-
Hyundai Kia VX 950M SN G3690-0080 MFG date 2008 Controller Fanuc 18IMB Travel X,Y,Z 96.5″x37.4″x33..5″ Table 106″x37″ Max table weight 9,921 lbs Spindle nose to table 7.1″ to 41.3″ Spindle taper CAT 50 Spindle speed 8,000 rpm Horsepower 30 HP Gear box 2 gear Ranges Torque at 30 minutes / continuous 812 / 579ft-lbs Ways Boxed Rapid traverse Z axis 787 Imp Rapid traverse X/Y axis 630 Imp Tool magazine (Dual arm) 30 tool Max tool diameter (With out adjacent tool) 4.9″ ( 9.4 ) Max tool weight 44.1 lbs Tool to Tool time 3.5 sec Weight 61,809 lbs Coolant wash down system Rear chip auger Work light Optional equipment Thru Spindle Coolant 430 PSI 2 Spiral Conveyors Inside the machine Chip conveyor Lift up (included) MODULE, (FROM 32MB, SRAM 3MB) included UPGRADE PART PROG STORAGE 2560 M included Stock Lamarche Warehouse Edmonton Lamarche will load (rig) and prep machine for shipping Purchaser responsible for Transport, rigging, and placement of machine. Installation, Training, Commissioning Lamarche Service (Pending on Location) $80,000.00$80,000.00 -
Used L 400C Horizontal Lathe Year 2011 CNC controller Fanuc 21i TC Std Swing 30.7″ Std Maximum Cutting Diameter 24.8″ Std Maximum Workpiece Length 46.1″ Std Travel X axis 12.8″ Std Travel Z axis 47.4″ Std Guide Ways Boxed on X Linear For Z Boxed Std Spindle A2 – 11 Std Max Bar Work Diameter 4.61″ Std Max RPM 2,000 Std Rapid Traverse X axis 787 ipm Std Rapid Traverse Z axis 944 ipm Std Turret 10 Tools Std Tool Size (Square Shank) 1.25″x1.25″ Std Tool Size (Round shank) 2″ Std Index Time (1 station/1 full rev) .2 sec Std Chuck 15″ Std Tail Stock Quill Diameter 3.94″ Std Tail Stock Quill Travel (Programmable) 5.1″ Std Tail Stock Body Travel 43.3″ Std Tail Stock Quill Internal Taper MT #4 – Built In Type Std Gear Box 2 Std Horsepower 35 HP Std Torque 1345 Ft lbs Std Weight 18,739 lbs Std Bed 45 deg Std Standard Tooling Package Std Quick Setter Touch Std Optional Equipment Chip Conveyor Hinge Right Total $ – Accepted By: Purchase Order No: Steady Rest Option Used SLU 4 Programmable Steady Rest ( 1.18 to 9.65″ ) Manual clamp base INC Auto Lube INC -
“Special Featured Machine” Discounted Pricing!
ROMI C 830 Combination Lathe Version 6.0 Romi C 830×120″ASA A2-15 Spindle nose, 260mm (10.2) Thru Spindle 120″Bed length • Siemens 828D with LCD 10.4″ color monitor and control Swing over Bed 33.46 Swing over cross slide 21.65 Distance between centers 118.11 Width of bed 18.11 Spindle nose A2-15 Spindle Bore 10.2 Spindle Speed (RPM) 775 X Axis (cross travel) 20.47 Z axis (Longitudinal travel ) 118.9 X axis rapid traverse Feed rate 319/ipm Z axis rapid traverse Feed Rate 315/ipm Main motor 45 HP Tail Stock Quil diameter Tailstock 5.12 Quill travel Tailstock 7.87 Quill Taper Tailstock MT5 Length 296 Width 126 N.W. (kg / lbs) 10,250 (22,600) Machine Accessories- C/w Machine X55916 Coolant pump (10 lpm @ 7bar, 1.5kw / 2cv) (#3) Tailstock with manually operated quill with built-in bearing and MT-5 quill taper hole SE10043 Deep Hole Drill/Support Boring Bar Saddle Steady rest U type, Ø 100 to 440mm capacity (no rollers included) (#5) Set of rollers for 100 to 305mm (4 to 12″) Ø capacity 2443-2A15EX 24″ 4-Jaw Extra Heavy Dty Oil Country Steel Body A2-15 11″ thru hole Rear Centralizing Ring W/ 10.2″ Hole ASA A2-15 -
JUST ARRIVED- HYUNDAI WIA L300LC TURNING CENTER
Built 2015 installed 2016 Hyundai WIA L300LC Manual Guide I Controller Fanuc 0i-TD 10.4″ Swing 29.5″ Maximum Cutting Diameter 22″ Maximum Workpiece Length 52″ Travel X Axis 14″ Travel Z Axis 53.1″ Ways Boxed Spindle A2 – 8 Max Bar Work Diameter 3.54″ Spindle Bore 4.02″ Max RPM 3,000 rpm Rapid Traverse X Axis 787 ipm Rapid Traverse Z Axis 945 ipm Turret 12 Tools Tool Size (Square Shank) 1″ sq Tool Size (Round Shank) 2″ Index Time – Tool to Next Tool .3 sec Chuck ( Samwoo Kitagawa ) 12″ Horsepower 35 HP Geared Head 2 Step Geared Torque 810 Ft-lbs Work Light Yes Weight 16,755 lbs Bed 45 deg Coolant System 43 psi Tool Setter Yes Tailstock Quill Diameter 3.9″ Tailstock Quill Travel (Programmable) 4.7″ Tailstock Body Travel using Turret auto clap 53.1″ Tailstock Quill Internal Taper MT #5 Optional Equipment Chip Conveyor C/C(Right-Side Hinged) -
Hyundai SKT460 Horizontal Lathe 2007 – Sn#SKT4600227 Controller Fanuc 32i-A Std Power ON 24 350 hours Operating 9049 hours Cutting 7705 hours Swing 34.4″ Std Maximum Cutting Diameter 26″ Std Maximum Workpiece Length 62″ Std Travel X Axis 14.6″ Std Travel Z Axis 62″ Std Guide ways Boxed Std Spindle A2 – 11 Std Max Bar Work Diameter 4.61″ Std Max RPM 2,000 rpm Std Rapid Traverse X Axis 591 ipm Std Rapid Traverse Z Axis 787 ipm Std Turret 12 tool Std Tool Size (Square Shank) 1.25″ sq Std Tool Size (Round Shank) 2.5″ Std Index Time – Tool to Next Tool .7 sec Std Chuck 18″ Std Tailstock Quill & Body Travel Programmable Std Tailstock Quill Diameter 5.9″ Std Tailstock Quill Travel 6.7″ Std Tailstock Body Travel 50.4″ Std Tailstock Quill Internal Taper MT #6 Std Horsepower 50 Hp Std Torque 2,044 ft lbs Std Work Light Std Weight 26,455 lbs Std Bed 45 deg Std Q-Setter – Marposs Touch Std Automatic Tool Setter Std Coolant System Std Standard Tooling Package Std Optional Equipment Chip Conveyor Hinge Right With Coolant Cover (31684700710) Included $70,000.00$70,000.00 -
CNC controller Fanuc 0i-TC Swing 29.5″ Maximum Cutting Diameter 19.7″ Maximum Turning Length 52″ Travel X axis 11.4″ Travel Z axis 53.1″ Guide Ways Boxed on X Linear For Z Boxed Spindle Nose A2 8 Max Bar Work Diameter 3″ Spindle Speed 3,600 rpm Rapid Traverse X axis 787 ipm Rapid Traverse Z axis 945 ipm Turret 12 Tools Live Tool Max. Speed – Live Tool Power 7.5 HP Tool Size (Square Shank) 1″ sq Tool Size (Round shank) 2″ Index Time (1 station/1 full rev) .3 sec Chuck ( Samwoo Kitagawa ) 12″Main 12″ Tail Stock Quill Diameter 3.9″ Tail Stock Quill Travel Manual 4.7″ Tail Stock Body Travel 53.1″ Tail Stock Quill Internal Taper MT# 5 Gear Box 2 Gear Ranges Horsepower(30min./Peak) 30 HP Torque 556.9 Ft-lbs Weight 16,534 lbs Bed 45 deg $50,000.00$50,000.00 -
CNC controller Fanuc 21iT Swing 29.5″ Maximum Cutting Diameter 19.7″ Maximum Turning Length 26.8″ Travel X axis 13.2″ Travel Z axis 29.5″ Guide Ways Boxed on X Linear For Z Boxed Spindle Nose A2 8 Max Bar Work Diameter left 3.5″ – right 2.5″ Spindle Speed 3000 RPM Rapid Traverse X axis 945 ipm Rapid Traverse Z axis 945 ipm Turret 12 Staion Live Tool Max. Speed – Live Tool Power 7.5 HP Tool Size (Square Shank) 1″ sq Tool Size (Round shank) 1.5″ Index Time (1 station/1 full rev) .2 sec Chuck ( Samwoo Kitagawa ) 12″Main 8″ Tail Stock Quill Diameter – Tail Stock Quill Travel (Programmable) – Tail Stock Body Travel – Tail Stock Quill Internal Taper – Gear Box – Horsepower(30min./Peak) 50/60 HP Torque 665 ft-lbs (L) 103 ft-lbs (R) Weight 13,900 lbs Bed 45 deg $69,000.00$69,000.00
CNC
Available Option(s):
