-
HYUNDAI WIA KIT4500
Automation/Process Integration, Easy to Operate Gang Type
DESCRIPTION UNIT KIT4500 Max Turning Diameter inch 6.5″ Max Turning Length inch 11.8″ Table Size inch 7.9″×21.7″ Chuck Size inch 6″ Driving Method – Belt Spindle RPM r/min 6,000 Spindle Output HP 20/15 Spindle Torque lbf.ft 70.5/51.6 Travel(X/Z) inch 17.7″/11.8″ Rapid Travel(X/Z) in/min 1181/1417 Slide Type – LM No. of Tools EA 6 Tool Size inch 0.75″/1.25″ Specifications are subject to change without notice for quality improvement.
In case of any further information, please refer to the machine catalog.HYUNDAI WIA KIT4500
Automation/Process Integration, Easy to Operate Gang Type
-
DESCRIPTION UNIT E160LMA Max Turning Dia inch 7.5″ Max Turning Length inch 17.7″ Chuck Size inch 6″ Driving Method – Belt Spindle RPM r/min 6,000 Spindle Output HP 15/20 Spindle Torque lbf.ft 38.7/70.4 Travel(X/Z) inch 6.5″/18.1″ Rapid Travel(X/Z) in/min 1181 / 1181 Slide Type – LM No. of Tools EA 12 Tool Size (ID/OD) inch 0.75″/1.25 Milling Tool Speed r/min 4,500 Specifications are subject to change without notice for quality improvement.
In case of any further information, please refer to the machine catalog. -
Description Unit KIT250 CAPACITY Swing Over the Bed in 12.6″ Max. Turning Dia. in 6.3″ Max. Turning Length in 5.9″ Bar Capacity in 1.3″ SPINDLE Chuck Size in 5.3″ Spindle Bore in 1.65″ Spindle Speed (rpm) r/min 50~7,000 Motor (Max/Cont.) kW(HP) 5.5/3.7 (7.4/5) Torque (Max/Cont.) ft.lb 35.4/23.9 Spindle Type – BELT Spindle Nose – FLAT ø110 FEED Travel (X/Z) in 9.8″/7.9″ Rapid Travel (X/Z) in/min 945/1181 Slide Type – LM GUIDE BLOCK TOOL No. of Tool EA 4 Tool Size OD in 1″ ID in 1″ TANK CAPACITY Coolant Tank ℓ(gel) 95 (25.1) Lubricating Tank ℓ(gel) 1.8 (0.48) POWER SUPPLY Electric Power Supply kVA 20 Thickness of Power Cable Sq OVER 16 Voltage V/Hz 220/60 (200/50) MACHINE Floor Space (L×W) in 66″×66″ in 66.1″×66.8″ Height in 61.8″ Weight kg(lb) 1,900 (4,189) NC Controller HYUNDAI WIA FANUC i Series -
Description Unit KIT450 CAPACITY Swing Over the Bed in 20.9″ Max. Turning Dia. in 6.5″ Max. Turning Length in 12.8″ Bar Capacity in 1.8″ SPINDLE Chuck Size in 6.5″ Spindle Bore in 2.05″ [ø 2.09″] Spindle Speed (rpm) r/min 50~6,000 Motor (Max/Cont.) kW(HP) 15/11 (20/15) [12/9 (16/12)] Torque (Max/Cont.) ft.lb 70 / 51 Spindle Type – BELT Spindle Nose – A2-5 FEED Travel (X/Z) mm(in) 450/300 (17.7″/11.8″) Rapid Travel (X/Z) in/min 1181 / 1417 Slide Type – LM GUIDE BLOCK TOOL No. of Tool EA 6 Tool Size OD in 1″ ID in 1.25″ TANK CAPACITY Coolant Tank ℓ(gel) 120 (31.7) Lubricating Tank ℓ(gel) 1.8 (0.48) POWER SUPPLY Electric Power Supply kVA 20 Thickness of Power Cable Sq OVER 16 Voltage V/Hz 220/60 (200/50) MACHINE Floor Space (L×W) mm 2,100×1,435 in (82.7″×56.5″) Height in 72″ Weight kg(lb) 2,700 (5,952) NC Controller HYUNDAI WIA FANUC i Series [SIEMENS 802D sl] -
Specifications
Description Unit L160A CAPACITY Swing Over the Bed in 23.6″ Max. Turning Dia. in 14″ Max. Turning Length in 18.1″ Bar Capacity in 1.8″ SPINDLE Chuck Size in 6″ Spindle Bore in 2.1″ Spindle Speed (rpm) r/min 6,000 [6,000] Motor (Max/Cont.) kW(HP) 11/7.5(14.7/10) [10.8/9(14.5/12)] Torque (Max/Cont.) N.m 70/47.7(51.6/35.2) [69/57.3(50.8/42.2)] Spindle Type – BELT Spindle Nose – A2-5 FEED Travel (X/Z) in 8.7″/18.1″ Rapid Travel (X/Z) in/min 1,417/1,417 Slide Type – X-Axis : Ball Type LM GUIDE, Z-Axis : ROLLER Type LM GUIDE BLOCK TOOL No. of Tool EA 12 Tool Size OD in 1″ ID in 1.6″ TANK CAPACITY Coolant Tank ℓ(gel) 150 (39.6) Lubricating Tank ℓ(gel) 1.8 (0.5) POWER SUPPLY Electric Power Supply kVA 19 Thickness of Power Cable Sq OVER 16 Voltage V/Hz 220/60 (200/50) MACHINE Floor Space (L×W) mm 2,720×1,685 in 107.1″×66.3″ Height in 73.2″ Weight kg(lb) 4,300 (9,480) NC Controller HYUNDAI WIA FANUC i Series [SIEMENS 828D] -
Specifications
Description Unit TS100 CAPACITY Max. / Swing over saddle mm(in) 330 mm (Ø12.99″) Max. Turning Dia. mm(in) 200 mm (7.87″) Max. Turning Length mm(in) 305 mm (12″) Bar Capacity mm(in) 32 mm (1.25’) SPINDLE Chuck Size (in) (6″) Hole through spindle mm(in) 41mm (1.61″) Spindle Speed (rpm) r/min 60~6,000 Motor output ( cont. / 30 min.) HP/kW 6.57 HP (4.9kW) Motor (Max/Cont.) kW(HP) 5.5/3.7 (7.4/5) Torque (Max/Cont.) N.m Spindle Type – BELT Spindle Nose – A2-5 FEED Travel (X/Z) mm(in) 12” (305 mm) Rapid Travel (X/Z) m/min 24m/min Slide Type – Box way X-axis servo motor HP (KW) 1 HP ( 0.75 kW) Z-axis servo motor HP (KW) 1 HP ( 0.75 kW) BLOCK TOOL No. of Tool / Stations EA 8 Tool Size OD mm(in) ID mm(in) TANK CAPACITY Coolant Tank Gallon / litre 21 gal (80L) Lubricating Tank ℓ(gel) POWER SUPPLY Electric Power Supply kVA Thickness of Power Cable Sq Voltage V/Hz MACHINE Dimensions
(L×WxH)mm(in) 1,605 X 1,328 X 1,650 mm
(63.18″ X 52.28″ X 64.96)Weight kg(lb) 1,750 (3,850) NC Controller FANUC Oi-Mate TD -
Specifications
Description Unit GLS-1500 L CAPACITY Max. / Swing over saddle mm(in) 230 mm (9″) Max. Turning Diameter mm(in) 390 mm (15.35″) Max. Turning Length mm(in) 330 mm (13″) Bar Capacity mm(in) 51 mm (2″) SPINDLE Chuck Size (in) (6″) Hole through spindle mm(in) 61mm (2.4″) Spindle Speed (rpm) rpm 6,000 Motor output ( cont. / 30 min.) Hp / kW 15 (11kW) Motor (Max/Cont.) kW(HP) Torque (Max/Cont.) N.m Spindle Type – Direct Belt Drive Spindle Nose – A2-5 FEED Travel (X/Z) mm(in) (230mm (90″) (330mm (13″) Rapid Travel (X/Z) m/min 30 m/min Slide Type – Linear Guide Way X-axis servo motor HP (KW) 3.6 HP ( 2.7 kW) Z-axis servo motor HP (KW) 3.6 HP ( 2.7 kW) BLOCK TOOL No. of Tool / Stations T 12 Tool Size OD mm(in) 25mm (1″) ID mm(in) 40mm (1″) TANK CAPACITY Coolant Tank Gallon / litre 26 gal (100L) Lubricating Tank ℓ(gel) POWER SUPPLY Electric Power Supply kVA 200 Thickness of Power Cable Sq Voltage V/Hz MACHINE Dimensions
(L×WxH)mm(in) 86″ x 62″ x 67″ ( 2,174 x 1,550 x 1,680 mm ) Weight kg(lb) 3,000 kg (6,600lb) NC Controller FANUC Oi-TF -
Specifications
Description Unit GS-1500YL CAPACITY Max. / Swing over saddle mm(in) 559 mm (22″) Max. Turning Diameter mm(in) 429mm (16.9″) Max. Turning Length mm(in) 373 mm (14.7″) Bar Capacity mm(in) 45 mm (1.77’) SPINDLE Chuck Size (in) (6″) Hole through spindle mm(in) 61 mm (2.4″) Spindle Speed (rpm) rpm 6,000 rpm Motor output ( cont. / 30 min.) Hp / kW 15 / 20 HP ( 11 / 15 kW ) Motor (Max/Cont.) kW(HP) Torque (Max/Cont.) N.m Spindle Type – Direct Belt Drive Spindle Nose – A2-5 FEED Travel (X/Z) mm(in) 230mm (90’) / 330mm (13’) Rapid Travel (X/Z) m/min 30 m/min Slide Type – Linear Guide Way X-axis servo motor HP (KW) 3.6 HP (2.7 kW) Z-axis servo motor HP (KW) 3.6 HP (2.7 kW) BLOCK TOOL No. of Tool / Stations T 12 Tool Size OD mm(in) 25 mm (1”) ID mm(in) 40mm (1”) TANK CAPACITY Coolant Tank Gallon / litre 44.9 gal (170L) Lubricating Tank ℓ(gel) POWER SUPPLY Electric Power Supply kVA 20 kVA Thickness of Power Cable Sq Voltage V/Hz MACHINE Dimensions
(L×WxH)mm(in) 105″ x 73″ x 82″ ( 2,667 x 1,832 x 2,065 mm ) Weight kg(lb) 8,200 lb ( 3,700 kg ) NC Controller FANUC Oi-TF -
Specifications
Description Unit GS-1500LM CAPACITY Max. / Swing over saddle mm(in) 559 mm (22″) Max. Turning Diameter mm(in) 429mm (16.9″) Max. Turning Length mm(in) 610 mm (24″) Bar Capacity mm(in) 45 mm (1.77’) SPINDLE Chuck Size (in) (6″) Hole through spindle mm(in) 61 mm (2.4″) Spindle Speed (rpm) rpm 6,000 rpm Motor output ( cont. / 30 min.) Hp / kW 15 / 20 HP ( 11 / 15 kW ) Motor (Max/Cont.) kW(HP) Torque (Max/Cont.) N.m Spindle Type – Direct Belt Drive Spindle Nose – A2-5 FEED Travel (X/Z) mm(in) 230mm (90’) / 330mm (13’) Rapid Travel (X/Z) m/min 30 m/min Slide Type – Linear Guide Way X-axis servo motor HP (KW) 3.6 HP (2.7 kW) Z-axis servo motor HP (KW) 3.6 HP (2.7 kW) BLOCK TOOL No. of Tool / Stations T 12 Tool Size OD mm(in) 25 mm (1”) ID mm(in) 40mm (1”) TANK CAPACITY Coolant Tank Gallon / litre 26 gal (100L) Lubricating Tank ℓ(gel) POWER SUPPLY Electric Power Supply kVA 20 kVA Thickness of Power Cable Sq Voltage V/Hz MACHINE Dimensions
(L×WxH)mm(in) 86″ x 62″ x 67″ ( 2,174 x 1,550 x 1,680 mm ) Weight kg(lb) 6,600 lb ( 3,000 kg ) NC Controller FANUC Oi-TF -
Specifications
Description Unit GLS-2000 L CAPACITY Max. / Swing over saddle mm(in) 230 mm (9″) Max. Turning Diameter mm(in) 390 mm (15.35″) Max. Turning Length mm(in) 630 mm (24.8″) Bar Capacity mm(in) 51 mm (2’) SPINDLE Chuck Size (in) (8″) Hole through spindle mm(in) 76mm (3″) Spindle Speed (rpm) rpm 4,500 Motor output ( cont. / 30 min.) Hp / kW 20 HP (15kW) Motor (Max/Cont.) kW(HP) Torque (Max/Cont.) N.m Spindle Type – Direct Belt Drive Spindle Nose – A2-6 FEED Travel (X/Z) mm(in) (230mm (90’) (630mm (24.8’) Rapid Travel (X/Z) m/min 30 m/min Slide Type – Linear Guide Way X-axis servo motor HP (KW) 3.6 HP ( 2.7 kW) Z-axis servo motor HP (KW) 3.6 HP ( 2.7 kW) BLOCK TOOL No. of Tool / Stations T 10 Tool Size OD mm(in) 25mm (1’) ID mm(in) 40mm (1/2’) TANK CAPACITY Coolant Tank Gallon / litre 42 gal (160L) Lubricating Tank ℓ(gel) POWER SUPPLY Electric Power Supply kVA 220 Thickness of Power Cable Sq Voltage V/Hz MACHINE Dimensions
(L×WxH)mm(in) 103″ x 71″ x 69″ ( 2,612 x 1,780 x 1,752 mm ) Weight kg(lb) 3,400 kg (7,500lb) NC Controller FANUC Oi-TF -
Specifications
Description Unit GA-2000 C CAPACITY Max. / Swing over saddle mm(in) 579 mm (22.8″) Max. Turning Diameter mm(in) 351 mm (13.8″) Max. Turning Length mm(in) 309 mm (12.16″) Bar Capacity mm(in) 51 mm (2’) SPINDLE Chuck Size (in) (8″) Hole through spindle mm(in) 66mm (2.59″) Spindle Speed (rpm) rpm 4,800 Motor output ( cont. / 30 min.) Hp / kW 20 HP (15kW) Motor (Max/Cont.) kW(HP) Torque (Max/Cont.) N.m 238 N-m Spindle Type – Direct Belt Drive Spindle Nose – A2-6 FEED Travel (X/Z) mm(in) (230mm (90’) (630mm (24.8’) Rapid Travel (X/Z) m/min 30 m/min Slide Type – Hardened & Ground Box Ways X-axis servo motor HP (KW) 2.1 HP ( 1.6 kW) Z-axis servo motor HP (KW) 4 HP ( 3.0 kW) BLOCK TOOL No. of Tool / Stations T 12 Tool Size OD mm(in) 25mm (1’) ID mm(in) 40mm (1’) TANK CAPACITY Coolant Tank Gallon / litre 55 gal (200L) Lubricating Tank ℓ(gel) POWER SUPPLY Electric Power Supply kVA 220 Thickness of Power Cable Sq Voltage KVa 200 MACHINE Dimensions
(L×WxH)mm(in) 78″ x 92″ x 68″ ( 1,975 x 2,235 x 1,725 mm ) Weight kg(lb) 3,500 kg (7,700lb) NC Controller FANUC Oi-TC -
Specifications
Description Unit GA-2000 L CAPACITY Max. / Swing over saddle mm(in) 580 mm (22.83″) Max. Turning Diameter mm(in) 350 mm (13.77″) Max. Turning Length mm(in) 1,204 mm (47.39″) Bar Capacity mm(in) 51 mm (2’) SPINDLE Chuck Size (in) (8″) Hole through spindle mm(in) 66mm (2.59″) Spindle Speed (rpm) rpm 4,800 rpm Motor output ( cont. / 30 min.) Hp / kW 20 HP (15kW) Motor (Max/Cont.) kW(HP) Torque (Max/Cont.) N.m 360 N-m Spindle Type – Direct Belt Drive Spindle Nose – A2-6 FEED Travel (X/Z) mm(in) (205mm (8.07’) (1,230mm (48.42”) Rapid Travel (X/Z) m/min 20 m/min Slide Type – Hardened & Ground Box Ways X-axis servo motor HP (KW) 2.1 HP ( 1.6 kW) Z-axis servo motor HP (KW) 4 HP ( 3.0 kW) BLOCK TOOL No. of Tool / Stations T 12 Tool Size OD mm(in) 25mm (1’) ID mm(in) 40mm (1’) TANK CAPACITY Coolant Tank Gallon / litre 38 gal (145L) Lubricating Tank ℓ(gel) POWER SUPPLY Electric Power Supply kVA 220 Thickness of Power Cable Sq Voltage KVa 26 kVa MACHINE Dimensions
(L×WxH)mm(in) 4,235 x 1,630 x 1,890 mm ( 166.7″ x 64.2″ x 74.4″ ) Weight kg(lb) 4,600 kg ( 10,120 lb ) NC Controller FANUC Oi-TC
Horizontal Turning Centers
CNC Lathe
Q: What is a Horizontal Turning Center (HTC) CNC Machine?
Horizontal Turning Centers are the most widely recognized CNC Machine here in Canada used by Parts Manufacturers for the Oil and Gas sector. With a horizontal turning center, the spindle is horizontally oriented, and tools are mounted out of the side of the tool holder and cut across the work-piece. Turning Centers is the best seller CNC Machine type in Canada, selling to factories and manufacturers for Oil and Gas applications.
Check out Frequently Asked Questions About Buying New HTC CNC machines.
Q: How Much Does an HTC CNC Machine Cost?
You’ll get Horizontal Turning Centers CNC Machines price range from $50,000 to $3 Million, depending on the various machine configurations. Whether you want to purchase a used or new CNC machine overseas, the final price will include the delivery costs, tax, and customs clearance fee.
Q: What Are the Common Applications for HTC CNC Machines?
There are tons of operations that can be performed on a lathe, and even more, that can be performed on a turning center CNC. The most common application is Threading, Facing, Knurling, Boring, Drilling, Reaming, and Tapering.
Q: What’s the Advantage of Horizontal over Vertical Turning Centers CNC Machines?
HTC are more flexible since it can have longer beds and therefore can machine longer pieces. HTC CNCs are the best choice if your machining concave parts where potential chips may get stuck inside the material. Its an overall cleaner machine compared to Vertical Turning Centers since the chips directly drop to the conveyor belt below.
Lamarche Machinery selling a wide selection of HTC CNC Machines. See our inventory below.
Horizontal Turning Centers
Available Option(s):
