All
  • 1-866-437-7315
  • LMI USA

TOYODA

TOYODA

  • Toyoda FH550SX

    FERROUS SPECS

    Pallet Size 21.65″ x 21.65″ (550 mm x 550 mm)
    Table Index Full NC table (360,000 positions)
    X-Axis Travel 29.52” (750 mm)
    Y-Axis Travel 31.50” (800 mm)
    Z-Axis Travel 33.46” (850 mm)
    Max Workpiece Swing 33.46” (850 mm)
    Max Workpiece Height 39.37″ (1,000 mm)
    Maximum Work Load on the Pallet 1,760 lb (800 kg)
    Spindle Output Torque 391 ft-lb (530 Nm)
    Available Spindle CAT#50 50HP 15,000 RPM (Wide Range 530 Nm)
    Rapid Feedrate (X axis) 2,362 ipm (60 m/min)
    Rapid Feedrate (Y axis) 2,362 ipm (60 m/min)
    Rapid Feedrate (Z axis) 2,362 ipm (60 m/min)
    Tool Storage Capacity 60 Standard (121 Optional)
    Standard Floor Space 130″ x 224″ (3,312 mm x 5,695 mm)
    Machine Height 126″ (3,200 mm)
    Standard Net Weight 35,494 lb (16,100 kg)

    NON-FERROUS SPECS

    Pallet Size 21.65″ x 21.65″ (550 mm x 550 mm)
    Table Index Full NC table (360,000 positions)
    X-Axis Travel 29.52” (750 mm)
    Y-Axis Travel 31.50” (800 mm)
    Z-Axis Travel 33.46” (850 mm)
    Max Workpiece Swing 33.46” (850 mm)
    Max Workpiece Height 39.37″ (1,000 mm)
    Maximum Work Load on the Pallet 1,760 lb (800 kg)
    Spindle Output Torque 123 ft-lb (167 Nm)
    Available Spindle CAT#50 30HP 15,000 RPM (0-15,000 in 2.6 sec)
    Rapid Feedrate (X axis) 2,362 ipm (60 m/min)
    Rapid Feedrate (Y axis) 2,362 ipm (60 m/min)
    Rapid Feedrate (Z axis) 2,362 ipm (60 m/min)
    Tool Storage Capacity 60 Standard (121 Optional)
    Standard Floor Space 130″ x 224″ (3,312 mm x 5,695 mm)
    Machine Height 126″ (3,200 mm)
    Standard Net Weight 35,494 lb (16,100 kg)

    HIGH TEMP ALLOY SPECS

    Pallet Size 21.65″ x 21.65″ (550 mm x 550 mm)
    Table Index Full NC table (360,000 positions)
    X-Axis Travel 29.52” (750 mm)
    Y-Axis Travel 31.50” (800 mm)
    Z-Axis Travel 33.46” (850 mm)
    Max Workpiece Swing 33.46” (850 mm)
    Max Workpiece Height 39.37″ (1,000 mm)
    Maximum Work Load on the Pallet 1,760 lb (800 kg)
    Spindle Output Torque 744 ft-lb (1,009 Nm)
    Available Spindle CAT#50 50HP 8,000 RPM (High Torque 1009 Nm)
    Rapid Feedrate (X axis) 2,362 ipm (60 m/min)
    Rapid Feedrate (Y axis) 2,362 ipm (60 m/min)
    Rapid Feedrate (Z axis) 2,362 ipm (60 m/min)
    Tool Storage Capacity 60 Standard (121 Optional)
    Standard Floor Space 130″ x 224″ (3,312 mm x 5,695 mm)
    Machine Height 126″ (3,200 mm)
    Standard Net Weight 35,494 lb (16,100 kg)

    ACCURACY

    Linear Position Accuracy ± .00012″ (.003 mm) full stroke
    Linear Repeatability ± .00008″ (.002 mm)
    Rotary Table Index Accuracy ± 7 arc seconds
    Rotary Table Index Repeatability ± 3.5 arc seconds

    REEQUIREMENTS

    Hydraulic Oil Mobil DTE Oil Light (14 gal)
    Slideway Lubrication Mobil Vactra #2 (.76 gal)
    Spindle Bearing Lubrication Mobil Velocite #6 (.76 gal)
    Spindle Cooling Mobil Velocite #3 (9.3 gal)
    Table Lubrication Mobil Gear 600 XP 150 (.79 gal)
    Air Source 56 ~ 70 psi (4 ~ 5 kgf / cm²)
    Power Capacity (Machine Wired: 208V – Transformer Not Included) 54 kVA
    Read more

    Toyoda FH550SX

  • Toyoda FH500J

    FERROUS SPECS

    Pallet Size 19.68″ x 19.68″ (500 mm x 500 mm)
    Table Index Full NC table (360,000 positions)
    X-Axis Travel 28.74” (730 mm)
    Y-Axis Travel 28.74” (730 mm)
    Z-Axis Travel 33.46” (850 mm)
    Max Workpiece Swing 31.50” (800 mm)
    Max Workpiece Height 39.37″ (1,000 mm)
    Maximum Work Load on the Pallet 1,540 lb (700 kg)
    Spindle Output Torque 295 ft-lb (400 Nm)
    Available Spindle CAT#50 50HP 15,000 RPM (High Torque 303 Nm)
    Rapid Feedrate (X axis) 2,362 ipm (60 m/min)
    Rapid Feedrate (Y axis) 2,362 ipm (60 m/min)
    Rapid Feedrate (Z axis) 2,362 ipm (60 m/min)
    Tool Storage Capacity 60 Standard (119 Optional)
    Standard Floor Space 91.73″ x 182.28″ (2,330 mm x 4,630 mm)
    Machine Height 113″ (2,870 mm)
    Standard Net Weight 29,700 lb (13,500 kg)

    NON-FERROUS SPECS

    Pallet Size 19.68″ x 19.68″ (500 mm x 500 mm)
    Table Index Full NC table (360,000 positions)
    X-Axis Travel 28.74” (730 mm)
    Y-Axis Travel 28.74” (730 mm)
    Z-Axis Travel 33.46” (850 mm)
    Max Workpiece Swing 31.50” (800 mm)
    Max Workpiece Height 39.37″ (1,000 mm)
    Maximum Work Load on the Pallet 1,540 lb (700 kg)
    Spindle Output Torque 123 ft-lb (167 Nm)
    Available Spindle CAT#40 30HP 15,000 RPM (0-15,000 in 1.9 sec)
    Available Spindle CAT#50 30HP 15,000 RPM (0-15,000 in 2.6 sec)
    Rapid Feedrate (X axis) 2,362 ipm (60 m/min)
    Rapid Feedrate (Y axis) 2,362 ipm (60 m/min)
    Rapid Feedrate (Z axis) 2,362 ipm (60 m/min)
    Tool Storage Capacity 60 Standard (119 Optional)
    Standard Floor Space 91.73″ x 182.28″ (2,330 mm x 4,630 mm)
    Machine Height 113″ (2,870 mm)
    Standard Net Weight 29,700 lb (13,500 kg)

    HIGH TEMP ALLOY SPECS

    Pallet Size 19.68″ x 19.68″ (500 mm x 500 mm)
    Table Index Full NC table (360,000 positions)
    X-Axis Travel 28.74” (730 mm)
    Y-Axis Travel 28.74” (730 mm)
    Z-Axis Travel 33.46” (850 mm)
    Max Workpiece Swing 31.50” (800 mm)
    Max Workpiece Height 39.37″ (1,000 mm)
    Maximum Work Load on the Pallet 1,540 lb (700 kg)
    Spindle Output Torque 295 ft-lb (400 Nm)
    Available Spindle CAT#50 50HP 15,000 RPM (High Torque 303 Nm)
    Rapid Feedrate (X axis) 2,362 ipm (60 m/min)
    Rapid Feedrate (Y axis) 2,362 ipm (60 m/min)
    Rapid Feedrate (Z axis) 2,362 ipm (60 m/min)
    Tool Storage Capacity 60 Standard (119 Optional)
    Standard Floor Space 91.73″ x 182.28″ (2,330 mm x 4,630 mm)
    Machine Height 113″ (2,870 mm)
    Standard Net Weight 29,700 lb (13,500 kg)

    ACCURACY

    Linear Position Accuracy ± .00012″ (.003 mm) full stroke
    Linear Repeatability ± .00008″ (.002 mm)
    Rotary Table Index Accuracy ± 7 arc seconds
    Rotary Table Index Repeatability ± 3.5 arc seconds

    REEQUIREMENTS

    Hydraulic Oil Mobil DTE Oil Light (4.75 gal)
    Slideway Lubrication Mobil Vactra #2 (1.1 gal)
    Spindle Bearing Lubrication Mobil Velocite #6 (1.1 gal)
    Spindle Cooling Mobil Velocite #3 (5.3 gal)
    Table Lubrication Mobil Gear 600 XP 150 (.79 gal)
    Air Source 56 ~ 70 psi (4 ~ 5 kgf / cm²)
    Power Capacity (Machine Wired: 208V – Transformer Not Included) 51 kVA
    Read more

    Toyoda FH500J

  • Toyoda FH450J

    Call For Specs

    Read more

    Toyoda FH450J

  • Toyoda FH450S

    FERROUS SPECS

    Pallet Size 17.7″ x 17.7″ (450 mm x 450 mm)
    Table Index Full NC table (360,000 positions)
    X-Axis Travel 23.62” (600 mm)
    Y-Axis Travel 23.62” (600 mm)
    Z-Axis Travel 23.62” (600 mm)
    Max Workpiece Swing 24.80” (630 mm)
    Max Workpiece Height 35.43″ (900 mm)
    Maximum Work Load on the Pallet 880 lb (400 kg)
    Spindle Output Torque 123 ft-lb (167 Nm)
    Available Spindle CAT#40 30 HP 15,000 RPM (0-15,000 in 1.9 sec)
    Available Spindle CAT#40 30 HP 20,000 RPM (0-20,000 in 2.4 sec)
    Rapid Feedrate (X axis) 1,968 ipm (50 m/min)
    Rapid Feedrate (Y axis) 1,968 ipm (50 m/min)
    Rapid Feedrate (Z axis) 1,968 ipm (50 m/min)
    Tool Storage Capacity 60 Standard (120 Optional)
    Standard Floor Space 100″ x 243″ (2,520 mm x 6,159 mm)
    Machine Height 125″ (3,160 mm)
    Standard Net Weight 25,300 lb (11,500 kg)

    NON-FERROUS SPECS

    Pallet Size 17.7″ x 17.7″ (450 mm x 450 mm)
    Table Index Full NC table (360,000 positions)
    X-Axis Travel 23.62” (600 mm)
    Y-Axis Travel 23.62” (600 mm)
    Z-Axis Travel 23.62” (600 mm)
    Max Workpiece Swing 24.80” (630 mm)
    Max Workpiece Height 35.43″ (900 mm)
    Maximum Work Load on the Pallet 880 lb (400 kg)
    Spindle Output Torque 123 ft-lb (167 Nm)
    Available Spindle CAT#40 30 HP 15,000 RPM (0-15,000 in 1.9 sec)
    Available Spindle CAT#40 30 HP 20,000 RPM (0-20,000 in 2.4 sec)
    Rapid Feedrate (X axis) 1,968 ipm (50 m/min)
    Rapid Feedrate (Y axis) 1,968 ipm (50 m/min)
    Rapid Feedrate (Z axis) 1,968 ipm (50 m/min)
    Tool Storage Capacity 60 Standard (120 Optional)
    Standard Floor Space 100″ x 243″ (2,520 mm x 6,159 mm)
    Machine Height 125″ (3,160 mm)
    Standard Net Weight 25,300 lb (11,500 kg)

    HIGH TEMP ALLOY SPECS

    Pallet Size 17.7″ x 17.7″ (450 mm x 450 mm)
    Table Index Full NC table (360,000 positions)
    X-Axis Travel 23.62” (600 mm)
    Y-Axis Travel 23.62” (600 mm)
    Z-Axis Travel 23.62” (600 mm)
    Max Workpiece Swing 24.80” (630 mm)
    Max Workpiece Height 35.43″ (900 mm)
    Maximum Work Load on the Pallet 880 lb (400 kg)
    Spindle Output Torque 123 ft-lb (167 Nm)
    Available Spindle CAT#40 30 HP 15,000 RPM (0-15,000 in 1.9 sec)
    Rapid Feedrate (X axis) 1,968 ipm (50 m/min)
    Rapid Feedrate (Y axis) 1,968 ipm (50 m/min)
    Rapid Feedrate (Z axis) 1,968 ipm (50 m/min)
    Tool Storage Capacity 60 Standard (120 Optional)
    Standard Floor Space 100″ x 243″ (2,520 mm x 6,159 mm)
    Machine Height 125″ (3,160 mm)
    Standard Net Weight 25,300 lb (11,500 kg)

    ACCURACY

    Linear Position Accuracy ±.00012″ (.003 mm) full stroke
    Linear Repeatability ± .00006″ (.0015 mm)
    Rotary Table Index Accuracy ± 7 arc seconds
    Rotary Table Index Repeatability ± 3.5 arc seconds

    REEQUIREMENTS

    Hydraulic Oil Mobil DTE Oil Light (14 gal)
    Slideway Lubrication Mobil Vactra #2 (.76 gal)
    Spindle Bearing Lubrication Mobil Velocite #6 (.76 gal)
    Spindle Cooling Mobil Velocite #3 (4.2 gal)
    Table Lubrication Mobil Gear 600 XP 150 (1.1 gal)
    Air Source 56 ~ 70 psi (4 ~ 5 kgf / cm²)
    Power Capacity (Machine Wired: 208V – Transformer Not Included) 52 kVA
    Read more

    Toyoda FH450S

  • Toyoda FH400J

    FERROUS SPECS

    Pallet Size 15.75″ x 15.75″ (400 mm x 400 mm)
    Table Index Full NC table (360,000 positions)
    X-Axis Travel 23.62” (600 mm)
    Y-Axis Travel 22.05” (560 mm)
    Z-Axis Travel 24.80” (630 mm)
    Max Workpiece Swing 24.80” (630 mm)
    Max Workpiece Height 35.43″ (900 mm)
    Maximum Work Load on the Pallet 880 lb (400 kg)
    Spindle Output Torque 123 ft-lb (167 Nm)
    Available Spindle CAT #40 30 HP 15,000 RPM (0-15,000 in 1.9 sec)
    Rapid Feedrate (X axis) 2,362 ipm (60 m/min)
    Rapid Feedrate (Y axis) 2,362 ipm (60 m/min)
    Rapid Feedrate (Z axis) 2,362 ipm (60 m/min)
    Tool Storage Capacity 60 Standard (119 Optional)
    Standard Floor Space 83″ x 166″ (2,100 mm x 4,205 mm)
    Machine Height 108″ (27,735 mm)
    Standard Net Weight 24,200 lb (11,000 kg)

    NON-FERROUS SPECS

    Pallet Size 15.75″ x 15.75″ (400 mm x 400 mm)
    Table Index Full NC table (360,000 positions)
    X-Axis Travel 23.62” (600 mm)
    Y-Axis Travel 22.05” (560 mm)
    Z-Axis Travel 24.80” (630 mm)
    Max Workpiece Swing 24.80” (630 mm)
    Max Workpiece Height 35.43″ (900 mm)
    Maximum Work Load on the Pallet 880 lb (400 kg)
    Spindle Output Torque 123 ft-lb (167 Nm)
    Available Spindle CAT #40 30 HP 15,000 RPM (0-15,000 in 1.9 sec)
    Rapid Feedrate (X axis) 2,362 ipm (60 m/min)
    Rapid Feedrate (Y axis) 2,362 ipm (60 m/min)
    Rapid Feedrate (Z axis) 2,362 ipm (60 m/min)
    Tool Storage Capacity 60 Standard (119 Optional)
    Standard Floor Space 83″ x 166″ (2,100 mm x 4,205 mm)
    Machine Height 108″ (27,735 mm)

    HIGH TEMP ALLOY SPECS

    Pallet Size 15.75″ x 15.75″ (400 mm x 400 mm)
    Table Index Full NC table (360,000 positions)
    X-Axis Travel 23.62” (600 mm)
    Y-Axis Travel 22.05” (560 mm)
    Z-Axis Travel 24.80” (630 mm)
    Max Workpiece Swing 24.80” (630 mm)
    Max Workpiece Height 35.43″ (900 mm)
    Maximum Work Load on the Pallet 880 lb (400 kg)
    Spindle Output Torque 123 ft-lb (167 Nm)
    Available Spindle CAT #40 30 HP 15,000 RPM (0-15,000 in 1.9 sec)
    Rapid Feedrate (X axis) 2,362 ipm (60 m/min)
    Rapid Feedrate (Y axis) 2,362 ipm (60 m/min)
    Rapid Feedrate (Z axis) 2,362 ipm (60 m/min)
    Tool Storage Capacity 60 Standard (119 Optional)
    Standard Floor Space 83″ x 166″ (2,100 mm x 4,205 mm)
    Machine Height 108″ (27,735 mm)
    Standard Net Weight 24,200 lb (11,000 kg)

    ACCURACY

    Linear Position Accuracy ± .00012″ (.003 mm) full stroke
    Linear Repeatability ± .00006″ (.0015 mm)
    Rotary Table Index Accuracy ± 7 arc seconds
    Rotary Table Index Repeatability ± 3.5 arc seconds

    REEQUIREMENTS

    Hydraulic Oil Mobil DTE Oil Light (4.75 gal)
    Slideway Lubrication Mobil Vactra #2 (.76 gal)
    Spindle Bearing Lubrication Mobil Velocite #6 (.76 gal)
    Spindle Cooling Mobil Velocite #3 (4 gal)
    Table Lubrication Mobil Gear 600 XP 150 (.4 gal)
    Air Source 56 ~ 70 psi (4 ~ 5 kgf / cm²)
    Power Capacity (Machine Wired: 208V – Transformer Not Included) 52 kVA
    Read more

    Toyoda FH400J

  • Toyoda FA 1050S 5A

    Travel (X / Y / Z)
    59.1" / 55.1" / 45.2”

    FERROUS SPECS

    Pallet Size 41.3″ x 41.3″ (1,050 mm x 1,050 mm)
    Trunnion Table Index Increment (A-axis) .0001 degree (-100° ~ +15°)
    Trunnion Table Index Increment (B-axis) .0001 degree
    X-Axis Travel 59.1″ (1,500 mm)
    Y-Axis Travel 55.1″ (1,400 mm)
    Z-Axis Travel 45.2” (1,150 mm)
    Max Workpiece Swing 51.18” (1,300 mm)
    Max Workpiece Height 32.48” (825 mm)
    Maximum Work Load on the Pallet 4,400 lb (2,000 kg)
    Spindle Output Torque 391 ft-lb (530 Nm)
    Available Spindle CAT#50 60HP 6,000 RPM (Geared Head 1,305 Nm)
    Available Spindle CAT#50 50HP 15,000 RPM (Wide Range 530 Nm)
    Rapid Feedrate (X axis) 590 ipm (15 m/min)
    Rapid Feedrate (Y axis) 944 ipm (24 m/min)
    Rapid Feedrate (Z axis) 944 ipm (24 m/min)
    Tool Storage Capacity 60 Standard (190, 240, 384 Optional)
    Standard Floor Space 276″ x 331″ (7,000 mm x 8,400 mm)
    Machine Height 161″ (4,100 mm)
    Standard Net Weight 112,436 lbs (51,000 kg)

    NON-FERROUS SPECS

    Pallet Size 41.3″ x 41.3″ (1,050 mm x 1,050 mm)
    Trunnion Table Index Increment (A-axis) .0001 degree (-100° ~ +15°)
    Trunnion Table Index Increment (B-axis) .0001 degree
    X-Axis Travel 59.1″ (1,500 mm)
    Y-Axis Travel 55.1” (1,400 mm)
    Z-Axis Travel 45.2” (1,150 mm)
    Max Workpiece Swing 51.18” (1,300 mm)
    Max Workpiece Height 32.48” (825 mm)
    Maximum Work Load on the Pallet 4,400 lb (2,000 kg)
    Spindle Output Torque 123 ft-lb (167 Nm)
    Available Spindle CAT#50 30HP 15,000 RPM (0-15,000 in 2.6 sec)
    Rapid Feedrate (X axis) 590 ipm (15 m/min)
    Rapid Feedrate (Y axis) 944 ipm (24 m/min)
    Rapid Feedrate (Z axis) 944 ipm (24 m/min)
    Tool Storage Capacity 60 Standard (190, 240, 384 Optional)
    Standard Floor Space 276″ x 331″ (7,000 mm x 8,400 mm)
    Machine Height 161″ (4,100 mm)
    Standard Net Weight 112,436 lbs (51,000 kg)

    HIGH TEMP ALLOY SPECS

    Pallet Size 41.3″ x 41.3″ (1,050 mm x 1,050 mm)
    Trunnion Table Index Increment (A-axis) .0001 degree (-100° ~ +15°)
    Trunnion Table Index Increment (B-axis) .0001 degree
    X-Axis Travel 59.1″ (1,500 mm)
    Y-Axis Travel 55.1” (1,400 mm)
    Z-Axis Travel 45.2” (1,150 mm)
    Max Workpiece Swing 51.18” (1,300 mm)
    Max Workpiece Height 32.48” (825 mm)
    Maximum Work Load on the Pallet 4,400 lb (2,000 kg)
    Spindle Output Torque 744 ft-lb (1,009 Nm)
    Available Spindle CAT#50 50HP 8,000 RPM (High Torque 1,009 Nm)
    Rapid Feedrate (X axis) 590 ipm (15 m/min)
    Rapid Feedrate (Y axis) 944 ipm (24 m/min)
    Rapid Feedrate (Z axis) 944 ipm (24 m/min)
    Tool Storage Capacity 60 Standard (190, 240, 384 Optional)
    Standard Floor Space 276″ x 331″ (7,000 mm x 8,400 mm)
    Machine Height 161″ (4,100 mm)
    Standard Net Weight 112,436 lbs (51,000 kg)

    ACCURACY

    Linear Position Accuracy ± .000078″ (±0.002 mm) full stroke
    Linear Repeatability ± 0.000039″ (± 0.001 mm)
    Rotary Positioning Accuracy (A and B axes) ± 5 arc seconds
    Rotary Positioning Repeatability (A and B axes) ± 3 arc seconds

    REEQUIREMENTS

    Hydraulic Oil Mobil DTE Oil Light (16.6 gal) (63 liter)
    Slideway Lubrication Daphine Multiway 32C 1.5 gal (5.5 liter)
    Spindle Bearing Lubrication Mobil Velocite #3 (9.2 gal) (35 liter)
    A, B Axis Lubrication Mobil Gear 600 XP 68 A axis (10.6 gal/40 liter) B axis (5.3 gal/20 liter)
    Air Source 56 ~ 70 psi (4 ~ 5 kgf / cm²)
    Power Capacity (Machine Wired: 208V – Transformer Not Included) 71 kVA
    Read more

    Toyoda FA 1050S 5A

    Travel (X / Y / Z)
    59.1" / 55.1" / 45.2”

  • UA2090ti

    Toyoda UA2090

    Read more

    Toyoda UA2090

  • ux570

    Toyoda UX 570

    Travel (X / Y / Z)
    21" / 27.5" / 19.6 "

    Specifications

    High-speed, five-axis vertical machining center
    Machine Type: Machining Center
    Num. of Axes: 5
    Work Support: Table
    Column Construction: Multi/Bridge Column Style: Travelling
    Operation Type: CNC
    CNC Brand: Fanuc 31i B5
    TABLE/WORK SUPPORT
    Table Size L x W (in.) 21.600 x 21.600
    Max. Workpiece Weight (lbs) 1,210
    Dual Axis Table:  Standard
    SPINDLE(S)
    Num. Main Spindles 1
    Orientation Vertical
    Taper CAT40
    Top RPM 15,000 Opt: 22,000
    Horse Power (30 min rating) 30.00
    TOOLING
    Primary Tool Carrier(s) ATC
    Number of Tools 30    Opt. 60
    Tool Change Time C-to-C (sec) 6.00 sec tool-to-tool
    Max. Tool Length (in.) 11.800
    Max. Tool Diameter (in.) 3.540 (with empty adacent pockets) Opt. 5.100
    Max. Tool Weight 17.60
    AXES AND TRAVELS
    Number of Axes: 5   U Axis: None
    Travel Max Feed Rapid Rate
    X1 Std. 21.600 in. 394 ipm 1,889 ipm
    Y1 Std. 27.500 in. 394 ipm 1,889 ipm
    Z1 Std. 19.600 in. 394 ipm 1,889 ipm
    A1 Std. 150.000 deg 25 rpm
    C1 Std. 360.000 deg 100 rpm
    WEIGHTS AND MEASURES
    Machine Dimensions (l x w x h)(in.) 159 x 118 x 138
    Spindle Nose To Table (Max) 23.600
    Spindle Nose To Table (Min) 3.900

     

     

     

    Read more

    Toyoda UX 570

    Travel (X / Y / Z)
    21" / 27.5" / 19.6 "

  • UA2090ti

    Toyoda UA2590

    Call For Specs

    Read more

    Toyoda UA2590

  • FV2090

    Toyoda FV 2090

    Travel (X / Y / Z)
    78.7" / 35.4" / 35.4"

    FERROUS SPECS

    Table Size 84.6″ x 35.4″ (2,150 mm x 900 mm)
    X-Axis Travel 78.7″ (2,000 mm)
    Y-Axis Travel 35.4″ (900 mm)
    Z-Axis Travel 35.4″ (900 mm)
    Maximum Table Load 4,840 lb (2,200 kg)
    Distance from Spindle Nose to Table Top 7.9″ to 39.4″ (200 mm to 1,000 mm)
    Spindle Drive Motor (30 min. / cont.) 35 HP (26 kW) / 30 HP (22 kW)
    Spindle Output Torque 485 ft-lb (658 Nm)
    Spindle Speed Gearbox (CAT50): 6,000 RPM
    Spindle Speed Direct Drive (CAT50): 10,000 RPM DIRECT DRIVE
    Tool Storage Capacity 30 Standard (40, 60 Optional)
    Standard Floor Space 255″ x 195″ x 143″ (6,480 mm x 4,948 mm x 3,620 mm)
    Machine Weight 50,705 lb (23,000 kg)
    Chip Conveyor Hinged Belt Lift Up type, 47″ Drop Height from floor

    NON-FERROUS SPECS

    Table Size 84.6″ x 35.4″ (2,150 mm x 900 mm)
    X-Axis Travel 78.7″ (2,000 mm)
    Y-Axis Travel 35.4″ (900 mm)
    Z-Axis Travel 35.4″ (900 mm)
    Maximum Table Load 4,840 lb (2,200 kg)
    Distance from Spindle Nose to Table Top 7.9″ to 39.4″ (200 mm to 1,000 mm)
    Spindle Drive Motor (30 min. / cont.) 35 HP (26 kW) / 30 HP (22 kW)
    Spindle Output Torque 485 ft-lb (658 Nm)
    Spindle Speed Gearbox (CAT50): 6,000 RPM
    Spindle Speed Direct Drive (CAT50): 10,000 RPM
    Tool Storage Capacity 30 Standard (40, 60 Optional)
    Standard Floor Space 255″ x 195″ x 143″ (6,480 mm x 4,948 mm x 3,620 mm)
    Machine Weight 50,705 lb (23,000 kg)
    Chip Conveyor Hinged Belt Lift Up type, 47″ Drop Height from floor

    HIGH TEMP ALLOY SPECS

    Table Size 84.6″ x 35.4″ (2,150 mm x 900 mm)
    X-Axis Travel 78.7″ (2,000 mm)
    Y-Axis Travel 35.4″ (900 mm)
    Z-Axis Travel 35.4″ (900 mm)
    Maximum Table Load 4,840 lb (2,200 kg)
    Distance from Spindle Nose to Table Top 7.9″ to 39.4″ (200 mm to 1,000 mm)
    Spindle Drive Motor (30 min. / cont.) 35 HP (26 kW) / 30 HP (22 kW)
    Spindle Output Torque 485 ft-lb (658 Nm)
    Spindle Speed Gearbox (CAT50): 6,000 RPM
    Spindle Speed Direct Drive (CAT50): 10,000 RPM DIRECT DRIVE
    Tool Storage Capacity 30 Standard (40, 60 Optional)
    Standard Floor Space 255″ x 195″ x 143″ (6,480 mm x 4,948 mm x 3,620 mm)
    Machine Weight 50,705 lb (23,000 kg)
    Chip Conveyor Hinged Belt Lift Up type, 47″ Drop Height from floor

    ACCURACY

    REEQUIREMENTS

    Read more

    Toyoda FV 2090

    Travel (X / Y / Z)
    78.7" / 35.4" / 35.4"

  • Toyoda FV1890

    Read more

    Toyoda FV1890

  • FV1680

    Toyoda FV 1680

    Travel (X / Y / Z)
    63" / 31.5" / 31.5"

    FERROUS SPECS

    Table Size 68.9″ x 31.5″ (1,750 mm x 800 mm)
    X-Axis Travel 63″ (1,600 mm)
    Y-Axis Travel 31.5″ (800 mm)
    Z-Axis Travel 31.5″ (800 mm)
    Maximum Table Load 4,400 lb (2,000 kg)
    Distance from Spindle Nose to Table Top 7.9″ to 39.4″ (200 mm to 1,000 mm)
    Spindle Drive Motor (30 min. / cont.) 35 HP (26 kW) / 30 HP (22 kW)
    Spindle Output Torque 485 ft-lb (658 Nm)
    Spindle Speed Gearbox (CAT50): 6,000 RPM
    Spindle Speed Direct Drive (CAT50): 10,000 RPM DIRECT DRIVE
    Tool Storage Capacity 40 Standard (60 Optional)
    Standard Floor Space 217″ x 172″ x 137″ (5,516 mm x 4,374 mm x 3,378 mm)
    Machine Weight 35,273 lb (16,000 kg)
    Chip Conveyor Hinged Belt Lift Up type, 47″ Drop Height from floor

    NON-FERROUS SPECS

    Table Size 68.9″ x 31.5″ (1,750 mm x 800 mm)
    X-Axis Travel 63″ (1,600 mm)
    Y-Axis Travel 31.5″ (800 mm)
    Z-Axis Travel 31.5″ (800 mm)
    Maximum Table Load 4,400 lb (2,000 kg)
    Distance from Spindle Nose to Table Top 7.9″ to 39.4″ (200 mm to 1,000 mm)
    Spindle Drive Motor (30 min. / cont.) 35 HP (26 kW) / 30 HP (22 kW)
    Spindle Output Torque 485 ft-lb (658 Nm)
    Spindle Speed Gearbox (CAT50): 6,000 RPM
    Spindle Speed Direct Drive (CAT50): 10,000 RPM
    Tool Storage Capacity 40 Standard (60 Optional)
    Standard Floor Space 217″ x 172″ x 137″ (5,516 mm x 4,374 mm x 3,378 mm)
    Machine Weight 35,273 lb (16,000 kg)
    Chip Conveyor Hinged Belt Lift Up type, 47″ Drop Height from floor

    HIGH TEMP ALLOY SPECS

    Table Size 68.9″ x 31.5″ (1,750 mm x 800 mm)
    X-Axis Travel 63″ (1,600 mm)
    Y-Axis Travel 31.5″ (800 mm)
    Z-Axis Travel 31.5″ (800 mm)
    Maximum Table Load 4,400 lb (2,000 kg)
    Distance from Spindle Nose to Table Top 7.9″ to 39.4″ (200 mm to 1,000 mm)
    Spindle Drive Motor (30 min. / cont.) 35 HP (26 kW) / 30 HP (22 kW)
    Spindle Output Torque 485 ft-lb (658 Nm)
    Spindle Speed Gearbox (CAT50): 6,000 RPM
    Spindle Speed Direct Drive (CAT50): 10,000 RPM DIRECT DRIVE
    Tool Storage Capacity 40 Standard (60 Optional)
    Standard Floor Space 217″ x 172″ x 137″ (5,516 mm x 4,374 mm x 3,378 mm)
    Machine Weight 35,273 lb (16,000 kg)
    Chip Conveyor Hinged Belt Lift Up type, 47″ Drop Height from floor

    ACCURACY

    REEQUIREMENTS

    3
    Read more

    Toyoda FV 1680

    Travel (X / Y / Z)
    63" / 31.5" / 31.5"

View All Machine Types

Lamarche Machinery

FREE Appraisal


    YesNo

    Contact Us

      Use this contact form to schedule an appointment, inquire products and services, and for all other inquiries

      Privacy Policy