Eurotech B750

In stock


Model B750
Maximum bar capacity 3.22”
Maximum machining diameter 21.7”
Maximum machining length 30.11”
Maximum swing over diameter (bench) 26.7”
Spindle Bore 3.58”
Spindle speed range 3,000 RPM
Spindle motor 40 HP
Motor type Wide range
Spindle nose ASA A2-8
Turret indexing time 1 station 0.3 sec/pos. (1-station)
Turret indexing type Bi-directional
Voltage required 400 volt AC, 3-phase
Air required 80 psi @ 4 CFM
Amperage Draw 75 Amp.
Width 80”
Height 88”
Length with chip conveyor 200”
Machine weight with chip conveyor 16,755 lbs.
Z axis repeatability accuracy +/-.00004”
X  axis positioning accuracy +/-.00006”
C axis positioning accuracy +/-.00005°
C axis repeatability +/-.00001°


  • Fanuc EASY Plus Control with Custom Operator Panel
  • Tool load monitoring system.
  • 10.4” Graphics parts cutting display.
  • Extended editing functions; merge, change, move, copy.
  • 32-bit CPU high-speed Pentium microprocessor
    CNC system.
  • 3,000 RPM main spindle speed.
  • 40 horsepower wide range constant output 
  • 0.3 seconds/station turret indexing
  • 945 IPM B-axis rapid traverse.
  • 945 IPM Z -axis rapid traverse.
  • 709 IPM X -axis rapid traverse.
  • 295 IPM Y -axis rapid traverse.
  • 12” 3-jaw chuck on main spindle.
  • Rigid tapping; main 
  • High pressure coolant system.
  • Set of static.
  • Programmable tool probe system.
  • 16 Station Turret
  • C-axis control on main 
  • Air conditioned electronics cabinet.
  • Chip conveyor.
  • Programmable parts catcher
  • Eurotech Gap Elimination Ladder Logic for faster cycle time
  • Free lifetime programming classes
  • Free online phone support for both maintenance and programming


  • 32-bit hi-speed Pentium CPU
  • 10.4” color LCD display with extensive operator’s panel
  • Full keyboard
  • Graphic parts cutting display
  • Background editing
  • Extended editing functions
    (copy, move, merge, change)
  • Free position turret indexing
  • Tool geometry offsets – 64 pairs
  • Part program storage capacity – 1054 ft.
  • Minimum input resolution – .0001”
  • Absolute/incremental dimensioning system
  • Decimal point programming
  • Direct drawing input.  (A=angle, C=chamfer, R=radius)
  • Radius designation for circular
  • Sub-program nesting up to four deep
  • Sudden interruption protection (crash protection)
  • Canned cycles: turning, drilling, and threading (G80)
  • Multiple repetitive cycles (G70, G71, G72, and G73)
  • By-pass feed and speed override w/M-code
  • Manual rapid traverse
  • Manual pulse generator
  • Programmable data input (G10)
  • Straight, taper, and face threading
  • Thread pull out
  • Constant cutting speed control (G96)
  • Direct spindle speed RPM designation
  • Work coordinate system (G54-G59)
  • Program input of offset amount 
  • Tool nose radius compensation (G40, G41, 42)
  • Workshift
  • Call of Macro programs (G65-G66)
  • Custom Macro A and B
  • B-axis offset
  • 125 registered programs 
  • Up to three M-codes per line
  • Six additional M-codes
  • Program protect
  • Chuck and tailstock barrier
  • Preset parts counter
  • Run time, cycle time, and parts counter display
  • Preventive maintenance screen
  • RS232C & PCMCIA (serial) interface
  • Error detect
  • Advanced diagnostic functions
  • Display of axis and spindle motor current loads
  • Alarm message system 
  • SBS Tool Load Monitoring


Submit your review

Your email address will not be published. Required fields are marked *


There are no reviews yet.

View All Machine Types

FREE Appraisal


    Contact Us

      Use this contact form to schedule an appointment, inquire products and services, and for all other inquiries