height 88” Length with chip conveyor 200” Machine weight with chip conveyor 16,755 lbs. ACCURACY Z axis repeatability accuracy +/-.00004” X axis positioning accuracy +/-.00006” C axis positioning accuracy +/-.00005° C axis repeatability +/-.00001° -
Specifications
Model B1250LY Maximum bar capacity 3.74” Maximum machining diameter 21.73” Maximum machining length 46” Maximum swing over diameter (bench) 26.7” MAIN SPINDLE Spindle Bore 3.74” Spindle speed range 3,000 RPM Geared headstock 1:1 and 4:1 Spindle motor 40 HP Motor type Wide range Spindle nose ASA A2-8 Y axis stroke 5.5” TURRET Turret indexing time 1 station 0.3 sec/pos Turret indexing type Bi-directional Number of stations 16 TAILSTOCK Positioning travel 44.88” Quill Stroke 3.93” Quill diameter 3.34” Cylinder area sq. in 17.23 Max Thrust 2,645.5lbs Flange for live center MT5 REVOLVING TOOL ATTACHMENT TURRET Number of positions 16 Drive motor-max. rating (Fanuc) 23 HP Speed range 6,000 RPM Engagement time immediate C AXIS CONTROL WITH SPINDLE POSITIONING Spindles Main Spindle positioning Full “C” Minimum command increment 0.001 degree Positioning system Spindle motor Degree of movement Programmable Rapid speed rate 100 RPM GENERAL INFORMATION Voltage required 400 volt AC, 3-phase Air required 80 psi @ 4 CFM MACHINING DIMENSIONS Width 87.4” Height 92.52” Length with chip conveyor 218” Machine weight with chip conveyor 18,519 lbs. ACCURACY Z axis repeatability accuracy +/-.00004” X axis positioning accuracy +/-.00006” C axis positioning accuracy +/-.00005° C axis repeatability +/-.00001° -
Specifications
Model B1250L Maximum bar capacity 3.74” Maximum machining diameter 17.8” Maximum machining length 46” Maximum swing over diameter (bench) 26.7” MAIN SPINDLE Spindle Bore 3.74” Spindle speed range 3,000 RPM Geared headstock 1:1 and 4:1 Spindle motor 51 HP Motor type Wide range Spindle nose ASA A2-8 TURRET Turret indexing time 1 station 0.3 sec/pos Turret indexing type Bi-directional Number of stations 16 TAILSTOCK Positioning travel 51.2” Quill Stroke 6” Quill diameter 4.5” Cylinder area sq. in 17.23 Max Thrust 2,645.5lbs Flange for live center MT5 REVOLVING TOOL ATTACHMENT TURRET Number of positions 16 Drive motor-max. rating (Fanuc) 23 HP Speed range 6,000 RPM Engagement time immediate C AXIS CONTROL WITH SPINDLE POSITIONING Spindles Main Spindle positioning Full “C” Minimum command increment 0.001 degree Positioning system Spindle motor Degree of movement Programmable Rapid speed rate 100 RPM GENERAL INFORMATION Voltage required 400 volt AC, 3-phase Air required 80 psi @ 4 CFM MACHINING DIMENSIONS Width 86.2” Height 87.5” Length with chip conveyor 218” Machine weight with chip conveyor 18,519 lbs. ACCURACY Z axis repeatability accuracy +/-.00004” X axis positioning accuracy +/-.00006” C axis positioning accuracy +/-.00005° C axis repeatability +/-.00001° -
Specifications
Model B750LY Maximum bar capacity 3.75” Maximum machining diameter 18.4” Maximum machining length 29.5” Maximum swing over diameter (bench) 26.7” MAIN SPINDLE Spindle Bore 4.17” Spindle speed range 3,000 RPM Spindle motor 53 HP Motor type Wide range Spindle nose ASA A2-8 Y-axis stroke 5.5”
TURRET Turret indexing time 1 station 0.3 sec/pos. (1-station) Turret indexing type Bi-directional Number of stations 16 REVOLVING TOOL ATTACHMENT TURRET Number of positions 16 Drive motor – max. rating (Fanuc) 23 HP Speed range (infinitely variable) 6,000 RPM Engagement time immediate C-AXIS CONTROL W/ SPINDLE POSITIONING Spindles Main Spindle positioning Full “C” Minimum command increment 0.001 degree Positioning system Spindle motor Degree of movement Programmable Rapid speed rate 100 RPM GENERAL INFORMATION Voltage required 400 volt AC, 3-phase Air required 80 psi @ 4 CFM Amperage Draw 75 Amp. MACHINING DIMENSIONS Width 80” Height 87.5” Length with chip conveyor 157.5” Machine weight with chip conveyor 16,755 lbs. ACCURACY Z axis repeatability accuracy +/-.00004” X axis positioning accuracy +/-.00006” C axis positioning accuracy +/-.00005° C axis repeatability +/-.00001°
product
Available Option(s):
Available in USA
5 Axis
Available in Canada
Boring Mills
Bridge Mills
Coordinate Measuring Machines
Flat Bed Turning Machines
Horizontal Machining Centers
Multi-Axis Turning Centers
Swiss Lathes
Vertical Drill Tap Centers
Vertical Machine Centers
Vertical Turning Centers
USED MACHINERY FOR SALE in Canada
Uncategorized
Horizontal Turning Centers